• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.66-71
• /
• 2001

In this work, an ER clutch has been constructed and its characteristics have been evaluated by adapting an electro-rheological fluid(ERF) as an operating medium. ER fluids are suspensions which show an abrupt increase in rheological properties under electric fields. An ER clutch system using ER fluid is a new conception device because an apparent viscosity of ER fluid can be changed by apply an electric field. As a first, Bingham properties of ER fluids are experimentally distilled as a function of electric field. We use the disk type ER clutch in which the ER fluid fills the annular space between a pair of coaxial disk electrodes and experiment results show that the measured revolution per minute was increased with the increase of the electric field. The ER fluid used in the present study consists of weight fraction 35% in zeolite suspended silicone oil.

• 한국가시화정보학회:학술대회논문집
• /
• 2003.11a
• /
• pp.91-94
• /
• 2003

The present study addresses experimental results to investigate the details of the near field flow structures produced in the under-expanded, dual, coaxial, swirling, jet. The sonic swilling jets are emitted from a sonic inner nozzle and the outer annular nozzle produces the co/counter swirling streams against the primary swirling jet, respectively. The interactions between both the secondary annular swirling and primary inner supersonic swirling jets are quantified by the pilot impact and static pressure measurements, and visualized by using the Schlieren optical method. The experiment has been performed fur different swirl intensities and pressure ratios. The results obtained show that the secondary co-swirling jet significantly changes the inner under-expanded swirling jet, such as the recirculation zone, pressure distribution, through strong interactions between both the swirling jets, and the effect of the secondary counter-swirling jet on the primary inner jet is similar to the secondary co-swirl jet case.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.967-976
• /
• 1994

A tensor invariant model equation for the turbulent energy dissipation rate is proposed in the present study, which is able to simulate secondary straining effects such as curvature effects without the introduction of additional empirical input. The source term in this model has a combined form of the generation term due to the mean vorticity with the conventional one due to the mean strain rate. An extended low-Reynolds-number $k-\epsilon$ turbulence model involving this new model equation is tested for a turbulent Coutte flow between coaxial cylinders with inner cylinder rotated, which is a well defined example of curved flows. The predicted results indicate that the present model works much better for this flow, compared with previous models.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.3 no.1
• /
• pp.12-17
• /
• 1966

A more extensive theoretical analysis for a ferrite filled electromagnetic delay line of two coaxial anisotropic conducting cylinders was made and improvements of the delay line n=0 mode operation was achieved by separating effective sections using short-circuited coils to eliminate unnecessary couplings among windings of different phase. Time delay of order of 10 microseconds per meter in video frequency range was observed from 3"/8 diameter 6" long delay line tilled with ferrite material. Design formula was presented with illustrative discussions to help design for practical purposes. purposes.

• Clean Technology
• /
• v.10 no.4
• /
• pp.215-220
• /
• 2004

Micronized acetaminophen was precipitated from ethanol solution using supercritical $CO_2$ as antisolvent. A coaxial nozzle was used to introduce the supercritical $CO_2$ and the acetaminophen/ethanol solution. The effects of pressure, temperature, $CO_2$ flow rate and solvent flow rate were studied in the constant pressure and temperature condition. The particle size and morphology were influenced by the variations of precipitation condition. The particle size and morphology were analyzed with scanning electron microscopy.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.31-38
• /
• 1993

Horn rudders or flap rudders with a gap between forward and after part are used for effective steering of a ship or a submerged body. It is necessary to analyze the effect of a gap since it affects the performance of rudders. In this paper, an equation to calculate the lift acting on a two-dimensional flap rudder in uniform flow is derived by using the thin hydrofoil theory and the analytic solution of viscous flow in a channel formed by two coaxial cylindrical walls to which a pressure gradient is applied.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.300-301
• /
• 2009

In order to design a special illuminator required for an automated optical inspection system, distributions of illuminating angles and intensities of illuminating rays incident on a specimen surface are taken into consideration. This methodology is tried to optimize coaxial illuminating systems by using the specially-coded program.

• Current Optics and Photonics
• /
• v.1 no.6
• /
• pp.631-636
• /
• 2017

We firstly develop a straightforward method to generate full $Poincar{\acute{e}}$ beams with any polarization geometry over an arbitrary order $Poincar{\acute{e}}$ sphere. We implement this by coaxial superposition of two orthogonal circular polarized beams with alternative topological charges with the help of a Mach-Zehnder interferometer. Secondly we find the existence of singularity points. And the inner relationship between their characteristics and the order of $Poincar{\acute{e}}$ spheres is also studied. In summary, this work provides a convenient and effective way to generate vector beams and to control their polarization states.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.2
• /
• pp.11-15
• /
• 2013

We in order to use WLAN communication device planned wireless USB dongle internal antenna of 2.4 GHz/5.8 GHz band. So it uses square patch dual-wideband and quality is satisfactory and it designed print folded monopole antenna of the shape which is simple. The thickness of the antenna was fed by a $50{\Omega}$ coaxial cable feeding 1mm dielectric constant 4.4 FR4 substrate was used. The overall size of the antenna is $20mm{\times}50mm$. So the internal antenna is suitable. Measurement results of the fabricated antenna, the return loss of more than 10 dB in the two bands could be obtained. Radiation pattern has a maximum gain of 3.75 dBi value.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.1047-1051
• /
• 2004

Charge amplifier systems benefit from the very wide dynamic range of PE accelerometers by offering flexibility in adjusting the electrical output characteristics such as sensitivity and range. They are well suited for operation at high temperatures. Modern charge systems feature improved low noise operation, simplified digital controls, and dual mode operation for operation with charge or IEPE voltage mode sensors. high impedance circuitry is not well suited for operation in adverse field or factory environments. The resolution of a PE accelerometer may not be specified or known since noise is a system consideration determined by cable length and amplifier gain. IEPE accelerometrs operate from a constant current power source, provide a high-voltage, low-impedance, fixed mV/g output. They operate through long, ordinary, coaxial cable in adverse environments without degradation of signal quality. They have limited high temperature range. IEPE sensors are simple to operate. Both resolution and operating range are defined specifications. Cost perchannel is lower compared to PE systems since low-noise cable and charge amplifiers are not required.