• 산업기술연구
• /
• 제21권B호
• /
• pp.149-153
• /
• 2001

A study on the particle growth in $TEOS/O_2$ plasma was performed, and particle size and its distribution was measured by the electrical aerosol analyzer (EAA), light scattering particle size analyzer and the particle size was also determined by SEM. The effects of process variables such as total gas flow rate, reactor pressure, supplied power and initial reactant concentration on the particle growth were investigated. From the EAA results, the particle size distribution is divided into three groups of the cluster size and the small and large size particles. The particle size distribution measured by the light scattering particle size analyzer becomes bimodal, because the cluster size particles smaller than 20 nm in diameter cannot be detected by the light scattering particle size analyzer. The size of particles measured by the light scattering particle size analyzer is in good agreements with those by the SEM. Also we could understand that the particle formation is very sensitive to the changes of reactor pressure and reactant concentration. As the total gas flow rate increases, the particle size decreases because of the shorter residence time. As the reactor pressure, or the reactant concentration increases, the particle concentration increases and the particles grow more quickly by the faster coagulation between particles.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.40-46
• /
• 1998

This study was aimed to investigate any improvement of dewatering and energy saving on the papermaking process when the various types of fillers were used, i.e., clay, talc and grounded calcium carbonate (GCC). Cationic polyelectrolyte and alum coagulants neutralized the surface charge of the filler particles and the filler particles were coagulated. The rates of dewatering and drying were investigated. The results indicated that clay tended to intense anion, while talc and GCC tended to anion trend nearly to neutrality. Clay and talc added with EPI-DMA, P-DADMAC and alum respectively as optimum levels showed a significant efficiency on the dewatering and the turbidity dissipation. However, the turbidity and dewatering rate of GCC decreased, when GCC was added with EPI-DMA and P-DADMAC respectively Drying rate of clay was increased when coagulant added. However drying rates of talc and GCC were not affected by coagulant, while the apprarent drying time of talc and GCC in the absence of any coagulant was shorter than the clay in the presence of a coagulant. The result confirmed that talc or GCC was more efficient than clay on the dewatering and drying, which is consistent with a general knowledge in the collodal science.

• 멤브레인
• /
• 제27권4호
• /
• pp.350-357
• /
• 2017

본 연구는 열유도 상분리법(thermally induced phase separation, TIPS)을 사용하여, 수처리 분리막에 적용하기 위해, 응고조의 온도 및 열용량의 변화에 따른 분리막의 모폴로지 변화를 관찰하였다. 분리막을 제조하기 위한 소재로는 기계적 물성과 내화학성이 우수한 poly(vinylidene fluoride)(PVDF)와 실리카를 이용하였고, 희석제로는 dioctyl phthalate (DOP), dibutyl phthalate (DBP)를 사용하였다. 다양한 응고액의 열용량 변화에 따른 구조 변화 관찰을 위하여 SEM 이미지를 관찰하였다. 열용량이 증가할수록 PVDF의 결정화 속도가 느려져 큰 기공을 나타내며 열용량이 작을수록 결정화 속도가 증가하여 작은 기공이 생기는 것을 확인하였다.

• 한국환경보건학회지
• /
• 제23권3호
• /
• pp.1-6
• /
• 1997

This research was conducted in the laboratory to investigate an alternative of Copper(Cu) removal from an heavymetal wastewater using the electrochemical precipitation(ECP) process. The ECP unit consisted of an electrolytic cell made of Titanium plate and Steel plate representing anode and cathode. The DC power source applied to the ECP unit had electrical potential(E) of 50$\pm$ 1V, respectively. The synthetic wastewater used in the experiments contained Cu in the 10 mg/l concentration and the electrode separation were 2, 3, 4 cm and the initial pH were 3, 6, 9, 12, and electrolytic concentration were 0.005, 0.0125, 0.025, 0.0375 mole, and the real heavymetal wastewater used in the experiments. From the experiment for removal efficiency according to pH variation, the low pH area doesn't give the coagulation effect by Ti(OH)$_4$ because process interfere with the coagulation and oxidation reaction, therefore the optimum pH was 4-7. The removal rate was 97.75% after the lapse of 30 minutes when copper concentration and electrolytic concentration were respectively 10 mg/l and 0.025 mole. The removal rate was 96.41% after the lapse of 30minutes when the real heavymetal wastewater used. The optimum consumption of power showed 27KWh/m$^3$ when copper concentration, electrolyte concentration and cell potential were respectively 10 mg/l, 0.025 mole and 50$\pm$ 1 Volt.

• 대한한방내과학회지
• /
• 제16권1호
• /
• pp.181-196
• /
• 1995

The present experiments were designed to investigate the effects of BangPoongSan on the cardiovascular system in the experimental Animals. And thus the change of blood pressure, auricular blood flow, artery contraction, death rate, platelet aggregation repression, plasma coagulation factor activity, plasma antithrombin activity, whole blood viscosity and plasma viscosity were studied. The result were summarized as the followings: 1. BangPoongSan dropped the blood pressure in the spontaneous hypertensive rat. 2. The drug increased the auricular blood flow in rabbit. 3. The drug relaxed the artery contraction by pretreated norepinephrine in white rat. 4. The drug inhibited the death rate of mouse which was led to thromboembolism by serotonin and collagen. 5. The drug inhibited the platelet aggregation in rat. 6. The drug prolonged the prothrombin time and activated partial thromboplastin time on the test of plasma coagulation factor activity in rat, but was not valuable. 7. The drug presented the antithrombin activity in rat. 8. The drug reduced the whole blood viscosity and plasma viscosity in rat, but the latter was not valuable. According to the results, Bangpoongsan increased the blood flow and dropped the blood pressure by dilatation of blood vessel smooth muscle. And the drug presented the antithrombin acivity, inhibited the platelet aggregation and reduced blood viscosity. Therefore these effects are assumed to improve the cardiovascular circulation disorder and prevent thrombosis.

