• Korean Journal of Construction Engineering and Management
• /
• v.22 no.3
• /
• pp.79-90
• /
• 2021

In domestic public construction, disputes are increasing due to differences among stakeholders regarding contract price adjustment. In particular, the actual cost-plus fee for overhead costs due to the schedule extension cannot be agreed upon at the administrative phase, and most of them seek judicial judgment. Thus, this study aims to propose a 'sufficiently satisfactory' alternative to reach an agreement before disputes in order to minimize disputes related to the calculation of additional overhead costs. To this end, this study proposes three alternatives based on the rate method. Firstly, when calculating additional overhead costs, it is not calculated as an actual cost-plus-fee method, but as a rate compared to direct labor costs among net direct costs. Secondly, the calculated indirect labor costs are compensated for up to the legal maximum of legal limit costs such as general management costs, profits and so on. Thirdly, it reflects overhead costs increased or decreased due to change orders. Risks were analyzed by collecting expert opinions on the proposed methods and applying actual cases. Finally, as a result of investigating the level of consensus for each stakeholder, it was confirmed that all stakeholders could agree regardless of the size of the company. The result of this study is expected to as a useful tool among stakeholders in the construction fields that can be able to easily agreed upon.

• Journal of the Korea Convergence Society
• /
• v.9 no.12
• /
• pp.129-135
• /
• 2018

This study aimed to investigate the contamination rate of microorganisms by times after sterilization in mirrors, dental explorers, and pincettes which are the basic tools used in the dental clinic. 60 samples by each tool were used upon packaging them by 10 units. Contamination rate of microorganisms were tested using dry film media(3M Petrifilm Plates) which is a quick check upon collecting 10 samples right after sterilization, at Week 2, 3, 4, 5, and 6. At Week 0 when was right after sterilization, no microorganism was detected in any tools while they were detected in 2 mirrors, 2 dental explorers, and 2 pincettes at Week 6. 2 to 4 colonies on average were detected in mirrors at Week 2 and 4, 1 to 2 colonies in explorers from Week 5, and no colony was found in pincettes until Week 5 but 1 to 2 colonies at Week 6. Based on these results, the needs of effective periods are suggested for the sterilized tools together with their safe usages.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.8
• /
• pp.573-581
• /
• 2022

This paper deals with the development of CanSat system, which ejects two maple seed-type autorotating science payloads and collects weather information. The CanSat consists of two autorotating science payloads and a container. The container is equipped with devices for launching science payloads and communication with the ground station, and launches science payloads one by one at different designated altitudes. The science payload consists of a space for loading and a large wing, and rotates to generate lift for slowing down the fall speed. Specifically, after being ejected, it descends at a speed of 20 m/s or less, measures the rotation rate, atmospheric pressure, and temperature, and transmits the measured value to the container at a rate of once per second. The communication system is a master-slave structure, and the science payload transmits all data to the master container, which aggregates both the received data and its own data, and transmits it to the ground station. All telemetry can be checked in real time using the ground station software developed in-house. A simulation was performed in the simulation environment, and the performance of the CanSat system that satisfies the mission requirements was confirmed.

• Journal of the Korea Society for Simulation
• /
• v.31 no.3
• /
• pp.35-44
• /
• 2022

In this study, we analyze and forecast quantum computer technology trends. Previous research has been mainly focused on application fields centered on technology for quantum computer technology trends analysis. Therefore, this paper analyzes important quantum computer technologies and performs future signal detection and prediction, for a more market driven technical analysis and prediction. As analyzing words used in news articles to identify rapidly changing market changes and public interest. This paper extends conference presentation of Cha & Chang (2022). The research is conducted by collecting domestic news articles from 2019 to 2021. First, we organize the main keywords through text mining. Next, we explore future quantum computer technologies through analysis of Term Frequency - Inverse Document Frequency(TF-IDF), Key Issue Map(KIM), and Key Emergence Map (KEM). Finally, the relationship between future technologies and supply and demand is identified through random forests, decision trees, and correlation analysis. As results of the study, the interest in artificial intelligence was the highest in frequency analysis, keyword diffusion and visibility analysis. In terms of cyber-security, the rate of mention in news articles is getting overwhelmingly higher than that of other technologies. Quantum communication, resistant cryptography, and augmented reality also showed a high rate of increase in interest. These results show that the expectation is high for applying trend technology in the market. The results of this study can be applied to identifying areas of interest in the quantum computer market and establishing a response system related to technology investment.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.1077-1089
• /
• 2022

