• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1909-1923
• /
• 2021

We experimentally investigated the effects of thermal aging and cold work on the microstructure, mechanical properties, and primary water stress corrosion cracking (PWSCC) initiation time for Alloy 182 welds. The effects of thermal aging and cold work on the PWSCC initiation time of Alloy 182 were modeled based on the plastic energy concept and the PWSCC initiation data of this study and previous reports by considering censored data. Based on the results, it is estimated that the PWSCC resistance of the Alloy 182 weld firstly increases and then decreases with thermal aging time when the applied stress is kept constant.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.5
• /
• pp.680-686
• /
• 1998

In the adoption of a desalination system the most important factor is the cost of fresh water pro-duction. In general LNG is stored in a tank as a liquid state below $-162^{\circ}C$ When it is serviced however the LNG absorbs energy from a heat source and it is transformed to a high pressure gaseous state. During this process a huge amount of cold energy accumulated in cooling LNG is wasted. This wasted cold energycan be utilized to produce fresh water by using a sea water freez-ing desalination system. in order to develop a sea water freezing desalination system and to estab-lish its design technique qualitative and quantitative data regarding the freezing behavior of sea water is required in advance. The goals of this study are to reveal the freezing mechanisms of sea water in a cooled circular tube to measure the freezing rate and to investigate the freezing heat-transfer characteristics. The experimental results provide a general understanding of sea water freezing behavior in a cooled circular tube.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2001

This study was carried out to develop a new insolubilizer for water resistency enhancement and to evaluate its optimum apply method to corrugated paper. The addition of polyvinyl alcohol(PVA) backbone polymer to conventional starch glue caused a poor dispersibility, but flavonoid resin addition showed a good runnability and water resistency. The double coatings(top & under) of water-proof chemicals to corrugating liner made even better the water resistency of corrugating paper. This study suggested that water-proof chemical treatments be an effective method in water-resistant corrugating paper manufacturing for a cold chain system.

• Nuclear Engineering and Technology
• /
• v.38 no.5
• /
• pp.455-458
• /
• 2006

The HANARO reactor has a vertical hole for a cold neutron source (CNS) in the heavy-water reflector tank, i.e., the CNS hole, which was considerably deformed during its welding to the horizontal cold neutron (CN) beam tube. This paper presents an investigation of the form of the CNS hole for the optimal design of the a vacuum chamber for the CNS. In addition, the installation method of the vacuum chamber into the CNS hole for minimizing the water thickness between the vacuum chamber and the nose of the CN beam tube is proposed.

• Journal of Environmental Science International
• /
• v.19 no.4
• /
• pp.399-406
• /
• 2010

Based on the Results of Annual Monitoring Report of Korean Marine Environment in 2006, it was shown that the coastal area of the East Sea around Korean peninsula could be clearly divided into two parts: the area of upwelling and the North Korean Cold Current. In the upwelling area, the chlorophyll-a and nutrients were increased by the influence of the decrease of temperature and the increase of salinity. These mean that the appearance of cold water due to the upwelling causes nutrient rich water and also resulted in the high productivity.

• Journal of Ginseng Research
• /
• v.5 no.1
• /
• pp.24-34
• /
• 1981

For bioassay of the various extracts of ginseng, the growth determination method using Saccharomyces cerevisiae which was cultured with various doses of the extracts, was studied The water extract, Powder. and ethanol extract were more effective (about 45∼ 110% increase) than saponins or its fractions (about 20∼35% increase). The cold methanol residue showed a increase effect but it was not significant. The bioassay curves for the water extract, ethanol extract, the butanol extracted saponins and the cold methanol- residue were made from the experimental data. From these curves it is possible to find the relation between dose and effectiveness and the optimal doses of various ginseng extracts, and the amount of extract in a sample can be estimated The .angers of sample amount were 0.01% (100ppm) ∼0.32% (3200ppm) fo. the water extract, 0.025% (150ppm)∼0.1% (1000ppm) for the ethanol extract, and 0.008% (80ppm)∼0.016% (160ppm) for the saponins. It was impossible to determine the range for the cold methanol- residue, The acceleration effects on the cell proliferation by a only 0.0008% (8ppm) of the diol- and triol-saponin were measurable in earlier Period (24 hour treatment).

