• Journal of Korea Multimedia Society
• /
• v.20 no.3
• /
• pp.446-455
• /
• 2017

A color image compression based on saliency map was proposed. The proposed method provides higher quality in saliency blocks on which people's attention focuses, compared with non-saliency blocks on which the attention less focuses at a given bitrate. The proposed method uses 3 different quantization tables according to each block's saliency level. In the experiment using 6 typical images, we compared the proposed method with JPEG and other conventional methods. As the result, it showed that the proposed method (Qup=0.5*Qx) is about 3.1 to 1.2 dB better than JPEG and others in saliency blocks in PSNR at the almost similar bitrate. In the comparison of result images, the proposed one also showed less error than others in saliency blocks.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.99-102
• /
• 2009

In this paper a hierarchical stereo matching algorithm based on feature extraction is proposed. The boundary (edge) as feature point in an image is first obtained by segmenting an image into red, green, blue and white regions. With the obtained boundary information, disparities are extracted by matching window on the image boundary, and the initial disparity map is generated when assigned the same disparity to neighbor pixels. The final disparity map is created with the initial disparity. The regions with the same initial disparity are classified into the regions with the same color and we search the disparity again in each region with the same color by changing block size and search range. The experiment results are evaluated on the Middlebury data set and it show that the proposed algorithm performed better than a phase based algorithm in the sense that only about 14% of the disparities for the entire image are inaccurate in the final disparity map. Furthermore, it was verified that the boundary of each region with the same disparity was clearly distinguished.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.1-7
• /
• 2012

Generally, correction methods for faded images use illuminant estimation algorithms, such as the gray world assumption and white patch Retinex methods, as the phenomenon of color fading is regarded as an illuminant effect. However, this induces inaccurate faded color correction, as images fade at different rates according to the ink property, temperature, humidity, and illuminant. Therefore, this paper presents a color correction method for faded images using classification in LCybCrg color space. The input faded image is first separated according to the chromaticity based on LCybCrg opponent color space. The faded color correction is then performed based on the gray world assumption in RGB color space. Thereafter, weights calculated from CybCrg values are applied to reduce contour artifacts. As a result, the proposed method provides better color correction for faded images than previous methods.

• Journal of Information Processing Systems
• /
• v.13 no.3
• /
• pp.448-463
• /
• 2017

Multimedia is a ubiquitous and indispensable part of our daily life and learning such as audio, image, and video. Objective and subjective quality evaluations play an important role in various multimedia applications. Blind image quality assessment (BIQA) is used to indicate the perceptual quality of a distorted image, while its reference image is not considered and used. Blur is one of the common image distortions. In this paper, we propose a novel BIQA index for Gaussian blur distortion based on the fact that images with different blur degree will have different changes through the same blur. We describe this discrimination from three aspects: color, edge, and structure. For color, we adopt color histogram; for edge, we use edge intensity map, and saliency map is used as the weighting function to be consistent with human visual system (HVS); for structure, we use structure tensor and structural similarity (SSIM) index. Numerous experiments based on four benchmark databases show that our proposed index is highly consistent with the subjective quality assessment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.1
• /
• pp.50-57
• /
• 2005

We present a simple and effective method of face and facial feature detection under pose variation of user face in complex background for the human-robot interaction. Our approach is a flexible method that can be performed in both color and gray facial image and is also feasible for detecting facial features in quasi real-time. Based on the characteristics of the intensity of neighborhood area of facial features, new directional template for facial feature is defined. From applying this template to input facial image, novel edge-like blob map (EBM) with multiple intensity strengths is constructed. Regardless of color information of input image, using this map and conditions for facial characteristics, we show that the locations of face and its features - i.e., two eyes and a mouth-can be successfully estimated. Without the information of facial area boundary, final candidate face region is determined by both obtained locations of facial features and weighted correlation values with standard facial templates. Experimental results from many color images and well-known gray level face database images authorize the usefulness of proposed algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.131-139
• /
• 2008

This paper presents a new saliency map which is constructed by providing dynamic weights on individual features in an input image to search ROI(Region Of Interest) or FOA(Focus Of Attention). To construct a saliency map on there is no a priori information, three feature-maps are constructed first which emphasize orientation, color, and intensity of individual pixels, respectively. From feature-maps, conspicuity maps are generated by using the It's algorithm and their information quantities are measured in terms of entropy. Final saliency map is constructed by summing the conspicuity maps weighted with their individual entropies. The prominency of the proposed algorithm has been proved by showing that the ROIs detected by the proposed algorithm in ten different images are similar with those selected by one-hundred person's naked eyes.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.808-810
• /
• 2004

