• The Korean Journal of Community Living Science
• /
• v.23 no.2
• /
• pp.137-144
• /
• 2012

This study was undertaken to develop protective gloves for rose farmers who work on thorny plant in Korea. Prototype of protective gloves was designed and evaluated in terms of thermal comfort and mobility. Gloves were made with arm protectors attached to them, so that they could protect the lower part of arms, and rubber bands were inserted into the arm protectors for them not to slip down. The bending part of each finger was punched in order to give ventilation. Also, the bending parts of the fingers in the upper and lower part of gloves were inserted with sponges and were stitched together in order to enhance gripping movement. According to compared evaluation of the developed gloves and the existing gloves, temperature inside the gloves didn't show any significant differences, but humidity inside the gloves showed significant differences. There were significant differences in terms of comparison of objective mobility, that is, pegboard run-time and grip power, from statistical aspects. In addition, a comparison of subjective discomfort showed significant differences and so the suitability of developed gloves was proved.

• Journal of East-West Nursing Research
• /
• v.6 no.1
• /
• pp.37-45
• /
• 2001

The purpose of this study was to identify the effect of hand acupuncture for reduction of dysmenorrhea. 71 female middle school and high school students were selected as subjects from April to May 2001, among which 38 students consisted of the experimental group while 22 students were the control group by convenient assignment. The experimental group participated in hand acupuncture treatment. The experimental treatment was to puncture corresponding points(A4, A5, J1, J3, J23, H2, F7) on both the palm and back of a hand with disposable acupuncture needles and to remove needles after 20-30 minutes' recess during which the subjects reposed themselves on bed. The collected data were processed using the SPSS PC Program and analyzed using $X^2test$ and The results of this study were as follows 1. The symptoms of premenstrual syndrome have decreased, but no significant differences were statistically observed between hand-acupunctured group and non-hand acupunctured group. 2. Subjective pain degree has decreased after hand acupuncture. 3. As for objective pain degree, a significant reduction in voice change was observed between two groups. Facial expressional changes and perspiration degree reduced but showed no significant statistically changes between two groups. 4. Comfort has increased after hand acupuncture. These results suggest that the hand acupuncture therapy works effectively on easing menstrual pain and symptoms as well as partially on reducing discomfort. It is particularly efficacious for a reduction in subjective pain and facial expressional changes in positive respect. Therefore the hand acupuncture therapy can be considered as an independent nursing intervention for dysmenorrhea reduction.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2009

STATEMENT OF PROBLEM. Poor wettability of denture relining materials may lead to retention problems and patient discomfort. PURPOSE. Purpose of this study is to compare and evaluate wettability of nine denture relining materials using contact angle measurements under air and water storage over time. MATERIAL AND METHODS. Nine denture relining materials were investigated in this study. Two heat-curing polymethyl-methacrylate(PMMA) denture base materials: Vertex RS, Lang, one self-curing polyethyl-methacrylate(PEMA) chairside reline resin: Rebase II, six silicone relining materials: Mucopren soft, Mucosoft, $Mollosil^{{R}}$ plus, Sofreliner Touch, GC $Reline^{TM}$ Ultrasoft, Silagum automix comfort were used in this experiment. Contact angles were measured using high-resolution drop shape analysis system(DSA 10-MK2, KRUESS, Germany) under three conditions(in air after setting, 1 hour water storage, and 24 hours water storage). Nine materials were classified into three groups according to material composition(Group 1: PMMA, Group 2: PEMA, Group 3: Silicone). Mean values of contact angles were compared using independent samples t-test and one-way ANOVA, followed by a Scheffe's post hoc analysis($\alpha$=0.01). RESULTS. Contact angles of materials tested after air and water storage increased in the following order: Group 1(PMMA), Group 2(PEMA), Group 3(Silicone). Heat-cured acrylic denture base resins had more wettability than silicone relining materials. Lang had the highest wettability after 24 hours of water storage. Silicone relining materials had lower wettability due to their hydrophobicity. Wettability of all denture relining materials, except Rebase II and $Mollosil^{{R}}$ plus, increased after 24 hours of water storage. CONCLUSIONS. Conventional heat-cured resin showed the highest wettability, therefore, it can be suggested that heat-cured acrylic resin is material of choice for denture relining materials.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.2
• /
• pp.79-89
• /
• 2008

