• Smart Structures and Systems
• /
• 제6권3호
• /
• pp.263-275
• /
• 2010

In the last decade, wireless sensor networks have emerged as a promising technology that could accelerate progress in the field of structural monitoring. The main advantages of wireless sensor networks compared to conventional monitoring technologies are fast deployment, small interference with the surroundings, self-organization, flexibility and scalability. These features could enable mass application of monitoring systems, even on smaller structures. However, since wireless sensor network nodes are battery powered and data communication is the most energy consuming task, transferring all the acquired raw data through the network would dramatically limit system lifetime. Hence, data reduction has to be achieved at the node level in order to meet the system lifetime requirements of real life applications. The objective of this paper is to discuss some general aspects of data processing and management in monitoring systems based on wireless sensor networks, to present a prototype monitoring system for civil engineering structures, and to illustrate long-term field test results.

• 한국공간구조학회논문집
• /
• 제18권3호
• /
• pp.67-74
• /
• 2018

Recently, measuring instruments for SHM of structures has been developed. In general, the wireless transmission of sensor signals, compared to its wired counterpart, is preferable due to the absence of triboelectric noise and elimination of the requirement of a cumbersome cable. However, in extreme environments, the sensor may be less sensitive to temperature changes and to the distance between the sensor and data logger. This may compromise on the performance of the sensor and instrumentation. Therefore, in this paper, free vibration experiments were conducted using wireless MEMS sensors at an actual site. Measurement was assessed in time and frequency domain by changing the temperature variation at($-8^{\circ}C$, $-12^{\circ}C$ and $-16^{\circ}C$) and the communication distance (20m, 40m, 60m, 80m).

• 정보처리학회논문지D
• /
• 제9D권1호
• /
• pp.145-152
• /
• 2002

현재 대부분의 가정이나 소규모 기업에서는 인터넷 서비스를 이용하기 위하여 ADSL(Asymmetric Digital Subscriber Line)나 케이블모뎀을 사용한다. 4바이트로 구성되는 현재의 인터넷 IP 주소체계(IPv4)에서는 할당 가능한 IP 주소가 부족하여, 동적으로 공인(Public) IP 주소를 할당하는 방식을 사용하고 있다. 이러한 동적인 IP 주소를 할당받는 시스템은 모든 인터넷 서비스를 이용하는 데에는 아무런 제약이 없지만, 자신이 각종 인터넷 서버 기능을 수행하는 데는 많은 문제점이 있다. 본 논문에서는 동적으로 변하는 IP 주소를 가진 시스템에서 인터넷 서버 서비스(Telnet, FTP, HTTP, Mail 등)가 가능하도록 하는 게이트웨이(Gate-D)를 설계하였으며, 실험적으로 Gate-D를 이용한 Telnet 서버의 구축을 통하여 유용성을 확인하였다.

• 융합정보논문지
• /
• 제10권1호
• /
• pp.28-34
• /
• 2020

본 논문은 정보통신기술, 특히 인터넷 스트리밍의 등장이 미디어산업에 어떠한 영향을 미치며 이를 어떻게 재편해오고 있는가라는 측면에서 최근 디즈니사의 폭스사 인수를 고찰한다. 이를 통해 디즈니가 점증하는 스트리밍 서비스의 도전과 변화하는 미디어 환경에 어떻게 대응하는지 살펴본다. 논문은 먼저 디즈니의 폭스 인수와 스트리밍 서비스가 영화 및 미디어 산업에 가져온 변화와 도전을 고찰한다. 그리고 이에 대응하여 2019년 말에 시작될 디즈니의 자체 스트리밍 서비스를 고찰한다. 마지막으로 디즈니의 스트리밍 서비스 진출이 한편으로는 소비자들에게 직접 콘텐츠를 제공함으로써 커다란 이윤을 약속하지만 다른 한편으로는 현재 디즈니가 기반을 둔 기존 미디어 산업의 변화를 더욱 가속화시킬 것임을 지적한다.

• 한국통신학회논문지
• /
• 제27권7C호
• /
• pp.704-711
• /
• 2002

본 논문에서는 케이블 모뎀을 위한 DFE(Decision Feedback Equalizer) 구조의 blind 등화기를 설계하였다. 변복조 방식은 64/256 QAM이며 채널 적응 알고리즘으로는 제안한 MMA(Multi-Modulus Algorithm)와 LMS (Least Mean Square) 알고리즘을 같이 사용하였다. MMA 알고리즘과 DFE 구조를 가진 등화기는 본 논문에서 처음 제안한다. 기존의 MMA 등화기는 두 개의 FIR 필터를 사용하여 두 개의 탭 계수를 갱신하였으나, 본 논문에서 제안하는 MMA 알고리즘은 하나의 탭 계수 갱신만으로 채널 등화가 가능하도록 제안하였으며, DFE 구조에 적용하여 두 개의 DFE 필터를 사용하여 채널 적응 능력을 높히고 탭 수를 줄였다. 0.35 $\mu\textrm{m}$ standard cell library를 이용하여 ASIC 칩을 설계하였다. 설계한 등화기는 약 16만개의 게이트 수와 8 MHz의 동작속도를 보였으며 데이터 전송 속도는 64Mbps까지 지원한다.

