• 한국멀티미디어학회논문지
• /
• 제12권8호
• /
• pp.1128-1141
• /
• 2009

게임 산업이 성장하면서 게임 그래픽 분야는 가장 빠르게 발전하고 있으며 지금은 실제 사진과 컴퓨터 그래픽을 구분하기 힘든 정도로 그래픽 기술은 양적으로나 질적으로 성장했다. 그러나 이러한 발전에도 불구하고 새롭게 출시되는 게임에 등장하는 캐릭터는 정서를 표현하지 않거나 소극적으로 표현하고 있다. 일반적으로 사람들은 얼굴의 표정이나 얼굴의 색(안색)에서 많은 정서 정보를 인지하는 것은 누구나 아는 사실이다. 그러므로 컴퓨터의 게임 환경에서 등장하는 캐릭터에게도 얼굴의 색의 변화를 통하여 유저에게 게임의 사실적인 느낌을 줄 수 있다. 본 논문에서는 기존의 맥박과 피부 온도만을 이용한 방법과는 다른 인간의 정서 이론을 기반한 정서 모형과 애니메이션의 정서표현 색 그리고 성격이론을 기반한 정서의 반응 속도를 결합하여 게임 캐릭터의 얼굴의 색을 동적으로 변화시켜 정서를 표현할 수 있는 얼굴 색 적응 기술 (Facial Color Adaptive Technique: FCAT)를 제안한다. 실제 얼굴 색 적응 기술을 이용하여 만든 얼굴색 모형(Facial Color Model : FCM)과 애니메이션 콘텐츠의 정서표현을 비교한 결과 정서 표현 색상과 변화율이 애니메이션과 유사하게 시뮬레이션 되었다. 또한 2차원 이미지뿐만 아니라 3차원 이미지에도 적용이 가능함을 확인 하였다.

• 한국식품과학회지
• /
• 제7권1호
• /
• pp.37-42
• /
• 1975

본실험(本實驗) 에서는 여러 진행단계(進行段階)에서 있는 Maillard 형(形) 갈색화(褐色化) 반응물(反應物)에서 얻어지는 absolute 및 90% ethanol 추출물(抽出物)들의 색깔의 강도(强度)와 갈색화(褐色化) 반응시간(反應時間)과의 관계(關係) 이상(以上)의 추출물(抽出物)들의 식용유지(食用油脂)에 대한 항산화효과(抗酸化效果)의 비교검토(比較檢討), 그리고 以上의 추출물(抽出物)들의 색깔의 강도(强度)와 이들의 항산화효과(抗酸化效果)사이의 관계(關係)들을 규명(糾明)코저 하였다. 그 결과(結果)는 다음과 같다. 1. 갈색화(褐色化) 반응액(反應液)의 absolute ethanol 추출물(抽出物)들의 색깔은 갈색화(褐色化) 반응시간(反應時間)에 관계(關係)없이, 즉 갈색화(褐色化) 반응액자체(反應液自體)의 갈색화(褐色化)에 관계(關係)없이 거의 무색(無色)에 가까웠으며, 한편 90% ethanol 추출물(抽出物)은 반응시간(反應時間)에 따라 증가(增加)하였으며, 그 색깔의 강도(强度)는 반응시간(反應時間)에 거의 비례(比例)하였다. 2. Absolute 및 90% ethanol 추출물(抽出物)들은 다같이 식용대두유(食用大豆油)의 자동산화(自動酸化)에 대해서 상당(相當)한 항산화효과(抗酸化效果)를 보여 주었다. 한편, 두 형태(形態)의 추출물(抽出物)들에 있어서는 absolute ethanol 추출물(抽出物)들이 90% ethanol 추출물(抽出物)들보다 전체적(全體的)으로 훨씬 강(强)한 항산화효과(抗酸化效果)를 보여주었다. 3. 갈색색소(褐色色素)의 함량(含量)이 분명(分明)히 적은 absolute ethyl alcohol 추출물(抽出物)들이 다량(多量)의 갈색색소(褐色色素)를 함유하고 있는 90% ethanol 추출물(抽出物)들보다 훨씬 더 강(强)한 항산화력(抗酸化力)을 표시(表示)한 사실(事實), 그리고 90% ethanol 추출물(抽出物)들의 항산화효과(抗酸化效果)가 그 색깔의 강도(强度)의 증가(增加)에 따라 증가(增加)하지 않았던 사실(事實)들은 적어도 본실험(本實驗)에서는 반응(反應)중에 형성(形成)된 갈색색소(褐色色素)들이 이상(以上)의 추출물(抽出物)들의 항산화작용(抗酸化作用)에 크게 관여(關與)하지 않고 있음을 시사하고 있는듯 하다.

