• 한국통신학회논문지
• /
• 제35권4C호
• /
• pp.408-414
• /
• 2010

CCTV이미지에서 교통정보를 수집하려고 할 때 관측자가 카메라를 움직이면 설치된 검지영역이 손실되고 복원하려고 해도 기계적 오차로인해 어려움을 겪게 된다. 그래서 어안이나 거울을 이용하면 카메라를 움직이지 않아도 된다. 하지만 이러한 상황하에서 가장 큰 문제점은 영상의 왜곡이다. 본 논문에서는 이러한 왜곡을 극복하기 위해 비선형 확산 방정식을 이용한 분할과 이 영역에디포메이션을 적용하여 디블러링 한 후 차량정보 수집을 시도한 결과 이전 결과보다 5% 향상된 결과를 얻었다.

• Journal of Radiation Protection and Research
• /
• 제16권2호
• /
• pp.17-26
• /
• 1991

외삽형 전리함을 사용하여 $^{90}Sr+^{90}Y(1.65mCi)$ 베타선원에 대해 교정점 30cm 거리에서 조직표면의 흡수선량을 측정하였다. 이때 흡수선량 측정에 영향을 주는 유효단면적, 입사창 감쇠율, 극성효과, 이온 재결합을 등의 보정인자를 분석하였다. 이들 인자를 보정한 후의 조직표면의 흡수선량은 $1.493{\mu}Gy/sec({\pm}2.9%)$로 평가되었다.

• 한국항공운항학회지
• /
• 제6권1호
• /
• pp.147-163
• /
• 1998

The purpose of this research is to look for the best description of calculating the reasonable Landing Fee. Landing Fee is consisted one of major revenues for maintaining an airport. Traditional Landing Fee Rate has been charged based on the weight factor; Maximum take-off weight, Maximum landing weight, or Maximum authorized weight. To achieve a better reliable value of Landing Fee Rate, The elements of Noise and Peak-Time have to be considered as well as the aircraft weight. This research designs the algorithms for calculating Landing Fee Rate and also Landing Fee, based on the aircraft weight. The Network is also applied to above. That is, CGI(Common Gate Interface) is constructed to interface the terminal of calculating Landing Fee Rate, and the terminal of collecting and transmitting the data such as the Weight. The computer language on the CGI was made by C++ and PERL. The main point of this research is to integrate the airport and Information System and to construct the database which is based on the different perspective of calculating Landing Fee Rate. However, the result of the most efficient and reliable will be computed based on above. This research will broaden the range of application up to the each case of airports.

• 한국임상보건과학회지
• /
• 제8권2호
• /
• pp.1436-1443
• /
• 2020

Purpose: The purpose of this study was to differences in the expression rate of Porphyromonas gingivalis according to smoking status, smoking amount and period of smoking. Methods: At the time of investigation, 30 smokers and non-smokers were recruited among patients with periodontitis with a probing pocket depth(PPD) of 4 mm or more. General information was collected using a self-questionnaire, and the average value was used by a dentist to measure the probing pocket depth of three times each for the first or second molar. Plaque collection and analysis were performed by collecting only subgingival plaque using a conventional method, and the expression rate of P. gingivalis was confirmed using polymerase chain reaction (PCR). For statistical analysis, the SPSS Ver 25.0 program was used. Results: Smoking did not have a significant effect on the expression of P. gingivalis, but it did affect the expression of more type II genotypes (p<0.05). In addition, smokers had more slight periodontal pocket, and the amount and duration of smoking did not affect the expression of P. gingivalis. Conclusions: In the future, it is necessary to reinforce the group of smokers and non-smokers with healthy oral conditions, and to investigate the quantitative difference in the expression rate and genotype of P. gingivalis over time of harmful substances in smoking.