The purpose of this study is to evaluate the differences among visual images under variations in shoulder length and puff volume of the puff sleeve blouse. The stimuli are 21 samples: three variations of shoulder length and seven variations of puff volume. The data has been obtained from 40 fashion design majors, where they had been analyzed through frequency, factor analysis, ANOVA, Scheffe's test and MCA method. The results of the study are as the following: As a result, through factor analysis of the visual images according to the variation of shoulder point and puff volume, the following four factors had been identified. Factor 1 is the brightness from evaluation terms such as childish-precocious, cute-mature, bright-genteel, soft-hard, enlarged-reduced, particular-ordinary, interesting- uninteresting, etc. Factor 2 is the attractiveness from evaluation terms such as refine-rustic, stylish-dull, attractive-unattractive, modern-classic, urban-rural, cool-gloomy, spacious-tight. etc. Factor 3 is the comfortness from evaluation terms such as comfort-discomfort, intense-indistinct, etc. Factor 4 is the elegance from evaluation terms such as elegance-shallowness, womanish-manly, etc. These four factors were 66.7% of the total variables. Of the total variables, the first factor had been evaluated as brightness in 26.2%, attractive in 21.0%, comfortness in 11.1%, and elegance in 8.4%. From this study, the more puff volume and shorter shoulder length, the puff volume wrapped the shoulder naturally, thus making the shoulder look narrow, and giving a cute and bright image. However, by having less puff volume and excessively short shoulder length, the puff volume did not naturally wrap the shoulder, which gave an unnatural and unattractive feel.

• The korean journal of orthodontics
• /
• v.51 no.2
• /
• pp.115-125
• /
• 2021

Objective: To evaluate the reasons influencing the preferences for a certain type of orthodontic appliance over another among prospective patients (PP) and orthodontists. Methods: A total of 49 PP and 51 orthodontists were asked about their preferences for the following appliances: clear aligners (CA), lingual metallic brackets (LMB), polycrystalline and monocrystalline ceramic brackets, and buccal metallic brackets (BMB). The participants rated the importance of 17 potential reasons that would explain their choices. The reasons that contributed most to these preferences were identified. Non-parametric tests (Fisher's exact, χ2 and Mann-Whitney tests) and multivariate analyses (regression and discriminant analysis) were used to assess the data (α = 0.05). Results: CA and BMB were the most chosen appliances by PP and orthodontists, respectively. LMB was the most rejected option among both groups of participants (p < 0.001). Rates of the importance of pain/discomfort, smile esthetics, finishing details, and feeding/speech impairment showed the highest differences between PP and orthodontists (p < 0.0005). Discriminant analyses showed that individuals who considered treatment time and smile esthetics as more important were more likely to prefer CA, while those who prioritized finishing details and cost were more likely to choose BMB (p < 0.05). Conclusions: Reasons related to comfort and quality of life during use were considered as more important by PP, while those related to the results and clinical performance of the appliances were considered as more relevant by orthodontists.

• The korean journal of orthodontics
• /
• v.52 no.4
• /
• pp.268-277
• /
• 2022

Objective: Poor experience with Invisalign treatment affects patient compliance and, thus, treatment outcome. Knowing the potential discomfort level in advance can help orthodontists better prepare the patient to overcome the difficult stage. This study aimed to construct artificial neural networks (ANNs) to predict patient experience in the early stages of Invisalign treatment. Methods: In total, 196 patients were enrolled. Data collection included questionnaires on pain, anxiety, and quality of life (QoL). A four-layer fully connected multilayer perception with three backpropagations was constructed to predict patient experience of the treatment. The input data comprised 17 clinical features. The partial derivative method was used to calculate the relative contributions of each input in the ANNs. Results: The predictive success rates for pain, anxiety, and QoL were 87.7%, 93.4%, and 92.4%, respectively. ANNs for predicting pain, anxiety, and QoL yielded areas under the curve of 0.963, 0.992, and 0.982, respectively. The number of teeth with lingual attachments was the most important factor affecting the outcome of negative experience, followed by the number of lingual buttons and upper incisors with attachments. Conclusions: The constructed ANNs in this preliminary study show good accuracy in predicting patient experience (i.e., pain, anxiety, and QoL) of Invisalign treatment. Artificial intelligence system developed for predicting patient comfort has potential for clinical application to enhance patient compliance.

