• 한국세라믹학회지
• /
• 제42권12호
• /
• pp.827-832
• /
• 2005

In this study, thin electrolyte layer was prepared by 8YSZ ($8mol\%$ Yttria-Stabilized Zirconia) slurry dip and sol coating onto the porous anode support in order to reduce ohmic resistance. 8YSZ polymeric sol was prepared from inorganic salt of nitrate and XRF results of xerogel powder exhibited similar results $(99.2\pm1wt\%)$ compared with standard sample (TZ-8YS, Tosoh Co.). The dense and thin YSZ film with $1{\mu}m$ thickness was synthesized by coating of 0.7M YSZ sol followed by heat-treatment at $600^{\circ}C$ for 1 h. Thin film electrolyte sintered at $1400^{\circ}C$ showed no gas leakage at the differential pressure condition of 3 atm.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.387-392
• /
• 2005

For the production of further functional bio-degradable plastic(polybutylene succinate:PBS) with $TiO_{2}$ as photocatalyst, which shows the decomposition of detrimental organic compound and pollutant under ultraviolet irradiation, we attempted to prepare $TiO_{2}$ coatings on PBS substrate by HVOF and plasma spraying techniques under various conditions. The microstructures of coatings were characterized with SEM and XRD analysis, and the photocatalytic efficiency of coatings was evaluated through the photo degradation of gaseous acetaldehyde. The effects of primary particle size and spraying parameters on the formation behavior, photo catalytic performance and mechanical characteristics of the coatings have been investigated. The results indicated that with respect to both the HVOF sprayed $P_{200}$ and $P_{30}$ coatings, the high anatase ratio off 100% can be achieved regardless of fuel gas pressure. On the other hand, the HVOF sprayed $P_{7}$ coating exhibited largely decreased anatase ratio (from 100% to 49.1%) with increasing the fuel gas pressure, which may be attributed to the much higher susceptibility to heat of 7nm agglomerated powder. In terms of photocatalytic efficiency, HVOF sprayed $P_{200}$ and $P_{30}$ coatings seem to predominate as compared to that of plasma sprayed $P_{200}$ coatings owing to the higher anatase ratio. However, the HVOF sprayed $P_{7}$ coatings didn't show the photo catalytic activity, which may result from the extremely small reaction surface area to the photo-catalytic activity and low anatase ratio. Such functional PBS with new roles is expected to cosiderably contribute to the reduction of aggravated environmel problem.

• 한국수산과학회지
• /
• 제49권6호
• /
• pp.750-757
• /
• 2016

This study investigated the quality, sensory characteristics and commercial potential of a rice snack prepared with dried oyster. Mild and spicy versions of the snack were produced using an oil coating and a mixed seasoning powder coating, respectively. The approximate compositions of the mild snack and spicy snack were 5.13% and 4.78% moisture, 8.92% and 8.94% crude proteins, 17.58% and 20.35% crude lipids, 1.88% and 1.87% ash, and 2% and 1.8% salt, with water activity values of 0.20 and 0.18 and a pH of 6.11 and 6.10, respectively. The color of the mild snack was lighter with more yellow and less red compared with the spicy snack. Thiobarbituric acid levels increased slightly, and hardness decreased slightly during storage at $27{\pm}2^{\circ}C$. The sensory score of the spicy snack was slightly higher than that of the mild snack. These results suggest that the spicy snack might have more commercial potential than that of the mild snack according to its higher sensory test score.

• 한국전기전자재료학회논문지
• /
• 제29권3호
• /
• pp.168-174
• /
• 2016

A conductive oxide-based sapphire glass indium tin oxide/metal electrode and the optical coating, through patterning process was studied in excellent optical properties and integrated touch panel has a high strength. Indium tin oxide conductive oxides of the sapphire glass to 0.3 A at DC magnetron sputtering method of 10 min, gas flow Ar 10 Sccm Ar, $O_2$ 1.0 Sccm the formation conditions of the thin film after annealing at $550^{\circ}C$ for 30min was achieved through a 86% transmittance. In addition, the coating 130 nm hollow silica sol-gel was to improve the optical transmittance of the indium tin oxide to 91%. For the measurement by the modeling hollow silica sol by Macleod simulation and calculated the average values of silica part to the presence or absence in analogy to actual. Refractive index value and the actual value of the material on the simulation the transmittance difference is it does not completely match the air region similar to the actual value (transmission) could be confirmed that the measurement is set to a value of between 5 nm and 10 nm.

