• Applied Biological Chemistry
• /
• v.22 no.1
• /
• pp.18-23
• /
• 1979

To prepare the objective quality control index of red pepper powder, the relationships among the color appearance, capsanthin red pigment and the contamination of coliform bacteria were studied and summarized as followings; 1. Visual method by human eyes was inadequate to grade the quality of red pepper powder, because of the different personal color evaluation. 2. Grading upon capsanthin contents are well agreed with the color appearance of the red pepper powder. Therefore, color appearance can be correlated with the capsanthin content. 3. Color appearance of the red pepper can be numerically expressed with Hunter-value a/b; Capsanthin $content(mg/g-red pepper)=0.257{\times}10^{0.703}(a/b)$ and it can be used as an index of the quality control of red pepper powder. 4. There was no distinct correlation between the comtamination of coliform bacteria and the color value.

• Food Science and Preservation
• /
• v.24 no.3
• /
• pp.361-366
• /
• 2017

This study investigated quality change of ginseng depending on far-infrared (FIR) drying methods. The ginseng was cut into 2 mm slices and measured moisture content (MC), color, total polyphenol content (TPC), total flavonoid content (TFC) and DPPH radical scavenging activity (DPPH). The color values (L, a, and b) were decreased after far-infrared (FIR) drying. As increase in drying time, color was changed. Considering quality parameters including MC, TPC, TFC, and DPPH, the optimum condition for drying was set at $65^{\circ}C$ for 60 min. Furthermore, we compared color and functional compounds depending on drying process including FIR, freeze-, vacuum, and hot-air drying. The color values of ginseng were decreased when dried using vacuum and hot-air. While the color values of ginseng were increased after freeze drying. Comparison with another drying method, FIR drying presented the highest color difference. FIR and vacuum-dried ginseng indicate higher contents of TPC and TFC than freeze- and hot air-dried ginseng. And hot-air-dried ginseng present the highest DPPH when compared to another drying methods. On the other hand, freeze dried ginseng show the lowest TPC, TFC, and DPPH.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.7
• /
• pp.1049-1054
• /
• 2003

A group of Hanwoo (Korean cattle) steers (n=14,386) was sampled from a commercial abattoir located in Seoul over one year period (spring, summer, autumn and winter) and their carcass traits were collected. Carcass traits assessed by an official meat grader comprised degree of marbling, meat color, fat color, texture and maturity for quality grade, and back fat thickness, ribeye area and carcass weight for yield grade. A heavier carcass with a higher marbling score, more red meat color and white fat color received better quality grade (p<0.05). Regression analysis showed that the marbling score was the strongest attribute (partial $R^2=0.88$) for quality grade. Lighter carcasses with a thinner back fat and larger ribeye area received higher yield grade score. The back fat thickness was the most negative determinant of yield grade (Partial $R^2=-0.66$). The slaughter season had a little effect on quality and yield grades. As slaughter weight increased, back fat thickness and ribeye area increased linearly, whereas marbling score reached its asymptotic level at approximately 570 kg. As a consequence, quality grade showed a considerable improvement up to 570 kg, but increases in slaughter weight afterward showed a little benefit on quality grade. There was a clear curvilinear relationship between slaughter weight and yield grade in that the yield grade reached its highest point at approximately 490 kg and decreased afterward. These results suggested that 570kg at the age of 24 months might be the economic slaughter weight for quality grade but 490 kg for yield grade.

• Food Science of Animal Resources
• /
• v.43 no.3
• /
• pp.531-539
• /
• 2023

The objective of this study was to determine the effects of quality grade (QG), and back-fat thickness on the carcass traits and meat quality properties of Hanwoo steers. Fifty carcasses were sorted into two QG (QG 1+ and 1) and three back-fat thickness (<10 mm, 10 to 19 mm and ≥19 mm) groups. After investigating the carcass traits (rib eye, back-fat thickness, weight, color, yield index, maturity, marbling score, and texture), the longissimus lumborum muscles from the carcass groups were collected and analyzed for meat quality (pH, color, cooking loss, and moisture), texture profiles [Warner-Bratzler shear force (WBSF), and tensile tests], and fatty acid. Results showed that marbling score (p<0.001), moisture (p<0.05) and tensile tests values (p<0.05) had a significant differences between QG1+ and QG1. No differences in pH, color traits, cooking loss and WBSF values occurred between the QG groups. Regarding the back-fat thickness effect, we observed that the carcass weight, yield index (p<0.001), yield grade (p<0.001) and marbling score (p<0.05) had a significant differences among the back-fat thickness groups. Regarding the meat quality, moisture content and WBSF values (p<0.01) among the back-fat thickness groups. The back-fat thickness did not affect the pH, color, cooking loss and tensile tests. The QG and back-fat thickness did not affect the fatty acids contents (p>0.05). It may be concluded that the carcass traits and meat quality were significantly affected the QG and back-fat thickness.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.146-151
• /
• 1997

Recntly many devics print electronic images in a variety of ways. But the reproduced color, gamut mappung method and expanded nonlinear quantization are proposed. The color gamut mapping uses saturation mapping of HSI color space. Dithering operation for printing uses expanded nonlinear quantization which considers overlapping phenomena of neighboring printing dots. So the printed image is similar to the image of monitor and can produce high quality image in the low bit color devices.

