• Title/Summary/Keyword: commercial gains

Search Result 58, Processing Time 0.029 seconds

Design of an Planar Inverted -F Antenna With Wide band Characteristic (광대역 특성을 갖는 역 F형 내장형 안테나의 설계)

  • Jung, Hee-Kyung;Park, Hoon;Choi, Jae-Hoon
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2005.11a
    • /
    • pp.249-254
    • /
    • 2005
  • This paper presents the design of a novel small and wide band planar inverted F-antenna which simultaneously covers GSM900/GPS/DCS1800/DCS1900/DMB service. The proposed antenna consisting of a main patch with rectangular slit, strip 1 and strip 2, occupied the total volume of.$15\times36\times6mm^3$. A very wide impedance bandwidth characteristic was achieved by optimizing both the distance between the feed line and short strip and the length of rectangular slit on the main patch. The commercial electromagnetic software, CST Microwave Studio, is used to design the structure. The maximum gains at the frequencies of 900, 1575, 1800, 1900, and 2600 MHz were 2.07, 1.07, 1.69 and 0.55, -1.99 dBi, respectively. The overall shape of the radiation patterns is suitable for mobile communication application.

  • PDF

Design and Implementation of A Microstrip Antenna for Satellite-DMB (위성 DMB용 마이크로스트립 안테나 설계 및 제작)

  • Ahn, Je-Sung;Seo, Yu-Jung;Ha, Deock-Ho
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2007.06a
    • /
    • pp.856-860
    • /
    • 2007
  • In this paper, we propose a microstrip antenna with sufficient impedance bandwidths and gains for the 2.65GHz antenna which used in the satellite digital multimedia broadcasting. The proposed 2.65GHz S-DMB bandwidth microstrip antenna on a substrate, which is small enough to be installed in practical mobile phones, and described simulation feature using by CST Microwave Studio program. The measured result is similar with commercial antenna and acceptable frequency band is found that more wide than the existing products.

  • PDF

An Image Signal Processor for Ultra Small HDGrade Video Sensor with 3A in Camera Phones

  • Jang, Won-Woo;Kim, Joo-Hyun;Han, Hag-Yong;Yang, Hoon-Gee;Kang, Bong-Soon
    • Journal of information and communication convergence engineering
    • /
    • v.7 no.4
    • /
    • pp.507-515
    • /
    • 2009
  • In this paper, we propose an image signal processor (ISP) for an ultra small HD-grade video sensor with 3A (AWB, AE, and AF) in camera phones that can process 720P/30fps videos. In order to enhance the video quality of the systems, it is necessary to achieve the high performance of the 3A. The proposed AWB algorithm multiplies the adjusted coefficients of color gains to the captured data of white objects. The proposed AE method adopts the index step moving based on the difference between an averaged Y luminance and a target luminance, together with IIR filters with variable time responses. The proposed AF technique controls the focus curve to find the lens position that maximizes the integrated high frequency components in luminance values by using highpass filters. Finally, we compare the image quality captured from our system to the quality of a commercial HD camcorder in order to evaluate the performance of the proposed ISP. The proposed ISP system is also fabricated with 0.18um CMOS flash memory process.

DEVELOPMENT OF A STEAM GENERATOR TUBE INSPECTION ROBOT WITH A SUPPORTING LEG

  • Shin, Ho-Cheol;Jeong, Kyung-Min;Jung, Seung-Ho;Kim, Seung-Ho
    • Nuclear Engineering and Technology
    • /
    • v.41 no.1
    • /
    • pp.125-134
    • /
    • 2009
  • This paper presents details on a tube inspection robotic system and a positioning method of the robot for a steam generator (SG) in nuclear power plants (NPPs). The robotic system is separated into three parts for easy handling, which reduces the radiation exposure during installation. The system has a supporting leg to increase the rigidity of the robot base. Since there are several thousands of tubes to be inspected inside a SG, it is very important to position the tool of the robot at the right tubes even if the robot base is positioned inaccurately during the installation. In order to obtain absolute accuracy of a position, the robot kinematics was mathematically modeled with the modified DH(Denavit-Hartenberg) model and calibrated on site using tube holes as calibration points. To tune the PID gains of a commercial motor driver systematically, the time delay control (TDC) based gain tuning method was adopted. To verify the performance of the robotic system, experiments on a Framatomes 51B Model type SG mockup were undertaken.

