• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.493-498
• /
• 2004

The EMI noise source in a switching mode power supply is dominated by a common mode noise. If we can understand the common mode noise occurring mechanism, it is resulted to find out the method to suppress the EMI noise source in the switching mode power supply. The common mode noise is occurring mostly due to circuit is unbalanced which is caused by the capacitive coupling to frame ground, which passes through a heatsink of the switching devices. This research paper presents a new effective balancing method of buck converter circuit by mean of grounding the parasitic and compensation capacitors in correct proportion which is called that the common mode impedance balance (CMIB). The CMIB can be achieved by source, transmission line and termination balanced, such balancing, the common mode current will be cancelled out in the frame ground. The greatly reduced common mode noise can be confirmed by the experimental results.

• 전자공학회논문지B
• /
• 제32B권11호
• /
• pp.1374-1382
• /
• 1995

In TFT-LCDs, as the display size area becomes larger, and the resolution higher, we have to consider the image degradation effects due to the incorporation of the TFT-LCD parameters such as the data-line resistance, the common electrode resistance, the data-line to common parasitic capacitance, and the output characteristics of driver ICs. One of the degradation effects is crosstalk resulting from the coupling between the source bus-line and common electrode. Since a source signal which represents a large number of display data is supposed to vary frequently, the common signal level is affected through the coupling effect, resulting in the degradation of nearby pixel drive signals. Therefore, we proposed a method to compensate for this source-common electrode coupling effect, we also designed and experimented the feasibility of our crosstalk compensation circuit in the actual TFT-LCD. We saw that the newly designed compensation circuit greatly reduced the crosstalk in display pattern image.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.6-14
• /
• 2014

A new method to determine the total harmonic contributions of several customers and the utility at the point of common coupling is presented. The proposed method can quantify the individual harmonic impact of each suspicious harmonic source at the point of common coupling. The individual harmonic impact index is then used to assess the total harmonic contribution of each harmonic source. This index can be calculated by the results processed from instantaneous harmonic voltage and current phasor values. The results demonstrate the performance of the proposed method in terms of steady-state accuracy and response to time-varying operating conditions. The proposed index can be used for billing purposes to control harmonic distortion levels in power systems.

• 대한전자공학회논문지SD
• /
• 제49권2호
• /
• pp.9-14
• /
• 2012

본 연구에서는 common source-bulk와 common source-gate 테스트 구조에서 측정된 S-파라미터를 사용하여 multi-finger RF MOSFET의 기판 파라미터들을 정확하게 추출하였다. 이 추출 방법을 바탕으로 세 개의 기판저항을 사용한 비대칭 RF 모델이 하나의 기판저항을 사용한 단순 모델보다 측정된 Y-파라미터 데이터와 더 잘 일치하는 것을 관찰하였으며, 이는 비대칭 기판 모델의 정확도를 증명한다. 또한 비대칭 RF 모델의 시뮬레이션 S-파라미터가 측정 데이터와 20GHz까지 잘 일치하는 것을 확인하였다.

• 전력전자학회논문지
• /
• 제14권4호
• /
• pp.285-292
• /
• 2009

본 논문은 다이오드 정류기와 Z-소스 인버터로 교류전동기 구동 시 암 단락 (shoot-through) 상태와 비 암 단락 상태를 나누어 각각 등가회로를 구성하고 공통모드 전압을 분석한다. 음의 값의 공통모드 전압을 감소시키기 위하여 암 단락 시간 제어와 함께 영전압 벡터인가 구간을 제거하는 변형 공간벡터변조기법을 제시한다. PSIM과 32-비트 DSP를 사용한 실험 및 시뮬레이션 결과를 통하여 음의 공통모드전압이 50%이상 감소됨을 확인하였다.

