• Current Photovoltaic Research
• /
• 제11권2호
• /
• pp.49-53
• /
• 2023

Expanding the supply of BIPV is crucial to strengthening the competitiveness of the photovoltaic industry and achieving Nationally Determined Contributions through the zero-energy building mandatory policy. BIPV is a technology that integrates into the building envelope to generate electricity and provide functions as a building material. It is suitable for domestic environments with many high-rise buildings due to the narrow land area and urbanization. To expand the supply of BIPV, economics, safety, and aesthetics must be ensured. In this study, a color BIPV module with a color PET film applied as a front material was manufactured for aesthetic and economic feasibility. The relationship between power output and transmittance according to color was analyzed. By analyzing the power output of the module and the transmittance of the film, the wavelength band (transmittance reduction band) that has the greatest effect on efficiency was analyzed regarding the color of the film. The red film showed the narrowest transmittance reduction band and the lowest degree of decrease in transmittance, making it ideal for minimizing the efficiency decrease rate compared to existing ones.

• 반도체디스플레이기술학회지
• /
• 제16권4호
• /
• pp.11-15
• /
• 2017

Red phosphors, $Sr_2Si_5N_8:Eu^{2+}$, were synthesized as a single-phase crystal structure by optimizing carbon and $Eu^{2+}$ contents in a carbothermal reduction nitridation method. With increasing $Eu^{2+}$ contents, the photoluminescence spectra were red-shifted from 600 nm peak for 1 mol% for to 700 nm for 7 mol%. It was suggested that this red shift is attributed to the energy transfer from one low-energy sited $Eu^{2+}$ (1) to other high-energy sited $Eu^{2+}$ (2). Finally, the best red sample (620 nm emission peak and 80 nm half width for 3 mole% of $Eu^{2+}$) was packaged on a Blue LED together with two additional green and yellow phosphors, the fabricated White LED showed a high color-rendering index of 90 and white color coordinates of x= 0.321 and y = 0.305.

• 전자공학회논문지CI
• /
• 제41권4호
• /
• pp.59-66
• /
• 2004

본 논문은 정적 분석을 하기 위해서 SG(String Graph)를 정의하고 ASG(Alive String Graph)를 정의한다. String의 사활의 판단을 위해 돌이 포함되지 않은 상태와 돌이 포함된 상태로 나누어 Rule을 적용한다. 돌이 포함되지 않은 상태에서 SR(String Reduction), ER(Empty Reduction), ET(Edge Transform), 그리고 CG(Circular Graph) Rule을 정의한다. 돌이 포함되어진 상태에서 DESR(Dead Enemy Strings Reduction)과 SCSR(Same Color String Reduction) Rule을 정의한다. 이러한 Rule을 사용하여 SG(String Graph)가 ASG(Alive String Graph)인지를 평가한다. 그리고 관절점의 개수에 따라 사활을 판단하기 위해 APC(Articulation Point Check)를 사용하였다. 우리의 방법에 대한 성능은 Computer Go Test Collection의 IGS_31_counted 문제 집합에 대해 실험했다. 이 Test set은 11,191 Points와 1,123 Strings을 가진다. 우리는 실험 결과에서 Points에 대해 92.5% 정확성과 Strings에 대해 95.7%의 정확성을 얻었다.

• 천문학회지
• /
• 제30권1호
• /
• pp.1-11
• /
• 1997

Near infrared JHK magnitudes are presented for two hundred two high proper motion stars. We have observed high proper motion stars in the near-infrared bands(JHK) using the COB detector on the Kitt Peak 1.3m, 2.1m and 4m telescopes. The observations and data reduction procedures are described. The infrared color magnitude diagram and color-color diagrams for the program stars are presented.

• Journal of Information Display
• /
• 제8권3호
• /
• pp.17-21
• /
• 2007

We introduce a new electrode structure for the patterned vertical alignment (PVA) mode, which has a lower color-shift at large viewing angle than the one-domain VA mode. By manipulating the period of electrode structure, we can make more multi-domains and use the existing fabrication processes without having to use additional materials.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2015년도 하계학술대회
• /
• pp.486-488
• /
• 2015

FSC(Field Sequential Color) LCD has high efficiency, high brightness and color saturation due to 3 times aperture larger than conventional LCD. However it is well known that color break-up (CBU) and color interference are hot issue need to be solved. We propose a novel sequential driving method with edge-lit light guide composed of $16{\times}15$ blocks to reduce CBU and color interference. The experimental results show not only suppression of CBU but also the side effects are minimized.