• Fisheries and Aquatic Sciences
• /
• 제25권4호
• /
• pp.243-249
• /
• 2022

Bacillus SW1-1 is a probiotic isolated from shrimp intestines. We investigated the effects of Bacillus SW1-1 coated diets on the growth, feed utilization, innate immunity, hematological parameters and resistance to Edwardsiella tarda in olive flounder (Paralichthys olivaceus). A commercial diet was used as the control (AP0) and two other diets were prepared by coating 0.25% (AP25) or 0.50% (AP50) probiotic powder which contains 1.0 × 10⁷ CFU/g Bacillus SW1-1. Four replicate groups of olive flounder (153 ± 2 g) were fed one of the diets for 12 weeks. Growth performance and feed utilization of the fish were not significantly affected by the dietary Bacillus SW1-1. After the challenge with E. tarda, AP50 group showed significantly higher survival than AP0 and AP25 groups. Innate immunity and anti-oxidant capacity of the fish were not significantly affected after the feeding trial. However, after the E. tarda challenge, the innate immune parameters (immunoglobulin, lysozyme and anti-protease) were significantly improved in fish fed AP25 and AP50 diets compared to those in fish fed AP0 diet. After the challenge test, significantly lower glucose level was observed in AP50 group compared to AP0 group. These results indicate that dietary supplementation of Bacillus SW1-1 could increase the disease resistance of olive flounder against E. tarda infection. The optimum coating levels of Bacillus SW1-1 needs to be further elucidated.

• 한국건축시공학회지
• /
• 제23권6호
• /
• pp.727-738
• /
• 2023

계면은 콘크리트 강도 결정 요인 중 가장 약한 영역으로, 골재와 시멘트 페이스트 사이에서 형성된다. 경량골재는 원재료를 팽창, 소성시켜 제조하기 때문에 표면에 수많은 공극을 형성하여 밀도가 낮은 장점을 지니지만 골재 강도가 약하다. 콘크리트는 골재강도가 약하면 골재의 파단이 발생한다. 경량골재의 콘크리트 적용은 골재 파단 때문으로 계면의 강도가 중요하다. 본 연구에서는 경량골재의 계면강도 증진을 위해 고로슬래그 미분말로 골재표면을 코팅하고, 시험체의 임피던스를 비교하여 표면개질에 의한 계면 변화를 분석하였다. 실험결과, 경량골재 표면코팅 시 압축강도가 약 4%정도 증가하였고, 강도 증가에 따라 임피던스 값 중 레지스턴스 값이 증가하는 것을 확인하였다.

• 농약과학회지
• /
• 제14권3호
• /
• pp.219-225
• /
• 2010

농약의 제형이 입제인 경우 제조방법에 따라 물중에 용해되는 정도가 다르게 나타난다. 본 연구에서는 제조방법이 다른 흡착식 입제인 butachlor 5% GR와 fipronil 0.4% GR, 그리고 피복식 입제인 carbosulfan 3% GR와 diazinon 3% GR를 사용하여 잉어(C. carpio), 송사리(O. latipes) 그리고 미꾸리(M. anguillicaudatus)에 대한 급성 어독성시험을 수행하였다. 시험용액 조제방법은 물에 입제농약을 직접 처리하는 방법과 농약 입제를 마쇄한 후 처리하는 방법으로 구분하여 96시간까지 반수치사농도($LC_{50}$)를 구하였고, 아울러 시간경과에 따른 물중 농약 잔류농도를 측정하였다. 시험결과, 4종의 농약 모두 물에 농약을 적접 처리한 시험구보다 농약을 마쇄하여 처리한 시험구에서 1.2~4배 정도 독성이 높게 나타났으며, 시간의 경과에 따른 독성증가가 뚜렷하게 나타났다. 그리고 butachlor GR의 diazinon GR의 잔류농도는 마쇄처리구에서 빠른 시간에 많은 양이 검출되었다. 결론적으로 입제 형태의 농약을 물에 직접 처리하는 것보다 마쇄 후 처리하였을 때 물중 잔류 농도와 독성치가 높게 나타났으며, 48시간보다 96시간의 독성값이 비교적 안정적이고 오차가 작았다.