• 한국결정성장학회지
• /
• 제26권5호
• /
• pp.181-187
• /
• 2016

본 연구에서는 납이나 크롬이 함유되지 않은 친환경적인 물질의 새로운 주황 무기 안료를 개발하고자 하였다. 고상반응법을 이용하여 LPG와 Air를 이용한 환원분위기에서 $TiO_2-SnO-ZnO$계 주황색 무기 안료를 합성하였다. 합성 된 안료들의 특성을 분석하기 위하여 표색계 값인 $L^*a^*b^*$ 값을 측정 후, XRD를 이용하여 결정 상을 분석하였고, SEM을 이용하여 미세구조 관찰하였으며, XPS를 이용하여 원소들의 산화가 상태를 분석하였다. 고상 반응법으로 합성 후 열처리한 $TiO_2-SnO-ZnO$ 안료는 yellow에서 orange-red 사이의 색을 가진다. $TiO_2-SnO-ZnO$ 안료의 결정상 분석 결과, 5가지의 결정상이 혼재하는 것을 볼 수 있는데, $SnO_2$가 cubic과 tetragonal 구조 중 어떤 결정 구조를 가지는지가 발색의 가장 중요한 요인으로 작용하는 것을 확인하였다. XPS를 이용하여 원소들의 산화가 상태를 분석한 결과, $Sn^{4+}$의 비율이 높을수록 안료가 rYR에 가까운 색을 가지는 것을 확인할 수 있다.

• 대한두개안면성형외과학회지
• /
• 제11권1호
• /
• pp.13-18
• /
• 2010

Purpose: Nasal defect can be caused by excision of tumor, trauma, inflammation from foreign body reaction. Nose is located in the middle of face and protruded, reconstruction should be done in harmony with size, shape, color, and textures. We report various methods of nasal reconstruction using local flaps. Methods: From March 1998 to July 2008, 36 patients were operated to reconstruct the nasal defects. Causes of the nasal defects were tumor (18 cases), trauma (11 cases), inflammation from foreign body reaction (5 cases) and congenital malformation (2 cases). The sites of the defects were ala (22 cases), nasal tip (8 cases) and dorsum (6 cases). The thickness of the defects was skin only (5 cases), dermis and cartilagenous layer (7 cases) and full-thickness (24 cases). According to the sites and thickness of the defects, various local flaps were used. Most of alar defects were covered by nasolabial flaps or bilobed flaps and the majority of dorsal and tip defects were covered by paramedian forehead flaps. Small defects below $0.25 cm^2$ were covered with composite graft or full-thickness skin graft. Results: The follow-up period was 14 months. Partial flap necrosis was observed in a case, and one case of infection was reported, it was improved by wound revision and antibiotics. Nasal reconstruction with various local flaps could provide satisfactory results in terms of color and texture match. Conclusion: The important factors of nasal reconstruction are the shape of reconstructed nose, color, and texture. Nasolabial flap is appropriate method for alar or columellar reconstruction and nasolabial island flap is suitable for tip defect. The defect located lateral wall could be reconstructed with bilobed flap for natural color and texture. Skin graft should be considered when the defect could not afford to be covered by adjacent local flap. And entire nasal defect or large defect could be reconstructed by paramedian forehead flap.