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.124-131
• /
• 2015

Computational fluid dynamics (CFD) has been employed for the Heat exchanger efficiency of a counter flow heat exchanger. The Heat exchanger efficiency has been assessed by considering the computed Nusselt number and flow friction characteristics in the double pipes heat exchanger equipped with two types twisted-tapes: (1) single clockwise direction and (2) alternate clockwise and counterclockwise direction. Cold and hot water are used as working fluids in shell and tube side, respectively. Hot and cold water inlet mass flow rates ranging are between 0.04 and 0.25 kg/s, and 0.166 kg/s, respectively. The inlet hot and cold water temperatures are 54 and $30^{\circ}C$, respectively. The results obtained from the tube with twisted-tapes insert are compared with plain tube. Nusselt number and friction factor obtained by CFD simulations were compared with correlations available in the literature. The numerical results were found in good agreement with the results reported in literature.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.12
• /
• pp.1719-1723
• /
• 2002

1,5-diphenylcarbazone was immobilized on sodium dodecyl sulfate coated alumina. The alumina particle was effectively used for collection of mercury(II) and methylmercury cations at sub-ppb level. The adsorbed mercury was eluted with l mol $L^{-1}$ of hydrobromic acid solution. The mercury(II) was then directly measured by cold vapor atomic absorption spectrometry utilizing tin (II) chloride where as the total mercury was determined after the oxidation of methylmercury into the inorganic mercury. The methylmercury concentration was calculated by the difference between the value of total mercury and mercury (II). Mercury (II) and methylmercury cations were completely recovered from water with a preconcentration factor of 100 (for 1 L solution.) Relative standard deviation at Hg L ${\mu}gL^{-1}$ level 1.7%(n=8) and the limit of detection was 0.11 ${\mu}gL^{-1}$. The procedure was applied to spring water, well water and seawater and accuracy was assessed through recovery experiments.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.409-414
• /
• 2005

We are interaction refrigeration warehouse cold water pump system and photovoltaic generation system. At this time, a target pressure is able to control in spite of change of the pressure according to pump head and rate of flow of pump. Also, we carry out the vector control of BLDC moor with the maximum torque operation and a high reliability from territory of each operation speed. Therefore, in this paper, we conclude energy saving technique of refrigeration warehouse cold water pump system.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.143-150
• /
• 2010

This study examined the effect of cold water finger immersion at various water temperature on cold-induced vasodilation (CIVD) and its reproducibility to the cold stress. Ten healthy collegiate men ($21.4{\pm}2.5$ yrs, $175.8{\pm}4.1$ cm, $69.6{\pm}7.6$ kg, $11.2{\pm}3.7$ %fat) underwent two tests. At the first test (1ST), subjects immersed their middle fingers at $43^{\circ}C$ water for 5 min followed by a resting at an ambient air for 25 min. Then they immersed the finger at one of the five water temperatures (Tw: 5, 8, 11, 14, or $17^{\circ}C$) at random order for 20 min. Once a testing at one Tw was completed, they immediately repeated the testing procedure for another Tw. The second test(2ND) was performed within a week after 1ST with having an identical procedure of 1ST except the order of Tw. During the test, rectal temperature, finger temperature from middle finger nail bed, and heart rate were measured every six second. In conclusion, maximal finger temperature(Tfmax), and Tfmax minus Tw was highly reproducible in this experiment. Minimal finger temperature (Tfmin) and Tfmax were higher as Tw decreased. And Tfdiff was higher as the colds tress decreased. No differences were found in time variables of temperature responses.