Design and manufacture of a self-powered quadcopter (자가발전형 쿼드콥터 설계 및 제작)

  • Lee, Yun Seong;Kim, Yoonsoo
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.44 no.5
    • /
    • pp.431-438
    • /
    • 2016
  • In this paper, a self-powered quadcopter is designed and manufactured. The quadcopter gains extra power via two types of generators which utilize the principle of electromagnetic induction. One of the types is to make use of a commercial BLDC motor which rotates together with a propeller and thus acts as a generator. The other type is to make use of a coil-wound ring around a propeller which generates electricity when small magnets embedded in a uniquely designed frame rotate together with the propeller. The proposed generators are expected to be of practical use when they are located under the propellers of a quadcopter.

Design of Electronic Ballast for HID Lamps (HID 램프용 전자식 안정기의 설계)

  • 이치환
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.13 no.4
    • /
    • pp.14-20
    • /
    • 1999
  • This paper presents a design techniques for an electronic ballast of HID lamps. An electronic ballast for HID lamps usually employs a high-frequeocy resonant inverter and voltage-to-frequency converter to control the outpIt and a half-bridge and series resonant circuit are chosen for the ballast First, to design PI controller, the inverter with V/F converter is modeled with a transfer function and the controller PI gains are determined. This paper shows that an integral controller is only needed to control the current. Second, a se1f-feedback controller is proposed. This structure, simple and robust, is analyzed and a feedback gain is determined by using the inverter model. Experirrental system is built with a commercial 250W high pressure sodium lamp and the results show a validity of the proposed ballast and the total efficiency is increased by 5%.

  • PDF

Development of Multiple RLS and Actuator Performance Index-based Adaptive Actuator Fault-Tolerant Control and Detection Algorithms for Longitudinal Autonomous Driving (다중 순환 최소 자승 및 성능 지수 기반 종방향 자율주행을 위한 적응형 구동기 고장 허용 제어 및 탐지 알고리즘 개발)

  • Oh, Sechan;Lee, Jongmin;Oh, Kwangseok;Yi, Kyongsu
    • Journal of Auto-vehicle Safety Association
    • /
    • v.14 no.2
    • /
    • pp.26-38
    • /
    • 2022
  • This paper proposes multiple RLS and actuator performance index-based adaptive actuator fault-tolerant control and detection algorithms for longitudinal autonomous driving. The proposed algorithm computes the desired acceleration using feedback law for longitudinal autonomous driving. When actuator fault or performance degradation exists, it is designed that the desired acceleration is adjusted with the calculated feedback gains based on multiple RLS and gradient descent method for fault-tolerant control. In order to define the performance index, the error between the desired and actual accelerations is used. The window-based weighted error standard deviation is computed with the design parameters. Fault level decision algorithm that can represent three fault levels such as normal, warning, emergency levels is proposed in this study. Performance evaluation under various driving scenarios with actuator fault was conducted based on co-simulation of Matlab/Simulink and commercial software (CarMaker).

Effect of choline chloride supplementation on milk production and milk composition of Etawah grade goats

