• 제목/요약/키워드: communication cable

검색결과 439건 처리시간 0.028초

지하철 무선통신설비와 주파수 공용 전화방식의 연계방안에 관한 연구 (A Study about coordinate schemes of radio and TRS(Trunked Radio System) in subway)

  • 어용;김명수;이병송
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2003년도 추계학술대회 논문집(III)
    • /
    • pp.210-215
    • /
    • 2003
  • At present, communication network for subway is making use of the train radio system for main network and normally established a base station every three subway station. It is talk over the telephone between a locomotive and the traffic control for careful train service. Besides, mobile telephone equipment is using for service improve and convenience to passengers such as 011, 016, 017, 019 and what not. However, the train radio system has been occurring a various problems when a state of emergency because it is able to compose only one communication route each base station zone. We could have improving like this problems through induce the TRS(Trunked Radio System), though because have been able to compose multilateral communication route in case of linking with LCX(Leaked Coaxial) cable which is established. Therefore, we could be able to a fitting meet the emergency as train firing etc.. and efficient use of limited frequency resources.

  • PDF

전력구 터널 건설안전 확보를 위한 디스크커터 마모측정시스템 시작품 개발 및 성능검증 (Development of disc cutter wear sensor prototype and its verification for ensuring construction safety of utility cable tunnels)

  • 김정주;류희환;송승우;도승철;이지윤;정호영
    • 한국터널지하공간학회 논문집
    • /
    • 제26권2호
    • /
    • pp.91-111
    • /
    • 2024
  • 전력구 터널은 송전선로 지중화 사업의 일환으로 대부분의 경우 쉴드 TBM을 활용하여 건설된다. TBM 챔버는 터널 내부 중 유일하게 암반과 흙을 마주하는 공간이며, 붕락과 부딪힘 사고 등 사고노출 빈도가 가장 높은 곳이다. 현재 챔버 외부에서 디스크커터 마모정도를 측정할 수 있는 방법이 부재하기 때문에 근로자의 수시점검이 필수적이다. 이에 본 연구에서는 TBM 챔버 내부 안전사고를 예방하고, 챔버 오픈회수 절감을 통해 공사기간 단축의 효과를 기대하기 위하여 디스크커터 마모측정 기술 개념을 정립하고, 시작품을 제작하였다. 선행기술을 고찰하여 자기센서가 굴착환경에서 가장 적합하다고 판단하여, 자기센서, 무선통신 모듈, 전원공급, 외부 케이싱, 그리고 모니터링 시스템을 종합한 마모측정 센서 패키지를 개발하였다. 실제 굴착환경에서 시작품 성능검증을 수행하기 위해 3.6 m 토압식 쉴드 TBM을 활용한 실대형 굴진시험을 수행하였다. 실대형 굴진시험 결과 8개의 시작품 중 5개가 정상적으로 작동하였다. 최대 3,000 kN의 추력과 1.5 RPM의 회전속도 안에서 센서측정값이 무선통신을 통해 시스템에 원활하게 표출되는지 확인하였고, 센서 케이싱이 파손되지 않아 내구성을 확보하는 것으로 분석되었다.

대덕 지역정보망에의 OSI 상위계층 프로토콜 접속 연구 (An OSI IMPLEMENTATION ON DAEDUK SCIENCE COMPLEX NETWORK)

  • 최선완;박승철;채의근;한기수;최양희;이영희
    • 한국통신학회:학술대회논문집
    • /
    • 한국통신학회 1988년도 추계학술발표회 논문집
    • /
    • pp.144-147
    • /
    • 1988
  • 대덕망에 Osi 프로토콜을 구현하기 위한 일련의 작업들은 ETRI의 Osi Group 에 의해서 1985년경부터 시작이 되었다. 현재 Osi의 FTAM(File transfer Access and Managenemt) 프로토콜과 ACSE (Association Control Service Element) presentation 계층 session 계층이 상위계층 프로토콜로 구현되었으며, 상위 계층에서 필요한 통신 서비스를 제공하귀 위해서 transport 계층 및 대덕 man의 통신 서비스를 이용하기 위한 intertiace 들이 구혀되었다. 이러한 interface는 순차적으로 jualring optical cable을 control 하여 대덕 man에 위치한 node들 사이에 Osi 상위계층 프로토콜의 서비스를 제공하게 된다.

  • PDF

광 LAN을 적용한 765kV변전소 감시제어 시범시스템 설계 (Prototype design of fiber optics based 765kV substation control system)

  • 송인호;박종화;최종협
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
    • /
    • pp.996-999
    • /
    • 1996
  • This paper introduces prototype design of 765kV Substation control system based on fiber optics LAN and distributed network protocol. Two major important facts, immunity of any surge which frequently occurs in Ultra High Voltage Substation and the most suitable communication protocol for substation control system, are considered on the system design conception. To meet the first fact, use of fiber optics cable and isolation transformer are considered, and to satisfy the second fact, DNP3.0(Distributed Network Protocol) which is IEC870-5 compatible is adopted.

  • PDF

와전류 센서를 이용한 케이블용 내부 열화 검출 방법 (Detecting Method of Internal Degradation for Cable using Finite Element Method)

  • 박건호
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2015년도 제51차 동계학술대회논문집 23권1호
    • /
    • pp.291-292
    • /
    • 2015
  • 와전류 탐상 기법을 이용하여 배전선로의 내부 열화를 검출하는 시스템을 개발할 수 있는데, 본 연구에서는 이를 위하여 유한요소법을 통한 시뮬레이션으로 와전류 센서의 기초 모델링을 구상한 후 실제 와전류 센서를 제작하여 가속 열화에 의한 센서 특성을 조사하였다.

