• Clean Technology
• /
• v.24 no.4
• /
• pp.323-331
• /
• 2018

The results of an experimental investigation on the co-firing characteristics and slagging behavior of dried and hydrothermal carbonization sewage sludge, sub-bituminous coal, and wood pellet in a fluidized bed were presented. Combustion tests were conducted in a lab-scale bubbling fluidized bed system at the uniform fuel-air equivalence ratio, air flow rate, and initial bed temperature to measure bed temperature distribution and combustion gas composition. 4 different fuel blending cases were prepared by mixing sewage sludge fuels with coal and wood pellet with the ratio of 50 : 50 by the heating value. $NO_x$ was mostly NO than $NO_2$ and measured in the range of 400 to 600 ppm in all cases. $SO_2$ was considered to be affected mostly by the sulfur content of the sewage sludge fuels. The cases of hydrothermal carbonization sewage sludge mixture showed slightly less $SO_2$ emission but higher fuel-N conversion than the dried sewage sludge mixing cases. The result of fly ash composition analysis implied that the sewage sludge fuels would increase the possibility of slagging/fouling considering the contents of alkali species, such as Na, K, P. Between the two different sewage sludge fuels, dried sewage sludge fuel was expected to have the more severe impact on slagging/fouling behavior than hydrothermal carbonization sewage sludge fuel.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.8
• /
• pp.683-691
• /
• 2015

Circulating Fluidized Bed(CFB) combustion has the several advantages which are the fuel flexibility, the economy, the efficiency and the environment. It is necessary to apply a renewable energy to produce electricity due to the Renewable Portfolio Standard(RPS) mandates recently. So, in this study, co-combustion with a coal and a wood pellet was investigated to evaluate the combustibility and the environment as function of blending ratio of them in a Lab-scale CFB reactor. To investigate the characteristics of the co-combustion, the blending ratio which is the weight of wood pellet by the total calorific value of the supplied, was considered. Bed material was a river sand(No. 7). As increasing the blending ratio, the exhausted gas emissions such as CO, NOx, HC and SOx were decreased. But in case of wood pellet over 30%, CO, HC and SOx emission were increased. And the gas temperatures at the downstream were decreased.

• Economic and Environmental Geology
• /
• v.48 no.1
• /
• pp.65-75
• /
• 2015

The CBM(Coalbed Methane) development technology being developed in mid 1980s is the technology to produce the methane gas absorbed in the coal bed. CBM is easy to be developed and its coal deposit is abundant. Therefore, the CBM industry has a large potential as an energy source as well as to deal with the global regulations for reducing greenhouse gas emission. In order to produce coal, the CBM should first be developed as a preliminary action for mine security. So CBM is advantageous in reducing the global greenhouse gas as well as its advantage not being influenced by the changes in gas market. The ECBM (Enhanced Coalbed Methane) is a new technique producing the methane gas which is substituted and disorbed from coal by injecting $CO_2$ or $N_2$ gas into a coal bed. Especially, $CO_2$-ECMB is a low-carbon, green-growth technology, so can expect to the effect of green gas reduction as well as the improved productivity of methane gas. CBM technology is being developed in about 40 nations including Canada, Australia, China, India, Indonesia and Viet Nam, and the coal output using this technology is continually being increased. The CBM is expected to contribute in changing the energy source paradigm from current coal & petroleum energy to unconventional gas.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.7-16
• /
• 1998

Numerical computations were performed for the gasification of five different coals such as Lewis-Stockton bituminous, Utah bituminous. Illinois #6 bituminous, Usibelli sub-bituminous and Beulah-Zap lignite, to assess the effect of variation in oxygen to coal ratio and steam to coal ratio on reactive flow fields within an axisymmetric, entrained-flow gasifier. The concentrations of major products, CO and $H_2$, were calculated with varying oxygen to coal ratio(0.7~1.4) and steam to coal ratio. To verify the validity of predictions, the predicted and the measured values of CO and $H_2$ concentrations at the exit of the gasifier were compared for Roto coal. Reasonable agreement was obtained between the predicted and measured values. Predictions showed that the (CO+H_2$) concentration increased gradually to its maximum value with increasing oxygen-coal ratio, and CO concentration decreased, but $H_2$ concentration increased to some extent with increasing steam-coal ratio. When the oxygen-coal ratio was between 1.0 and 1.2, and the steam-coal ratio was between 0.3 and 0.4, high values of the cold-gas efficiency were obtained.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.31-36
• /
• 1998

가압유동층 복합발전(Pressurized Fluidized Bed Combustion Combined Cycle 또는 PFBC-CC)은 고효율 및 공해물질 배출이 적은 석탄이용 차세대 발전기술이다. 석탄을 연소하면서 발생되는 열은 스팀으로 회수하여 스팀터빈을 구동하고, 고온, 고압의 연소가스로 가스터빈을 구동하여 복합 발전함으로서 효율을 42- 45%까지 얻을 수 있으며, 유동층연소의 장점인 연소중 탈황과 낮은 질소산화물 배출특성으로 환경친화적이며 경제성이 우수한 청정석탄 이용기술이다. (중략)

• Journal of the Korean Professional Engineers Association
• /
• v.46 no.2
• /
• pp.44-50
• /
• 2013