With the construction of Seoul National University (SNU), the Mt. Gwanak watershed has undergone some urbanization. As with other campus catchments, data related to the water cycle is extremely limited. Therefore, this study began by collecting hydrological and meteorological data using Atmos-41, a complex meteorological observation instrument. The observation results of Atmos-41 were validated by analyzing the statistical characteristics and confidence intervals based on the monthly variability of data from the Korea Meteorological Administration. Results of the previous research were used to validate the simulated surface runoff and infiltration using the Storm Water Management Model (SWMM). The potential evapotranspiration (PET) simulated by the SWMM was rectified by comparing it to the Atmos-41 observation data. Multiple regression analysis was employed to adjust for the fluctuations in precipitation, relative humidity, and wind speed because the calculated SWMM PET tends to be underestimated during periods of low temperatures. R² increased from 0.54 to 0.80 when compared to the Atmos-41 PET. The rate of change in the water cycle as a consequence of the SNU's construction resulted in a 15.7% increase in surface runoff, a 14.2% decrease in infiltration rate, and a 1.6% decrease in evaporation.

• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.96-107
• /
• 2023

The objective of this study is to explore future issues that Chinese users, who have the highest mobile payment service usage rate in the world, will be most interested in. For this purpose, after collecting text data from a Chinese SNS site, it classifies major keywords into 4 types of future signals by using Keyword Emergence Map (KEM) and Keyword Issue Map (KIM). Furthermore, to understand the four types of signals in detail, it performs the qualitative analysis on text related to each signal keyword. As a result, it finds that the strong signal, which is rapidly growing in keyword appearance frequency during this research period, includes the keywords related to the daily life of Chinese people, such as buses, subways, and household account books. Additionally, it find that the signal that appears frequently now, but with a low increase rate, includes various services that can replace cash payment, such as hongbao (cash payment) and bank cards. The weak signal and latent signal, which appear less often than other two signals, includes the keywords related to promotion events or changes in service regulations. Its result shows that the mobile payment services greatly have changed user's daily life beyond providing convenience. Furthermore, it shows that, in the Chinese market, in which card payment is not common, the mobile payment services have the great potential to completely replace cash payment.

• Analytical Science and Technology
• /
• v.27 no.1
• /
• pp.34-40
• /
• 2014

SPLITT fractionation (SF) allows continuous (and thus a preparative scale) separation of micronsized particles into two size fractions ('fraction-a' and 'fraction-b'). SF is usually carried out in a thin rectangular channel with two inlets and two outlets, which is equipped with flow stream splitters at the inlet and the outlet of the channel, respectively. A new large scale splitter-less gravitational SF (GSF) system had been assembled, which was designed to eliminate the flow stream splitters and thus is operated by the full feed depletion (FFD) mode (FFD-GSF). In the FFD mode, there is only one inlet through which the sample is fed. There is no carrier liquid fed into the channel, and thus prevents the sample dilution. The effects of the sample-feeding flow rate, the channel thickness on the fractionation efficiency (FE, number % of particles that have the size predicted by theory) of FFD-GSF was investigated using industrial polyurethane (PU) latex beads. The carrier liquid was water containing 0.1% FL-70 (particle dispersing agent) and 0.02% sodium azide (used as bactericide). The sample loading rate was varied from about 4 to 7 L/hr with the sample concentration fixed at 0.01%. The GSF channel thickness was varied from 900 to $1300{\mu}m$. Particles exiting the GSF channel were collected and monitored by optical microscopy (OM). Sample recovery was monitored by collecting the fractionated particles on a $0.45{\mu}m$ membrane filter. It was found that FE of fraction-a was increased as the channel thickness increases, and FE of fraction-b was increased as the flow rate was increased. In all cases, the sample recovery has higher than 95%. It seems the new splitter-less FFD GSF system could become a useful tool for large scale separations of various types of micron-sized particles.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.159-163
• /
• 2005