• 한국소프트웨어감정평가학회 논문지
• /
• 제14권2호
• /
• pp.35-44
• /
• 2018

서로 다른 언어로 작성된 소스코드의 유사성 검사는 주로 요약구문트리를 기반으로 비교를 수행한다. 하지만 대규모의 소스코드를 실용적인 수준으로 비교하려면 토큰수준 기반에서 작동하는 유사성 검사 기술이 필요하다. 본 연구에서는 서로 다른 언어에서 생성되었지만 같은 의미를 지닌 토큰을 표현할 수 있는 공통 토큰을 정의하고, 소스코드에서 언어별 처리 과정을 거쳐 생성한 공통 토큰의 나열을 입력으로 소스코드의 유사성 검사를 수행하는 방법을 제안한다. 한국저작권위원회의 표절검사 도구 exEyes를 사용해서 서로 다른 언어로 작성된 동일한 코드를 대상으로 실험한 결과, 제안한 방법을 사용했을 때, 유사성 평가 성능이 향상됨을 보였다.

• 전력전자학회논문지
• /
• 제27권2호
• /
• pp.92-99
• /
• 2022

Due to space and geographical constraints, the power source may be located outside the island area, resulting in the considerable length of transmission line. In these cases, when an active power is transmitted, unexpected reactive power is generated at a point of common coupling (PCC). Unlike the power transmitted from the power generation source, the reactive power adversely affects the system. This study proposes a new algorithm that controls reactive power at PCC. Causes of reactive power errors are separated into parallel and series components, which allows the algorithm to compensate the reactive current of the inverter output and control reactive power at the PCC through calculations from the impedance, voltage, and current. The proposed algorithm has economic advantages by controlling the reactive power with the inverter of the power source itself, and can flexibly control power against voltage and output variations. Through the simulation, the algorithm was verified by implementing a power source of 3 [kVA] capacity connected to the low voltage system and of 5 [MVA] capacity connected to the extra-high voltage system. Furthermore, a power source of 3 [kVA] capacity inverter is configured and connected to a mock grid, then confirmed through experiments.

• 스마트미디어저널
• /
• 제4권2호
• /
• pp.55-61
• /
• 2015

A bandwidth-enhanced ultra-wide band (UWB) CMOS balun-LNA is implemented as a part of a software defined radio (SDR) receiver which supports multi-band and multi-standard. The proposed balun-LNA is composed of a single-to-differential converter, a differential-to-single voltage summer with inductive shunt peaking, a negative feedback network, and a differential output buffer with composite common-drain (CD) and common-source (CS) amplifiers. By feeding the single-ended output of the voltage summer to the input of the LNA through a feedback network, a wideband balun-LNA exploiting negative feedback is implemented. By adopting a source follower-based inductive shunt peaking, the proposed balun-LNA achieves a wider gain bandwidth. Two LNA design examples are presented to demonstrate the usefulness of the proposed approach. The LNA I adopts the CS amplifier with a common gate common source (CGCS) balun load as the S-to-D converter for high gain and low noise figure (NF) and the LNA II uses the differential amplifier with the ac-grounded second input terminal as the S-to-D converter for high second-order input-referred intercept point (IIP2). The 3 dB gain bandwidth of the proposed balun-LNA (LNA I) is above 5 GHz and the NF is below 4 dB from 100 MHz to 5 GHz. An average power gain of 18 dB and an IIP3 of -8 ~ -2 dBm are obtained. In simulation, IIP2 of the LNA II is at least 5 dB higher than that of the LNA I with same power consumption.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권7호
• /
• pp.374-379
• /
• 2006

The switch mode power supply is a source of EMI with other equipment as well as with its own proper operation because of rapid changes in voltages and currents within a switching converter. The EMI is transmitted in two forms: radiated and conducted. Conducted noise consists of two categories known as the differential mode and the common mode. Common mode noise current is a major source of EMI in the switch mode Power supply. Recently, a current balancing technique has been studied to reduce the common mode noise. This paper investigates the reduction of common mode noise according to a node expansion of the switch mode power supply which is based on a current balancing technique. In this paper, seven PCB patterns of the forward converter are manufactured and experimented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.829-832
• /
• 2007

A high-speed and accurate analog buffer is proposed for mobile display using LTPS TFTs. The proposed analog buffer is common source type with sampling and negative feedback mode. Therefore, driving speed of the proposed buffer is faster than previously reported one. In addition, the accuracy is very high because of high negative feedback gain. The simulation results show that maximum mischarging voltage of the proposed buffer is 8mV and previously reported one is 37mV. And Power consumption of the proposed buffer is $43.1{\mu}W$, which is 73% of previously reported one.