  • PDF

HFC 전송망을 이용한 UPS 원격관리 시스템의 설계와 구현 (Design and Implementation UPS Management System in HFC Network)

  • 김영화;강준우
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
    • /
    • pp.75-78
    • /
    • 2002
  • Since power failures in high-speed communication network, especially in HFC(Hybrid Fiber Coaxial cable) network are critical, microcontroller-based UPS(Uninterrupted Power Supply) are commonly used in the network. Hardware and software of UPS management system is designed and implemented to monitor and control UPS status to supply electric power to ONU and TBA in the HFC network. The result of laboratory tests and field tess of this system shows the scan rate to be 1 to 10 minutes to sufficiently monitor the status of UPS in the network.

  • PDF

프로토콜 모니터링 및 에뮬레이션 기능을 제공하는 블루투스 프로토콜의 교육용 소프트웨어 (Educational Software Development of Bluetooth Protocol for Protocol Monitoring and Emulation)

  • 정중수
    • 한국콘텐츠학회논문지
    • /
    • 제4권1호
    • /
    • pp.1-7
    • /
    • 2004
  • 오늘날 무선통신 기술은 기존 유선 통신방식에 추가하여 매우 주목받고 있는 정보통신 혁명을 주도하였다. 무선 통신에서 자체 피코넷(piconet)을 형성하여 음성이나 데이터 통신을 수행하는 블루투스 기술은 많은 응용분야에 적용되고 있으며, 나아가 액세스 망을 통해 공중망과 접속 가능하게 되었다. 본 논문에서는 블루투스 프로토콜의 기술교육을 위하여 프로토콜 스택의 핵심인 HCI, L2CAP, RFCOMM, SDP와 프로파일의 핵심인 GAP, SPP, GEOP, FTP을 모니터링 및 에뮬레이션하기 위한 프로그래밍 기법의 제반 환경을 체계적이고 쉽게 서술하였다. 이러한 기능은 블루투스 디바이스와 RS-232-C, BSB 또는 UART 인터페이스로 접속된 PC 환경에서 비주얼 C로 작성된 응용 프로그램으로 수행되며, 블루투스 디바이스에 실장된 펌웨어와 인터페이스를 수행하여 개발되었다. 아울러 개발된 소프트웨어를 활용하여 파일 전달 및 채팅 기능을 부가적으로 제공하여 교육의 효율을 높이고자 하였다.

  • PDF

BILBO Network: a proposal for communications in aircraft Structural Health Monitoring sensor networks

  • Monje, Pedro M.;Aranguren, Gerardo
    • Structural Monitoring and Maintenance
    • /
    • 제1권3호
    • /
    • pp.293-308
    • /
    • 2014
  • In the aeronautical environment, numerous regulatory and communication protocols exist that cover interconnection of on-board equipment inside the aircraft. Developed and implemented by the airlines since the 1960s, these communication systems are reliable, strong, certified and able to contact different sensors distributed throughout the aircraft. However, the scenario is slightly different in the structural health monitoring (SHM) field as the requirements and specifications that a global SHM communication system must fulfill are distinct. The number of SHM sensors installed in the aircraft rises into the thousands, and it is impossible to maintain all of the SHM sensors in operation simultaneously because the overall power consumption would be of thousands of Watts. This design of a new communication system must consider aspects as management of the electrical power supply, topology of the network for thousands of nodes, sampling frequency for SHM analysis, data rates, selected real-time considerations, and total cable weight. The goal of the research presented in this paper is to describe and present a possible integration scheme for the large number of SHM sensors installed on-board an aircraft with low power consumption. This paper presents a new communications system for SHM sensors known as the Bi-Instruction Link Bi-Operator (BILBO).

방사선 검사 관련 의료장비와 PACS 간의 연동을 위한 DICOM 및 Non-DICOM 인터페이스 방안 (Methods of DICOM and Non-DICOM Interfacing for various Radiological Equipments with PACS)

  • 김현철
    • 대한디지털의료영상학회논문지
    • /
    • 제6권1호
    • /
    • pp.51-64
    • /
    • 2003
  • This thesis describes the effective interfacing methods of PACS Modality based on the system installation andoperating experiences. PACS(Picture Archiving and Communication Systems) is a system for medical image archiving and communication using large storage device and high-speed network. The standard communication protocol of PACS is DICOM(Digital Imaging and Communication in Medicine) based on TCP/IP and point-to-point protocol. However, there are many Non-DICOM Modalities and DICOM Modalities having problems. First, we had interfaced almost modalities. Fuji CR, GE CT, MRI, Angio, Fluoro, Phillips Angio, Shimadzu Fluoro. Ultrasound PACS, with the main PACS in the Seoul S Hospital as large scale hospital. And we manipulated the intelligent image distribution and the CT. MRI Interfaces never experienced beforein the Anyang J Hospital and the Chungju C Hospital as mid or small scale hospital. Technically, we developed both the DICOM Interface and the Non-DICOM Interface. At the last, the DICOM Worklist and the DICOM Print Interface were implemented in the Seoul B Hospital, the Bucheon SJ Hospital and the Seoul K Hospital independently with PACS. The Oracle, Sybase and MS-SQL are used as database, and UNIX, Macintosh, MS Windows as operating systems. And the Visual C++ and UNIX C are the main programming tools. We have used UTP, coaxial and fiber optic cable under 10/100 mbps LAN for networking.

  • PDF