• Journal of the Korean Society of Food Culture
• /
• v.30 no.2
• /
• pp.206-212
• /
• 2015

The purpose of this study was to investigate the quality characteristics of cookies containing Ligularia fischeri powder (0, 1, 2, 3, 4%) substituted for flour. This study measured the density, pH, spread ratio, volume, color values, hardness, and sensory properties of cookies. The pH of cookie dough significantly decreased in response to addition of Ligularia fischeri powder (LFP) at all levels. The spread factor of cookies also significantly increased with higher LFP content. In addition, Hunter's color L, a, and b values significantly decreased with increasing LFP content. According to hardness measurement, substitution of 1~4% LFP resulted in increased hardness compared to the control. In the sensory evaluation, sensory scores for color, flavor, and overall acceptability were highest in 2% Ligularia fischeri powder cookies. Thus, our results suggest that the optimum amount of Ligularia fischeri powder added to cookies was 2%. These results suggest that Ligularia fischeri powder can be applied to cookies to achieve high quality and functionality.

• Korean Journal of Human Ecology
• /
• v.20 no.2
• /
• pp.467-473
• /
• 2011

The principal objective of this study was to evaluate the quality characteristics of jelly prepared with five different levels(0, 0.5, 1.0, 1.5, and 2.0%) of black garlic concentrate(BG1-BG4). We conducted the pH, sugar content, Hunter's color value, mechanical characteristics, and a sensory evaluation analysis of black garlic jelly. The more black garlic concentrate increased, the more the sugar content of the black garlic jelly increased(p<0.05). In terms of color, lightness(L) and yellowness(b) decreased as the black garlic concentrate increased, while redness(a) increased. With regard to the mechanical properties of the black garlic jelly samples, the higher the score of hardness, gumminess, and chewiness significantly increased(p<0.05). In color, flavor, texture and overall quality, the score of jelly with 1.0% black garlic concentrate(BG2) increased most of the all.

• Journal of the Korean Institute of Educational Facilities
• /
• v.20 no.3
• /
• pp.29-39
• /
• 2013

This study addresses the evaluation on the satisfaction of school illumination quality by applying SERVPERF model after extracting factors affecting school illumination quality. Three types of illumination systems (fluorescence light, general LED light and high color rendition LED light) were tested by students who have used each illumination system. Three factors such as effectiveness, esthetic sense and function were developed for evaluation. Satisfaction evaluation was performed based on applied SERVPERF model by comparing perceived levels. The differences of perceived levels of satisfaction on the illumination systems were analyzed by ANOVA. The results said respondents satisfy only the high color rendition LED light regardless of three factors. Especially, students who experienced high color rendition LED light have strong intention to recommend that illumination system to other schools. They also express their desire to use that system at home. Interestingly, there is not much satisfaction difference between fluorescence light and general LED light.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.520-524
• /
• 2009

In compressed color images, colors are usually represented by luminance and chrominance (YCbCr) components. Considering characteristics of human vision system, chrominance (CbCr) components are generally represented more coarsely than luminance component. Aiming at possible recovery of chrominance components, we propose a model-based chrominance estimation algorithm where color images are modeled by a Markov random field (MRF). A simple MRF model is here used whose local conditional probability density function (pdf) for a color vector of a pixel is a Gaussian pdf depending on color vectors of its neighboring pixels. Chrominance components of a pixel are estimated by maximizing the conditional pdf given its luminance component and its neighboring color vectors. Experimental results show that the proposed chrominance estimation algorithm is effective for quality improvement of compressed color images such as JPEG and JPEG2000.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.245-260
• /
• 2015

The effect of salt milling process on the crystal size, morphology, and color characteristics of C.I. Pigment Red 57:1 was studied. The primitive morphology and color properties of the pigment after synthesis were studied in the former series work. The size and morphology of primary particles and the second aggregation features should be considered because they are very important to determine pigment quality. We compared the primary morphology of pigment particles before drying with the secondary aggregated morphology of pigment particles after drying and salt milling process. Morphological properties were investigated by particle size analysis, X-ray diffraction, and scanning electron microscopy and color measurement was carried out. Significant reduction in particle size as well as enhanced crystallite size after salt milling process was observed. This result might give a difference in color of the pigment, turning into brighter and more blue-toned red color. It was revealed that synthesis condition affect the morphology and color of the pigment even after milling. Increase in HCl concentration in the synthesis process enhanced crystal size and quality forming bluer-red pigments but an increase in $CaCl_2$ concentration resulted in more amorphous crystals forming darker-red pigments after salt milling.