The treatment of city life wastes is headache problem. Now, only small portion of burnable wastes is burnt at modern process incinerators, the other large portion is buried in the soil by landfill method. The burnable wastes will be increased year by year. The dioxin, the cancer-causing agent, produced by incineration of wastes influences harmful effect to national human health. The new idea of burnable wastes treatment is using the city life wastes as auxiliary fuel of fluidizing bed combustion boiler of large scale coal-fired power plant. The dioxin-free treatment of burnable wastes is sucessfully achieved by burning the wastes, in flyash storm at fluidizing bed combustion boiler.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1311-1320
• /
• 2005

The purpose of this research is to survey characteristics of microbial community and the removal efficiency of organic materials for biological activated carbon in water treatment plant. Coal based activated carbon retained more attached bacterial biomass on the surface of the activated carbon than the other activated carbon with operating time and materials. The heterotrophic plate count(HPC), eubacteria(EUB) and 4,6-diamidino-2-phenylindole(DAPI) counts were ranged from $0.95{\times}10^7$ to $52.4{\times}10^7$ CFU/g, from $3.8{\times}10^8$ to $134.2{\times}10^8$ cells/g and from $7.0{\times}10^8$ to $250.2{\times}10^8$ cells/g, respectively. The biomass of EUB and DAPI appeared to be much more $10^2$ than HPC, which were increasing in bed volume of 20,000 at the stage of steady-state. The change of microbial community by analyzing fluorescent in situ hybridization(FISH) method with rRNA-targeted oligonucleotide probes, the dominant group was $\alpha$-proteobacteria($\alpha$ group) and high G+C content bacteria(HGC) the lowest distributing rate before reaching the bed volume of 20,000. After reaching the bed volume of 20,000, $\alpha$ group and other groups of bacteria became decreased, on the other hand, the proportion of both $\beta$-proteobacteria($\beta$ group) and $\gamma$-proteobacteri($\gamma$ group) were increasing. Coconut and wood based activated carbons had similar trend with coal based activated carbon, but the rate of $\alpha$ group on coal based activated carbon had gradually increased. Bacterial production with the operating period appeared highest in coal based activated carbon at the range of $1.2{\sim}3.4\;mg-C/m^3{\cdot}h$ while the coconut and wood based activated carbon were ranged from 1.1 to 2.6 $mg-C/m^3{\cdot}h$ and from 0.7 to 3.5 $mg-C/m^3{\cdot}h$ respectively. The removal efficiency of assimilable organic carbon(AOC) showed to be highly correlated with bacterial production. The correlation coefficient between removal efficiency of AOC and bacterial production were 0.679 at wood based activated carbon, 0.291 at coconut based activated carbon and 0.762 at coal based activated carbon, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.71.1-71.1
• /
• 2011

석석탄가스화 기술은 고온, 고압 조건에서 미분탄과 산소의 가스화 반응에 의해 CO와 $H_2$가 주성분인 합성가스를 제조하는 기술로서 차세대 화력발전 뿐만아니라 다양한 화학원료 제조를 위한 분야에서 각광을 받고 있다. 또한, 가스화 기술은 향후 CCS기술, CTL(Coal To Liquid, 석탄액화)기술, SNG(Synthetic Natural Gas, 합성천연가스)생산, 수소생산, 각종 화학원료 생산 등과 연계가 가능한 미래 석탄이용 분야의 핵심 기술이라 할 수 있다. 따라서, 고등기술연구원에서는 이러한 석탄가스화를 통해 양질의 합성가스를 제조하기 위한 기술 개발의 일환으로 pilot급 고온, 고압 건식 분류층 가스화기, 기류수송 방식의 미분탄공급장치, 수냉자켓 구조의 합성가스 냉각장치, 합성가스 중 분진제거를 위한 금속필터 장착 집진장치 등을 연계하여 20기압의 고압 조건에서 장시간 연속운전을 진행하였다. 본 연구에서는 미분탄 공급을 위하여 상부공급 버너를 적용하였고 석탄가스화기는 $1,300{\sim}1,350^{\circ}C$ 정도의 온도에서 운전을 진행하였으며 미분탄을 75 kg/h의 조건에서 연속적으로 공급하였다. 그리고, 이러한 조건에서 5.5일 정도의 연속운전을 진행하는 동안 CO 44~48%, $H_2$ 20~21%, $CO_2$ 4~5% 조성의 석탄 합성가스를 $200Nm^3/h$ 안정적으로 제조할 수 있었다.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.3
• /
• pp.219-225
• /
• 2010

Optimal grinding condition was examined by changing only the size of screen opening with fixing other factors to produce coal fines of particle sizes required for circulating fluidized bed gasifier. At least 85 wt% of the coal particles should fall into the size range of 0.045~1.0 mm for efficient gasification. In this study, hammer mill was used to grind Chinese low rank lignite coal following grinding condition designed by Taguchi method. The analysis of signal to noise ratio showed that optimum grinding condition for the gasifier was 3 mm in primary screen size and 1.3 mm in secondary screen size on the 95% level of significance.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.566-574
• /
• 2011

Coal gasifier is a key component for achieving high efficiency in integrated gasification combined cycle and indirect coal liquefaction. Although there have been several successful coal gasifiers that were commercially proven, many different design configurations are still possible for a simple and reliable gasifier operation. Four different gasifier design concepts of dry-feeding were compared in terms of residence time, exit syngas temperature and syngas composition. First, cold-flow simulation was applied to pre-select the configuration concepts, and the hot-flow simulation including chemical reactions was performed to compare the concepts at more actual gasifier operating conditions. There are many limitations in applying CFD method in gasifier design, particularly in estimating slag behavior and slag-tap design. However, the CFD analysis proved to be useful in comparing the widely different gasifier design concepts as a pre-selection tool.