• 한국생활과학회지
• /
• 제19권4호
• /
• pp.699-707
• /
• 2010

Catechu is widely used as in natural dyeing as well as in various medicines and tannage. This study investigated the dyeing properties and functionality of Catechu through a series of dyeing experiments using cotton fabric. It was shown that the absorbance of Catechu solution has two peaks at 220nm and 280nm. Thus, it can be concluded that the color constituent of Catechu is a catechol tannin and color tone is YR. The dyeability of Catechu increases as the concentration of the dye is increased. Its variation was shown to be similar to the isothermal absorption curve of the Freundlich. As dyeing time was increases, the dyeability did not change significantly after the 30 minute mark was passed. At high temperatures the dyeability was shown to increase. As the dyeing temperature was increased the color of dyeing fabrics changes from Y and YR to R. Experiments with pre-mordanting method showed that various colors can be obtained using Catechu. Cotton is effective in using K, Cu, Fe mordants, and the dyeability was shown to be improved with low pH. Both washing fastness and light fastness were shown to be low. However, the fabric color gradually changed to red was due to mailard reaction of catechol tannin causing by repeated washing and sunlight. The ultraviolet-cut ability was improved for cotton fabric dyed with Catechu. Also, dyed fabric with Catechu showed very good antimicrobial abilities at 99.9%.

• 한국수산과학회지
• /
• 제9권2호
• /
• pp.111-119
• /
• 1976

Discoloration of canned boiled oyster namely greening, yellowing and browning often occur separately or associatively in the storage of the product. Greening is mainly caused by the appearance of chlorophyll and its derivatives on the surface around the digestive diverticula of the oyster and yellowing by dispersion of carotenoid. Browning reactions by sugar amino condensation or enzymatic action, tyrosinase, also cause an undesirable color development. In this paper, the stability and the changes in distributional or partitional ratio of chlorophyll and carotenoid pigment of meat vs viscera in raw and canned oyster during six month storage in order to measure the dispersion rate of both pigments between meat and viscera, and to evaluate the feasibility of discoloration of oyster meat. The development of brownish pigment and the toss of free tyrosine in oyster were also determined to compare the readiness of color development. In addition the influence of processing and storage conditions to the dispersion rate and the tendency of discoloration, and finally the effect of inhibitor were discussed. The results showed that greening or yellowing was initiated by the dispersion of chlorophyll or carotenoids from viscera to the meat of oyster, and the dispersion rate of carotenoid was much higher than the chlorophyll's, so that, yellowing appeared a leading reaction of discoloration. The dispersion rate was obviously fastened by raising the temperature in the process of sterilization and storage. Consequently, the low temperature storage could largely retard the occurance of yellowing or greening of oyster meat. The pH control of canned oyster did not seem to affect the dispersion of pigment but significantly did on the stability of the piqments. Browning by the reaction of sugar-amino condensation and enzymatic oxidation of tyrosine was positively detected in canned oyster meat. The development of brownish color was influenced rather by the storage temperature than the heating process. Addition of sodium sulfite in can or treating the boiled oyster with sulfite solution prior to filling seemed possibly inhibit the color development particularly in cold-storaged oyster meat.

• 한국재료학회지
• /
• 제23권12호
• /
• pp.695-701
• /
• 2013

To understand how reactivity between reinforcing nanoparticles and aqueous solution affects electrodeposited Cu thin films, two types of commercialized cerium oxide (ceria, $CeO_2$) nanoparticles were used with copper sulfate electrolyte to form in-situ nanocomposite films. During this process, we observed variation in colors and pH of the electrolyte depending on the manufacturer. Ceria aqueous solution and nickel sulfate ($NiSO_4$) aqueous solutions were also used for comparison. We checked several parameters which could be key factors contributing to the changes, such as the oxidation number of Cu, chemical impurities of ceria nanoparticles, and so on. Oxidation number was checked by salt formation by chemical reaction between $CuSO_4$ solution and sodium hydroxide (NaOH) solution. We observed that the color changed when $H_2SO_4$ was added to the $CuSO_4$ solution. The same effect was obtained when $H_2SO_4$ was mixed with ceria solution; the color of ceria solution changed from white to yellow. However, the color of $NiSO_4$ solution did not show any significant changes. We did observe slight changes in the pH of the solutions in this study. We did not obtain firm evidence to explain the changes observed in this study, but changes in the color of the electrolyte might be caused by interaction of Cu ion and the by-product of ceria. The mechanical properties of the films were examined by nanoindentation, and reaction between ceria and electrolyte presumably affect the mechanical properties of electrodeposited copper films. We also examined their crystal structures and optical properties by X-ray diffraction (XRD) and UV-Vis spectroscopy.