• Korea Science and Art Forum
• /
• v.34
• /
• pp.251-262
• /
• 2018

The purpose of this study is to understand how wearable computing devices are designed and how to design them in a technology based wearable device design research. Research is premised on the consideration of producers and consumers. There is wearable computer of eyeglasses, watches, clothes, and so on. The user can always wear these products comfort and use as part of the body without any sense of discomfort, and the goal is to supplement or double the ability of the human being. It should be easy to use them convenient, wear comfortable, safe and sociable at any time. For the satisfaction these conditions, the wearable computing devices have several factors. There are technical performances, visual aesthetics, Human body system and devices communication and safety. Furthermore, these factors have to match to operating system, real-time operating system and applied software. To comprehend wearable computing devices should be offered the design of the both software and hardware designed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.5
• /
• pp.839-852
• /
• 2023

This study examined personal protective clothing, specifically the D (M, L, XL) and C (L, XL, 2XL) levels with high sales rates. The goal was to collect essential data for developing Korean personal protective clothing. There were eight and twelve patterns for the D-level and C-level, respectively. While the pattern dimensions were similar, the chest and waist circumferences (relaxed) were larger in the C-level, and the waist (extended), hip, upper arm circumference, and total lengths were larger in the D-level. The D-level wear sensation worked well for average-sized Koreans in their twenties, but the C-level caused discomfort in multiple areas, such as the face, arms, armpits, hips, crotch, thighs, and knee during movement. Consequently, this region required pattern adjustments and resetting for improved comfort. The grading rules were 10 cm in the chest, waist, and hip circumference, regardless of the level, with slight differences in other parts depending on the levels. Thus, manufacturers should establish new grading rules to suit the Korean body shape.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.24 no.4
• /
• pp.245-264
• /
• 2024

Computer-controlled local anesthesia delivery (CCLAD) is an innovative electronic injection device that represents a cutting-edge approach to dental anesthesia. This system is promising for painless anesthesia using controlled anesthetic injections. This review aimed to compare the discomfort experienced by patients during local anesthesia using a traditional syringe and the CCLAD system and evaluate the potential of the CCLAD system as a painless dental anesthesia solution. The inclusion criteria for this study were based on the recommendations of the Preferred Reporting Items for Systematic Reviews and Meta-Analysis guidelines. The study population, including children and adults, underwent dental anesthesia using the CCLAD system, ensuring a comprehensive and representative sample that instills confidence in the validity of the results. Fourteen clinical trials were included in the analysis after they fulfilled the eligibility criteria. We found that using computer-assisted anesthetic equipment not only led to a significantly lower pain perception score, but also had a profound positive impact on patient behavior. Patients using the CCLAD device exhibited more cooperative and helpful conduct, indicating the system's effectiveness in improving patient comfort and experience and reassuring the audience about its positive impact. In conclusion, using a computer-assisted anesthetic device such as the CCLAD system significantly reduced pain perception scores and improved patient behavior, making them more cooperative and helpful. These findings offer hope for pediatric dentistry and apprehensive adult patients, suggesting a more comfortable and less daunting dental experience with the CCLAD system.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.1
• /
• pp.105-116
• /
• 2010

Purpose: To analyze and compare differences between single vision lenses and functional progressive addition lenses and improvement to binocular visual function wearing functional lenses for pre-presbyopes altered their single vision lenses to functional progressive addition lenses with low addition. Methods: Healthy 32 subjects aged 24.03${\pm}$1.87 (male 23, female 9) who were recruited from university students wore functional progressive addition lenses (EYE-T, Chemilens Co., Korea, ADD 0.750) for 2 months. Objective refraction, corrected visual acuity at distance and near, near point of convergence, near point of accommodation, accommodative facility, phoria at distance and near were measured. And subjective satisfaction was investigated by using a questionnaire designed to fatigue, comfort, discomfort, overall satisfaction and preference. Results: Functional progressive addition lenses were better than single vision lenses at near point of convergence and accommodation, accommodative facility. Exo phoria measured at distance with single vision and functional progressive addition lenses. Exo phoria measured at near with functional progressive addition lenses was higher than that with single vision lenses. As a survey, the satisfaction was increased in questions related near work. However, single vision lenses were preferred in distance test of overall satisfaction, easy 10 adapt, lime to adapt. A survey showed thai preference of functional progressive addition lenses were increased 75.00% to 81.26% for near work, 50.00% to 65.63% for visual fatigue, 47.75% to 50.00% for visual comfort and 31.25% to 46.88% for overall comfort. Conclusions: Comparing between single vision lenses and functional progressive addition lenses, binocular visual function related near work, subjective satisfaction and preference was improved after wearing functional progressive addition lenses. This study suggested that functional progressive addition lenses were useful for long time near work.