본 논문에서는 Contrast map과 Salient point를 이용하여 영상에서 중요한 객체를 자동으로 추출하는 방법을 제안한다. 우선 인간의 시각 체계와 유사한 밝기(luminance), 색상(color) 그리고 방향성(orientation) 3가지의 특징정보를 이용하여 각각의 특징정보로부터 feature map을 생성하고 이 3가지의 feature map을 선형 결합하여 contrast map을 생성한다. 이렇게 생성된 하나의 contrast map을 이용하여 대략적인 Attention Window (AW)의 위치를 결정한다. 다음으로, 영상으로부터 웨이블릿 변환을 적용하여 salient point를 찾고, salient point의 분포와 contrast map의 중요도에 따라 AW의 크기를 실제 중요 객체의 크기와 가장 유사하도록 축소시킨다. 이렇게 선택되고 축소된 AW안에서 실제 중요 객체를 추출하기 위해 AW 내부에 존재하는 영상에 대해서만 영상 분할을 하고 불필요한 영역을 제거하여 자동으로 중요객체를 추출하도록 한다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.3
• /
• pp.421-429
• /
• 2019

Objective: In this study, the effects of vacuum (VP) and high-oxygen modified atmosphere ($80%\;O_2+20%\;CO_2$) packaging (HiOx-MAP) on physico-chemical and microbiological properties of minced water buffalo meat were investigated. Methods: After minced meat preparation, samples were packaged under VP and HiOx-MAP and stored at $2^{\circ}C{\pm}0.5^{\circ}C$ for 14 days. Samples taken on certain days were subjected to total aerobic mesophilic bacteria, total aerobic psychrotrophic bacteria, lactic acid bacteria, Pseudomonas, Enterobacteriaceae and yeast-mold counts as well as pH, color ($L^*$, $a^*$, and $b^*$) and thiobarbituric acid reactive substances (TBARS) analyses. Results: In minced water buffalo meat packaged under HiOx-MAP, TBARS value exceeded 1 mg malondialdehyde/kg on the 4th day of the storage. In VP samples, TBARS value remained close to initial TBARS value during storage. According to the findings, $a^*$ value was determined to be high in the HiOx-MAP samples within initial days of the storage. However, no significant changes in $a^*$ value were observed in VP samples during storage. In contrast, the mean value of $L^*$ was detected as higher in HiOx-MAP sample than VP samples. The count of psychrotrophic bacteria increased more than that of mesophilic bacteria during storage. The growth of Enterobacteriaceae and Pseudomonas was delayed in both the packaging methods. However, lactic acid bacteria exhibited more growth in VP samples compared to MAP samples. Conclusion: The lipid oxidation proceeded faster than expected in minced water buffalo meat packed with HiOx-MAP method. This situation adversely affected the $a^*$ value. On the other hand, similar microbiological results were obtained in both packing methods.

• The Journal of the Korea Contents Association
• /
• v.16 no.7
• /
• pp.431-438
• /
• 2016

In this paper, we present an upsampling technique for depth map image using color and depth weights. First, we construct a high-resolution image using the bilinear interpolation technique. Next, we detect a common edge region using RGB color space, HSV color space, and depth image. If an interpolated pixel belongs to the common edge region, we calculate weighting values of color and depth in $3{\times}3$ neighboring pixels and compute the cost value to determine the boundary pixel value. Finally, the pixel value having minimum cost is determined as the pixel value of the high-resolution depth image. Simulation results show that the proposed algorithm achieves good performance in terns of PSNR comparison and subjective visual quality.

• The korean journal of orthodontics
• /
• v.50 no.2
• /
• pp.86-97
• /
• 2020

Objective: To propose a three-dimensional (3D) method for evaluating temporomandibular joint (TMJ) changes during Twin-block treatment. Methods: Seventeen patients with Class II division 1 malocclusion treated using Twin-block and nine untreated patients with a similar malocclusion were included in this research. We collected their cone beam computed tomography (CBCT) data from before and 8 months after treatment. Segmentations were constructed using ITK-SNAP. Condylar volume and superficial area were measured using 3D Slicer. The 3D landmarks were identified on CBCT images by using Dolphin software to assess the condylar positional relationship. 3D models of the mandible and glenoid fossa of the patients were constructed and registered via voxel-based superimposition using 3D Slicer. Thereafter, skeletal changes could be visualized using 3DMeshMetric in any direction of the superimposition on a color-coded map. All the superimpositions were measured using the same scale on the distance color-coded map, in which red color represents overgrowth and blue color represents resorption. Results: Significant differences were observed in condylar volume, superficial area, and condylar position in both groups after 8 months. Compared with the control group (CG), the Twin-block group exhibited more obvious condyle-fossa modifications and joint positional changes. Moreover, on the color-coded map, more obvious condyle-fossa modifications could be observed in the posterior and superior directions in the Twin-block group than in the CG. Conclusions: We successfully established a 3D method for measuring and evaluating TMJ changes caused by Twin-block treatment. The treatment produced a larger condylar size and caused condylar positional changes.