• 한국정보통신학회논문지
• /
• 제8권7호
• /
• pp.1464-1468
• /
• 2004

본 논문은 그레이 영상을 컬러영상으로 변환하고 컬러농도를 변환하여 출력영상을 향상시킨 연구이다. RGB 컬러성분을 추출하기 위한 의사컬러링은 2D고속웨이브릿 변환(FWT)에 의한 필터뱅크 재배열을 적용하고 후처리에서 각각의 모노컬러는 노이즈제거와 영상향상을 위해 이산 컬러농도변환(CIT)을 적용한다. 실험결과 출력영상은 일반 웨이블릿 변환 적용보다 PSNR 30dB이상 개선된다.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1624-1632
• /
• 1996

Wavelet transform is widely used for high compression ratio image compression. It requeires a large memory when it is implemented by a hardware. Therefore, it is efficient to divide the entire image into blocks. Because the wavelet transform for divided blocks causes losses, pixels of the adjacent blocks are used. In the case of color image compression, the image is decomposed into brightness and color components, and then color components are downsampled. When the wavelet transform is performed by using pixels of adjacentblocks, the number of necessary pixels are doubled due to downsampling of color components. In this paper, we propose an efficient block wavelet transform using variablefilter length for brightness and color components. By using the proposed method, the number of pixels of adjacent blocks is optimized. We show the degradation of image quality due to the reduction of filter length for color components is negligible through simulations.

• 한국물환경학회지
• /
• 제18권3호
• /
• pp.245-251
• /
• 2002

Reactive dyes waste water, a toxic and refractory pollutant, was treated by an electrochemical method using $Ti/IrO_2$ as anode and Stainless Steel 316 as cathode. In this technique, sodium chloride as an electrolyte was added. A number of experiments were run in a batch system. Artificial samples (reactive blue 19, red 195, yellow 145) were used. Operation parameters, such as supporting electrolyte concentration, current density, pH and sample concentration have been investigated for their influences on COD and color removal efficiencies during electrolysis. After 5 and 90 minites of eletrolysis, color was reduced by 51.5% and 98.9% respectively. Under the condition of current density $10A/dm^2$, NaCl concentration 12mg/l and pH 3, 62.9% of $COD_{Cr}$ was removed after electrolysis for 90 minites. The optimum condition of color removal and COD reduction in this work was found to be the following : pH 3, sodium chloride concentration 20g/l, current density $10A/dm^2$. As a result, we confirmed to be effective to color removal and reduction of refractory organic material.

• Archives of Plastic Surgery
• /
• 제42권1호
• /
• pp.52-58
• /
• 2015

Background The erbium:yttrium scandium gallium garnet (Er:YSGG) laser differs from other laser techniques by having a faster and higher cure rate. Since the Er:YSGG laser causes an appropriate proportion of ablation and coagulation, it has advantages over the conventional carbon dioxide ($CO_2$) laser and the erbium-doped yttrium aluminum garnet (Er:YAG) laser, including heating tendencies and explosive vaporization. This research was conducted to explore the effects and safety of the Er:YSGG laser. Methods Twenty patients participated in the pilot study of a resurfacing system using a 2,790-nm Er:YSGG laser. All patients received facial treatment by the 2,790-nm Er:YSGG laser system (Cutera) twice with a 4-week interval. Wrinkle reduction, reduction in pigment inhomogeneity, and improvement in tone and texture were measured. Results Study subjects included 15 women and five men. Re-epithelization occurred in all subjects 3 to 4 days after treatment, and wrinkle reduction, reduction in pigment inhomogeneity, and improvement in tone and texture within 6 months of treatment. Conclusions The 2,790-nm YSGG laser technique had fewer complications and was effective in the improvement of scars, pores, wrinkles, and skin tone and color with one or two treatments. We expect this method to be effective for people with acne scars, pore scars, deep wrinkles, and uneven skin texture and color.