  • Supriyati, Supriyati;Budiarsana, I. Gusti Made;Praharani, Lisa;Krisnan, Rantan;Sutama, I. Ktut
    • Journal of Animal Science and Technology
    • /
    • v.58 no.8
    • /
    • pp.30.1-30.12
    • /
    • 2016
  • Background: The effect of choline chloride supplementation through forced drinking combined with concentrate diets containing Ca-fish oil on milk production and milk composition of Etawah Grade goats was evaluated. Choline chloride is an essential component in ruminant diets as it is required for fat metabolism. Method: The experiment was conducted in a completely randomized block design with three types of treatments and eight replications. The trial had two successive experimental periods; the first, during the eight weeks of late pregnancy, and the second, during the first 12 weeks of lactation. Twenty-four Etawah Grade does in the second gestation period were divided into three treatment groups. Commercial choline chloride 60 % in corncobs-based powder was used as a source of choline chloride. The treatments were no supplementation (control) and supplemented with either 4 g or 8 g/2days of choline chloride. Choline chloride was given to the animals through a forced drinking technique, after dissolving it in 60 ml drinking water. The initial body weight of does was $38.81{\pm}3.66kg$. The does were penned individually, and were given fresh chopped King Grass ad libitum and 700 g/day of concentrate diets containing Ca-fish oil, starting eight weeks prior to expecting kidding and continuing for 12 weeks of parturition. Results: All nutrient intakes were not significantly different (p > 0.05) among the treatments during the late pregnancy and the lactation periods. Supplementation did not affect (p > 0.05) the average daily gains and feed conversion ratio during pregnancy but gave effects (p < 0.05) on the average daily gains, feed conversion ratio and income over feed cost during lactation. The highest average daily milk yields and 4 % fat corrected milk yields were found in goats supplemented with 4 g/2days of choline chloride and increased by 17.00 % and 24.67 %, respectively, compared to the control. Moreover, milk composition percentage and milk constituent yields improved significantly (p < 0.05) in those supplemented with 4 g/2days of choline chloride. Conclusion: The supplementation of 4 g/2days of choline chloride through forced drinking increased milk yields, the 4 % fat corrected milk yields, milk composition, milk constituent yields, and improved feed conversion ratio and income over feed cost of Etawah Grade goats.

Estimation of Weaning Age Effects on Growth Performance in Berkshire Pigs

  • Do, C.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.25 no.2
    • /
    • pp.151-162
    • /
    • 2012
  • Analysis for back fat thickness (BFAT) and daily body weight gains from birth to the end of a performance test were conducted to find an optimal method for estimation of weaning age effects and to ascertain impacts of weaning age on the growth performance of purebred Berkshire pigs from a closed population in Korea. Individual body weights were measured at birth (B), at weaning (W: mean, 22.9 d), at the beginning of the performance test (P: mean, 72.7 d), and at the end of the performance test (T: mean, 152.4 d). Further, the average daily gains in body weight (ADG) of 3,713 pigs were analyzed for the following periods: B to W (DGBW), W to P (DGWP), P to T (DGPT), B to P (DGBP), B to T (DGBT), and W to T (DGWT). Weaning ages ranged from 17 to 34 d, and were treated as fixed (WF), random with (WC) and random without (WU) consideration of an empirical relationship between weaning ages in the models. WF and WC produced the lowest AIC (Akaike Information Criterion) and least fractions of error variance components in multi-traits analysis, respectively. The fractions of variances due to diverse weaning age and the weaning age correlations among ADGs of different stages (when no overlapping allowed) by WC ranged from 0.09 to 0.35 and from -0.03 to 0.44, respectively. The maximum weaning age effects and optimal back fat thicknesses were attained at weaning ages of 27 to 32 d. With the exception of DGBW, the effects of weaning age on the ADGs increased (ranging from 1.50 g/d to 7.14 g/d) with increased weaning age. In addition, BFAT was reduced by 0.106 mm per increased day in weaning age. In conclusion, WC produced reasonable weaning age correlations, and improved the fitness of the model. Weaning age was one of crucial factors (comparable with heritability) influencing growth performance in Berkshire pigs. Further, these studies suggest that increasing weaning age up to 32 d can be an effective management strategy to improve growth performance. However, additional investigations of the costs and losses related to extension of the suckling period and on the extended range of weaning age are necessary to determine the productivity and safety of this practice in a commercial herd and production system.

Band-Rejected UWB Antenna Using Unit Cells of FSS (FSS 단위 셀을 이용한 대역저지 UWB 안테나)

  • Lee, Chang Yong;Jung, Chang Won
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.7
    • /
    • pp.3431-3436
    • /
    • 2013
  • Band-notched ultra-wideband (UWB) antennas using frequency selective surfaces (FSSs) are presented. The proposed antennas utilized the band rejection characteristic of typical FSS unit cells. We loaded the FSS unit cells on the same plane of planar UWB antenna. These antennas are designed to reject the interference from the wireless local area network band, 5.15-5.825 GHz in the UWB band, 3.1-10.6 GHz. The measured peak gains of the proposed antennas are more than 2 dBi at both operation edge and center frequencies, and sufficient to apply for commercial purpose. The antennas are small size and planar shape for the purpose of the small mobile application, and enhanced design freedom by using various existing FSS unit cells.