• 한국대기환경학회지
• /
• 제19권4호
• /
• pp.377-386
• /
• 2003

In order to develop a confident sampling technique, we designed and constructed a 6-port manifold MFC sampling system for collecting gaseous pollutants in air. Using this instrumentation, we tested the performance criteria of MFC system in terms of: (1) flow rate; (2) MFC-to-MFC variability; (3) tube-to-tube variability; and (4) time. It was interesting to find that the later two factors did not show any significant variations, while the former two show substantially large variations. However, as most of those variabilities are consistent enough to form systematic patterns, we were able to explain the occurrence patterns of all those MFC biases in terms of those four major variables. The overall results of our experiment suggest that one needs to use correction factor for each MFC unit under a given flow rate to maintain optimal accuracy and precision for sampling of those pollutants.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.708-717
• /
• 2009

Recently, Korea government decided to introduce RPS (Renewable Portfolio Standard) mechanism which requires electricity providers to gradually increase the amount of renewable energy sources such as wind, solar, bioenergy, and geothermal. As a consequence, it is expected that the long-term fuel mix would be changed to result in more expensive production and the increased production costs would be distributed to the rate payers via electricity tariffs. This paper presents the change in long-term fuel mix in year 2020 with the four RPS scenarios of 3%, 5%, 10% and 20%, and the methodologies for collecting the increased production costs through new tariff schedule. The studies on long-term fuel mix have been carried out with the GATE-PRO (Generation And Transmission Expansion Program) optimization package, a mixed-integer program developed by the Korea Energy Economics Institute and Hongik university. Three methodologies for distributing the production costs to the rate payers have also been demonstrated.

• 한국식품위생안전성학회:학술대회논문집
• /
• 한국식품위생안전성학회 2001년도 The Asia-Pacific Conference on Reproductive Biology and Environmental Sciences
• /
• pp.74-77
• /
• 2001

In order to investigate the distribution of paralytic shellfish poison, we examined the toxicity during from February to October in 2000. Of 591 shellfish samples, $17(2.88\%)$ samples were detected. Scapgarca broughtonii was highest collected $14.29\%(2/14)$. In the monthly detection rate of PSP, April was highest $13.3\%(8/60)$, in the regional collecting rate, Cheon-nam coastal area was highest $3.82\%(10/262)$, and in cases of imported area, China was $8.3\%(1/12)$. Imported area as well as domestic area samples should be strengthen to examine enduringly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.235-237
• /
• 2005

This paper presents a method of incorporating weather effects in KEPCO systems reliability evaluation. The effects of adverse weather on composite power system FOR(Forced Outage Rate) increase considerably as the proportion of outages in adverse weather increases. It is therefore important to establish suitable and practical procedures for collecting adverse weather data which can be utilized in realistic KEPCO systems reliability assessment. The modeling procedure proposed in this paper also provides a realistic FOR in KEPCO systems using real historical data.

• International journal of advanced smart convergence
• /
• 제9권3호
• /
• pp.145-152
• /
• 2020

When conducting a health screening, it is important to select the most appropriate hospitals for the screening items. There are various packages in the screening hospitals, and the screening items and price are very different for each package. In this paper, we provide a method of recommending the screening packages in consideration of the customer's preferences such as screening items and minimum matching ratio. First, after collecting package information of hospitals, information such as basic items and optional items in the package are extracted. Then, we determine whether the client's screening items exist in the basic item or optional item of the package and calculate the matching rate of the package. Finally, we recommend screening packages with the lowest price while meeting the minimum matching rate suggested by the client. For performance analysis, we implement a prototype for recommending screening packages and provide the experimental results. The performance analysis shows that the proposed approach provides a real-time response time and recommends appropriate packages.

• 디지털산업정보학회논문지
• /
• 제9권2호
• /
• pp.73-79
• /
• 2013

Cloud computing is a form which provides IT resources through network and pays the cost as much as you used. And it has advantages that it doesn't need to construct infrastructure and can be offered a variety of environments. The main core of these computing is virtualization technology. Security mechanism about attacks using vulnerabilities of virtualization technology isn't provided right and existing security tools can't be applied as it is. In this paper, we proposed honeyVM structure that can cope actively by collecting the information about attacks using virtualization vulnerability. Mamdani fuzzy inference is used to adjust dynamically the number of formed honeyVM depending on the load of system. Security structure to protect actual virtual machine from attacks and threats is proposed. The performance of the proposed structure in this paper measured occurred attack detection rate and resource utilization rate.