• 공업화학
• /
• 제28권1호
• /
• pp.95-100
• /
• 2017

본 연구에서는 Pigment Red 57:1의 다양한 합성 방법에 따른 입자 거동 및 그의 따른 색상, 점도, 및 분광학적 특성 등을 분석하기 위하여, 합성 시간, pH, 유도체 함량 및 결정화 온도 등의 변수를 이용하여 시료를 합성한 후 그 분산액을 제조하였으며, 그에 따른 특성을 비교 분석하였다. 시료들의 특성은 푸리에 적외선 분광기, UV-Vis 분광기, 입도 분석기, 색차계, X선 회절 분석계 등을 이용하여 비교 분석하였다. 그 결과 합성 조건 조절을 통하여 안료 입자의 크기를 다양하게 조절하는 것이 가능하였다.

• Applied Biological Chemistry
• /
• 제29권2호
• /
• pp.190-197
• /
• 1986

탈지분유(脫脂粉乳)에서 마이야르 반응(反應)(Maillard reaction)의 속도(速度)를 간단히, 그리고 효과적으로 측정(測定)하기 위(爲)한 지표(指標)로서 포장상위공간내(包裝上位空間內)의 $CO_2$함량(含量)을 이용(利用)하였고,$CO_2$량(量 )과 갈변색소형성(褐變色素形成) 사이의 상관관계(相關關係)를 조사(調査)하였다. 갈변색소(褐變色素)와 $CO_2$함량(含量)사이에는 높은 상관관계(相關關係)를 나타냈으며, 시료(試料)의 상위공간내(上位空間內)의 $CO_2$량(量)을 측정(測定)함으로 마이야르 반응(反應)을 예측(豫測)할 수 있는 빠르고 간단한 방법(方法)이 될 수 있었다. 휘발성분(揮發成分)은 저장기간(貯藏期間)이 증가(增加)할수록 증가(增加)하였고, 산소함량(酸素含量)과는 반비례(反比例)하였다. 리신(lysine)은 반응(反應)의 촉매(觸媒)로 글루코스보다 더 효과적이었으며, 시료(試料)를 $55^{\circ}C$와 $65^{\circ}C$에 넣어 저장(貯藏)할 때 반응(反應)을 촉진(促進)시켜 시험기간(試驗期間)을 단축(短縮)시켰으며 $75^{\circ}C$에서는 빨리 변질(變質)되었다.

• 한국염색가공학회지
• /
• 제7권3호
• /
• pp.22-30
• /
• 1995

The effects of agents in padding liquor on the fixation of vinylsulfonyl reactive dye of ground color and on the resist-dischargeability in resist-discharge printing of cotton fabrics with reactive/reactive dyes were investigated. Alkalis, such as sodium bicarbonate, sodium carbonate, sodium acetate and trichloro sodium acetate, were used to fix the dye for ground color on cotton fabrics. Sodium bicarbonate and sodium carbonate showed a good fixation of the dye for ground color, but they were ineffective to the white and the colored resistdsichargeabilities, which were caused by the fast fixation of the dye for ground color before its reaction with resist agent in printing paste. Therefore these are not suitable for the agent to fix the dyes for ground color because they deteriorate the resist-dischargeability. In case of sodium acetate, as the fixation yield of the dye for ground color was remarkably low. and the white resistdischargeability was not good, it had better not be used for the agent to fix the dye for ground color. However, the addition of sodium trichloroacetate to padding liquor gave a very good fixation yield of ground color, and showed an excellent resist-dischargeability. The effects of acetic acid in padding liquor on the fixation of the dye for ground color and on the resist-dischargeability were studied in case of immediate printing of resist-discharge pastes after padding and drying and in cases of printing after 1∼3 day-storage of padded goods. By the addition of 2% of 48% acetic acid aqueous solution to padding liquor, the white and the colored resist-dischargeabilities were improved and the fixation of the dye for ground color was good without any troubles. Especially, when the padded goods were stored for 2 or 3 days and printed with resist-discharge printing pastes, its addition was very effective on the resist-dischargeability.