The propriety between suppliers and demanders in geometric design is very important. Although the final purpose of constructing roads is to concern about the driver s comfort, unfortunately, it has not been considered so far. We've considered the regularity and quickness in considering driver's comfort but there should be considered the safety for the accident as well. If drivers are appeared to be more speeding than designer's intention, there will be needed some supplements to increase the safety rate for the roads. Even if both an upward and downward section are supposed to exist at the same time for solid geometry of the roads like this, it is true that the recent design for the 3-D solid geometry section has been done as flat 2-D and the minimum plane curve radius and the maximum cant have been decided just by calculating without considering operating speed between an upward and downward section at the same point. In this investigation, thus, I'd like to calculate the safety of the cant by considering the speed features of the solid geometry for the first lane of four lane rural roads. To begin with, we investigated the driving speed of the car, which is not been influenced by a preceding car to analyze the influence of the geometrical structure by using Nc-97. Secondly, we statistically analyzed the driving features of the solid geometry after comparing the 6 sections, that is, measuring the driving speed feature at 12 points and combining the influence of the vertical geometry and plane geometry to the driving speed of the plane curve which was researched before. Finally, we estimated the value of cant which considers the driving speed not by using it which has applied uniformly without considering it properly, though there were some differences between a designed speed and driving speed through the result of the basic statistical analysis but by introducing the new safety rate rule, a notion of ${\alpha}$. As a result of the research, we could see the driving features of the car and suggest the safety rate which considers these. For considering the maximum cant, if we apply the safety rate, the result of this experiment, which considers 3-D solid geometry, there'll be the improvement of the driver's safety for designing roads. In addition, after collecting and analyzing the data for the road sections which have various geometrical structures by expanding this experiment it is considered that there should be developed the models which considers 3-D solid geometry.

• The Korean Journal of Pesticide Science
• /
• v.13 no.4
• /
• pp.309-314
• /
• 2009

Incidence of rice stripe disease, caused by Rice stripe tenuivirus (RSV), was surveyed during 2002 to 2004. The incidence area and ratio of diseased fields were decreased gradually during those period. Rate of diseased plants were 45.8%, 45.0% and 43.7% in the susceptible cultivars Chucheong, Saechucheong and Ilpum, respectively. However, the rate was 4.4% in resistant cultivar Hwaseong. In addition, breakdown rate was also significantly high in the susceptible cultivars in Chucheong, Saechucheong and Ilpum showing 33.6, 33.2 and 31.9%, respectively. In Hwaseong, the breakdown rate was 0.8%. Collection efficiency was compared between two insect vector collection methods. Insect-sucking machine method was much more efficient than sweeping net method in collecting small brown plant hopper (SBPH). According to the survey of the population density of the insect vector during 2002 to 2004, the national average population density was gradually decreased year by year, 3.6, 2.3, and 1.3%, respectively. This result was significantly related with the decrease of the incidence of rice stripe disease. Control efficiency of rice stripe disease by treating several seedling box and water surface with insecticides against SBPH resulted that imidacloprid GR, Fipronil FG, Clothianidin+Probenazole GR and Thiamethoxam GR showed over 80% of control efficiency at 28 days after treatment at the early stage in nursery.

• Korean journal of applied entomology
• /
• v.59 no.4
• /
• pp.295-301
• /
• 2020

In this study, we aimed to investigate the changes in the catch rate of Monochamus saltuarius, based on sexual maturation by using aggregation-sex pheromone traps. Ovariole development of caught M. saltuarius females was compared to that of the ones not caught using traps. In a mesh cage set up at the Hongneung experimental forest, we placed a multi-funnel trap with or without an aggregation-sex pheromone lure. M. saltuarius adults, which emerged from pine logs, were grouped in four according to the emergence dates (0, 1, 7, and 10 days after emergence [DAE]). We released beetles into the mesh cage to investigate the catch rate using the traps. In each group, a total of 80 beetles (20 beetles × 4 replications) were tested, making it a total of 320 beetles. Among the four groups, M. saltuarius adults in the 7 DAE group were caught more frequently using the traps, especially with a pheromone lure; the other groups showed a low catch rate. A similar number of female and male beetles were caught using the traps. Regarding ovariole development, all the female adults in the 0 and 1 DAE groups were immature, while those in the other two groups were completely developed. Therefore, aggregation-sex pheromone traps might have a limitation in the prevention of pine wilt disease because of the transmission of pine wood nematode during maturation feeding of newly emerged M. saltuarius adults. However, aggregation-sex pheromone traps can be effective for collecting sexually mature M. saltuarius adults, for the investigation of seasonal occurrence of beetles in forests.