• Korean Chemical Engineering Research
• /
• 제54권3호
• /
• pp.410-418
• /
• 2016

본 연구에서는 Multi-Walled Carbon Nanotube (MWCNT)와 니켈 분말을 포함하는 전기 전도성 복합체를 제조하여 물성을 비교하였다. 복합체 제조에 앞서, MWCNT 표면을 개질하여 카르복실기(-COOH)와 아미노기($-NH_2$)를 도입하였으며, 표면 개질 혹은 개질되지 않은 MWCNT와 니켈 분말을 diglycidyl ether of bisphenol A (DGEBA)에 분산하여 전기 전도성 복합체를 제조하였다. 그리고 triethylenetetramine (TETA)를 경화제로 사용하여 전도성 복합체와 혼합한 후, doctor blade법으로 코팅하여 전기전도성 변화를 측정하였다. MWCNT의 표면 개질 여부와 에폭시 수지와의 반응여부는 fourier transform infrared (FTIR) spectrometer, thermogravimetric analyzer (TGA) 및 elemental analyzer (EA)로 확인하였으며, 복합체의 표면 형상은 scanning electron microscope (SEM), 복합체의 면 저항 값은 4-point probe로 측정하였다. 그 결과 아미노기로 표면 개질한 MWCNT 0.5 wt%와 40%의 니켈 분말을 사용하여 제조한 복합체의 면 저항 값은 $(9.87{\pm}1.09){\times}10^4{\Omega}/sq$로 니켈 분말만 53.3% 사용하여 제조한 복합체의 면 저항 값과 유사한 값을 나타내었다. 따라서, 0.5%의 아미노기로 개질된 MWCNT를 포함하는 전도성 복합체는 순수 니켈 분말만 사용하는 복합체보다 13.3%의 니켈 분말 함량을 감소할 수 있음을 알았다.

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1719-1723
• /
• 2009

The LiFeP$O_4$ powder was synthesized by using the solid state reaction method with Fe($C_2O_4){\cdot}2H_2O,\;(NH_4)_2HPO_4,\;Li_2CO_3$, and chitosan as a carbon precursor material for a cathode of a lithium-ion battery. The chitosan added LiFePO4 powder was calcined at 350 ${^{\circ}C}$ for 5 hours and then 800 ${^{\circ}C}$ for 12 hours for the calcination. Then we calcined again at 800 ${^{\circ}C}$ for 12 hours. We characterized the synthesized compounds via the crystallinity, the valence states of iron ions, and their shapes using TGA, XRD, SEM, TEM, and XPS. We found that the synthesized powders were carbon-coated using TEM images and the iron ion is substituted from 3+ to 2+ through XPS measurements. We observed voltage characteristics and initial charge-discharge characteristics according to the C rate in LiFeP$O_4$ batteries. The obtained initial specific capacity of the chitosan added LiFeP$O_4$ powder is 110 mAh/g, which is much larger than that of LiFeP$O_4$ only powder.

• 문화기술의 융합
• /
• 제8권6호
• /
• pp.661-666
• /
• 2022

이 연구는 내용연수에 따른 분말소화기 저장용기의 부식정도와 소화성능 변화를 고찰하여 상시 적정 성능을 확보하기 위해 시장지역, 공장지역, 공동주택지역을 대상으로 실험을 실시하여 다음과 같은 결론을 도출하였다. 첫째, 외부접촉 저장용기 부식 정도에 대한 실험값이 2012년 공동주택지역에서 부적합으로 나타났다. 둘째, 소화기 내구연한은 10년이나 1회에 한하여 샘플검사에 통과하면 길게는 13년을 사용하게 되지만, 사실상 소화기 수명은 배치장소의 주위환경 과 내용연수에 따라 차이가 크게 다르게 나타나는 것으로 분석되었다. 마지막으로 소화기 배치장소의 환경이 취약한 경우에는 더욱 빠르나, 통상적인 관리하에서 소화기의 내용연수 7~8년부터 소화기 저장용기의 부식이 일어나기 시작하므로 소화기의 내용연수를 5년 정도로 줄이는 것이 타당하다고 판단된다.