• 로봇학회논문지
• /
• 제5권2호
• /
• pp.102-109
• /
• 2010

In this study, an anthropomorphic robot Hand, called "SKKU Hand III" is presented. The hand has thirteen DOF(Degree-Of-Freedom) and is designed based on the skeletal structure of the human hand. Each finger module(except thumb module) has three DOF and four joints with a saddle joint mechanism which has two DOF at the base joint. Two distal joints of the finger module are mechanically coupled by a timing belt and pulleys. The thumb module is composed of a finger module and an additional actuator, which makes it possible to realize the opposition between the thumb and the other fingers. In addition, the palm DOF of the human hand is mimicked with a spatial link mechanism between the index finger and the thumb. Thus, it can grasp objects more stably and more strongly. For the modularization of the robotic hand all the driving circuits are embedded in the hand, and only the communication lines supporting CAN protocol with DC power cable are given as an interface. Therefore, it is possible to apply it to any robot system the interface. To validate the feasibility of the SKKU Hand III, a series of the representative grasp experiments such as power, precision, intermediate grasp etc. are carried out with the object around us and its operation is demonstrated.

• 한국위성정보통신학회논문지
• /
• 제5권1호
• /
• pp.1-5
• /
• 2010

최근 전자 정보 통신 기술의 발전으로 개개인이 요구하는 정보의 전송량도 증가하고 있다. 특히 CATV의 전송량 증가에 따른 전송 성능의 향상이 불가피하다. 따라서 본 논문에서는 DOCSIS(Data-Over-Cable Service Interface Specifications) 2.0 요구 규격을 만족하는 CATV 전송 시스템에서 Bit Error Rate(BER)에 따른 최적의 Signal to Noise Ratio(SNR) 성능 요구 특성을 얻기 위한 위상 잡음 특성을 분석하였다. 특히 개발된 시뮬레이터를 이용하여 CATV 전송 시스템 위상 잡음 특성 요구 규격을 만족하는 Phase Locked Loop(PLL) 구성 요소 파라미터 값들을 도출하였다. 제시된 방법은 향후 초고속 CATV 전송 시스템의 위상잡음 관련 성능 요구 규격도출에 이용될 수 있다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.87-92
• /
• 2003

According to the realization of highly information dependent society, the recent building system is developed into the concept of suitable for management of intellegent work, which is demanded to unify of IBS(Intelligent Building System), IC(information communication), OA(office automation), BA(building automation) system and computer technology. However inspite of the presence arrester, cable shielding, insulated TR, filter, earth etc., in the IBS building for the cope with several surge and noise has several problems from the wrong operation of the equipment which caused from several surge, damage of equipment, and noise etc. And the miss operation caused by wrong earth works, which must be considered at first during the building construction. In order to minimize these problems, it's necessary that various earth project are performed effectively, and bonding methods between the mutual wiring of earth system and the equipments in the building should be improved sucessively. So in this paper, we analyze present domestic conditions of the earth technology in IBS building, and propose minimization method for the various surge and noise problem, and examine and analyze through the applied works.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.357-363
• /
• 2014

A programmable smart charger compatible to various load conditions is proposed in this paper. Since the proposed smart charger is compatible to various mobile devices having different rated voltage and power, it is convenient for carrying and easy to standardize many kinds of battery chargers. Moreover, since it uses the input impedance and built-in PMIC (Power management IC) of the load system to recognize the connection state and specifications of load system, hardware changes of load system is not only hardly necessary but it also features no addition communication cable and easy implementation. To confirm the validity of the proposed charger, the theoretical analysis and experiment results from a prototype compatible to three load conditions 5V/1A, 5V/2A and 12V/1A are provided.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.408-409
• /
• 2007

Ferrule function have connect Optical Communication Cable. But Ferrule have important role that is decided transmission efficiency and information quality. Key-point of detailed drawing of ferrule is Anti-Reflection. In the study Broadband Anti-Reflection coating Film was design for ferrule of optical connector and deposited in low temperature by Ion-Assisted Deposition system. Optical thin film materials($Ta_2O_5$, $SiO_2$) were manufactured Index and Film thickness. $Ta_2O_5$ index is 2.123 ~ 2.125 and $SiO_2$ is 1.44 ~ 1.442. Reflection Loss of film deposited on Ferrule is 30.1[dB].