• Computers and Concrete
• /
• v.5 no.2
• /
• pp.89-100
• /
• 2008

This research examines the engineering properties and color intensities of mortar containing different amounts of fly ash (0, 5, 10 and 20%) mixed at different water-to-binder ratios (w/b = 0.23, 0.47 and 0.59) and exposed at different temperatures (T = 25, 100, 200, 400, 600 and $800^{\circ}C$). Results show that there is greater mass loss on ignition with high w/b and higher temperatures. In addition, the color channel image analyzer (Windows software written in Delphi) is utilized to study the relationship between the curing temperature and intensity of three primary colors, red, green and blue (RGB), of the fly ash mortar specimens. The results show that the RGB intensities on the specimen surface increases from that at $25^{\circ}C$. The mortar specimen becomes white with increase in w/b but without the addition of fly ash. Moreover, for mortar specimens with greater content of fly ash, red on the specimen surface has the greatest increase in intensity at elevated temperature. Observation the variations in color on the specimen surface may help estimate the highest elevated temperatures that concrete structures can withstand.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.94-95
• /
• 2015

In this research is an examined the fundamental characteristics of color quantization of color mortar in according to the liquid carbon black. If the mortar mixed with liquid carbon black, and is excellent in color developing property as compared to existing powdered black pigment, compressive strength was excellent value in the range of less than 1%.

• Resources Recycling
• /
• v.19 no.6
• /
• pp.86-92
• /
• 2010

In the many kind of construct-material, the concrete which has the high-strength and a durability is sufficient to use with structure-material. but the color of concrete is very monotony, so generally concrete isn't used the out surface. although color concrete is a method of expressing surface, the combination of pigment and cement cause many physical problem such as efflorescence phenomenon, strength degradation and so on. In this study, It attempt to develop the black mortar using the industrial granulated blast furnace slag and to evaluate basic physical properties compare with general color concrete to solve the color concrete problem. The result of experiment showed that the flow dropped mixing of pigment. but flow increased in proportion to the mixing rate in occasion of mortar that mix granulated blast furnace sla and black mortar which was made granulated blast furnace slag has more visible black color than any mortar.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.101-106
• /
• 2009

We study on the segregation reduction effect of Self-Leveling Color Mortar by using variable composition set of plasticizer and thickener, Naphthalene, melamine and polycarbonate-based dispersants were employed as plasticizers for examining on fluidity of mortar mixtures. For enhancement of mortar stability without loss of it's fluidity, two types of thickener were used such as polysaccharide(PS) and hydroxyethylcellulose(HEC). As a result, the most effective mortar was composed by feeding 0.519% of polycarbonate-based dispersant with 0.002587% of PS and 0.155844% of HEC on amount of basic mortar.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.733-736
• /
• 2006

In the many kind of construct-material, the concrete which has the high-strength and a durability is sufficient to use with structure-material. But the color of concrete is very monotony so generally concrete isn't used the out surface. although color concrete is a method of expressing surface, the combination of pigment and cement cause many Physical problem such as efflorescence phenomenon, strength degradation and so on. In this study, It attempt to develop the black mortar using the industrial by-product and to evaluate basic physical properties compare with general color concrete to solve the color concrete problem. The result of experiment showed that Black NSC which was made by-product has more visible black color than any mortar.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.2
• /
• pp.111-117
• /
• 2013

Heavy oil fly ash (HOFA) is a byproduct generated by the burning of heavy fuel oil. Chemical analysis showed that HOFA is mainly composed of unburned carbon with a significant amount of heavy metals. Due to toxicity, management of this waste poses a challenge to the industry personal. The present study investigates the possible use of HOFA as a black pigment or admixture in cement mortar aiming to produce ornamental brick. In order to investigate the change of cement mortar strength when HOFA is added, the standard compressive strength test with 50 mm cubes was performed. The results showed that the addition of 2-5 % of HOFA in cement mortar does not affect its strength. The leaching behavior of trace elements within HOFA and HOFA mixed mortar were investigated through laboratory batch leaching experiments. The results confirmed that HOFA can be utilized as a black pigment in ornamental brick, which is environmentally safe and provides good balance between color and brick properties.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.190-191
• /
• 2013

In this research, the fundamental experiment for colour concrete(by using pigment) has been invested. Fundamental properties and dyeability for the colour mortar as the changing replacement ratio of pigment has been tested. For the conclusion, with the increasing ratio of pigment, the flow and compressive strength for the mortar has been decreased, For the dyeability, there's little difference when replacement ratio of dyestuff changed when the colour is red and yellow, but large difference when the blue pigment was used. Consider about the workability and strength of the mortar, the optimum pigment's replacement ratio is fixed as 2.5%.

• Computers and Concrete
• /
• v.8 no.5
• /
• pp.491-510
• /
• 2011

Before deciding if structures exposed to high temperature are to be repaired or demolished, their final state should be carefully examined. Destructive and non-destructive testing methods are generally applied for this purpose. Compressive strength and color change in mortars are observed as a result of the effects of high temperature. In this study, ordinary and pozzolan-added mortar samples were produced using different aggregates, and exposed to 100, 200, 300, 600, 900 and $1200^{\circ}C$. The samples were divided into two groups and cooled to room temperature in water and air separately. Compression tests were carried out on these samples, and the color change was evaluated by the Munsell Color System. The relationships between the change in compressive strength and color of mortars were determined by using a multi-layered feed-forward Neural Network model trained with the back-propagation algorithm. The results showed that providing accurate estimates of compressive strength by using the color components and ultrasonic pulse velocity design parameters were possible using the approach adopted in this study.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.146-152
• /
• 2018

In the construction sector, new demands for aesthetics are increasing due to structural stability and improvement of living standard and consciousness level. On the other hand, Red Mud sludge is generated from aluminum hydroxide extraction process from Bauxite. Red mud sludge contains about 20% of $Fe_2O_3$ and represents a natural reddish brown. It is highly applicable to the construction industry. In this paper, red mud sludge with a water content of 50%, which is a by - product of the industry, was prepared as a liquid phase. The liquefied red mud was added to cement mortar and the strength and color difference of cement mortar were investigated according to the addition amount of liquefied red mud. As a result, the compressive strength decreased with increasing amount of liquefied red mud. The color of cement mortar containing liquefied red mud was found to be distributed in the range of YR series in all samples. As the amount of liquefied red mud increased, the color became darker.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.377-378
• /
• 2009

The purpose of this study was to evaluate basic physical prorerties of color mortar using an industrial by-product called iron sulphate. First as the characteristic of fresh mortar, addition of iron sulphate reduced flow, air content and unit volume weight. Compressive strength was increased the most at substitution of 6% iron sulphate.