• Journal of Korean Neurosurgical Society
• /
• 제39권2호
• /
• pp.109-113
• /
• 2006

Objective : Meningioma is a benign tumor which has a high occurrence rate of postoperative hematomas. The purpose of this study is to analyze risk factors for postoperative hemorrhages after meningioma surgery. Methods : One hundred and fifty three patients with intracranial meningiomas, operated at the Department of Neurosurgery, National Medical Center, between January 1995 and December 2003 were included in this retrospective study. Risk factors considered to be related with postoperative hematomas were age, sex, preoperative pharmacological anticoagulants for medical co-morbidity, tumor location, histological type of the meningioma, infiltration of dural sinus and arachnoid, removal range of tumors, and the perioperative coagulation status including prothrombin time, partial thromboplastin time, and platelet count. Results : Patients' aged more than 70 years with a platelet count of less than $150{\times}10^9{\ell}^{-1}$ after surgery had statistically significant relations to the occurrence rate of postoperative hematomas. The other factors had no statistical significance. Conclusion : Various and intensive preoperative examinations for coagulation factors of patients, especially of older age, and proper transfusion before meningioma surgery are necessary for preventing postoperative hematoma.

• Biomolecules & Therapeutics
• /
• 제8권2호
• /
• pp.184-193
• /
• 2000

To evaluate GC-rhEPO, human erythropoietin produced by recombinant DNA technique, its general pharmacological properties were investigated in experimental animals administering intravenously and in vitro test system. GC-rhEPO at doses of 70,700 and 7,000 IU/kg body weight had no influence on general behavior, spontaneous motor activity, thiopental-inducted sleeping time, writhing syndrome induced by acetic acid, strychnine-induced convulsions, charchoal meal propulsion in mice, and body temperature, gastric juice secretion, urine and electrolyte excretion in rats. In anesthetized rabbits, GC-rhEPO (70, 700 and 7,000 lU/kg, i.v.) did not alter respiratory rate, blood pressure, heat rate. In in vitro experiments, GC-rhEPO did not affect the contractions of the isolated ileum of guinea pigs and the muscle twitchs of isolated neuromuscular junction of the rats. In addition, GC-rhEPO did not affect the blood coagulation time and ADP-induced platelet aggregation in plasma of rabbits. Taken together, these results indicate that GC-rhEPO does not induce any adverse effects in the experimental animals.

• 상하수도학회지
• /
• 제22권6호
• /
• pp.633-640
• /
• 2008

In this research, the $3.6m^3/day$ scale pilot plant consisting preozonation, coagulation, flocculation, and ceramic membrane processes was operated for long term period to evaluate the validity of ceramic membrane filtration process for treating lake water containing high concentration manganese. The higher concentration of dissolved manganese($Mn^{2+}$) was effectively oxidized to the bigger insoluble colloidal manganese ($MnO^2$) by 1~2 mg/L ozone. The colloidal manganese reacted with coagulant (poly aluminium chloride, PAC) and then formed the big floc. Ceramic membrane rejected effectively manganese floc during membrane filtration. Dissolved organic carbon(DOC) removal was dependent upon $Mn^{2+}$ concentration. While average $Mn^{2+}$ concentration was 0.43 and 0.85 mg/L in raw water, DOC removal rate in preozonation was 26.5 and 13.5%, respectively. The decrease rate of membrane permeability was faster without preozonation than with preozonation while membrane fouling decreased with NOM oxidation by ozone. In conclusion, raw water containing high concentration of manganese can be effectively treated in preozonation-coagulation-ceramic membrane filtration system.

• 한국환경보건학회지
• /
• 제30권1호
• /
• pp.59-64
• /
• 2004

This study was carried out to investigate influencing factors of bisphenol A(BPA) removal characteristic in conventional water treatment systems to be connected with coagulation, sedimentation, filtration and disinfection. The result are summarized as follows; In BPA removal, optimal doses of PAC, alum, ferric chloride were 7.5 mg Al/L, 10.0 mg AI/L, 15.0 mg Fek. PAC was most effective coagulant to remove BPA. In coagulation process, BPA removal efficiency were increased about 2％ by adjusting pH of raw water as 6. At temperature rise 1$0^{\circ}C$, BPA removal efficiency were increased 0.94％. but BPA removal efficiency in sand filtration process were under 1 ％ie, so that BPA was almost not removed. At free chlorine dose 1, 2 mg/L, the reaction rate constant k in the BPA removal have been calculated to be 0.397, 0.953 min$^{-1}$ . At free chlorine dose 1, 2 mg/1-, degradation reaction of BPA was completed during 10 min and BFA removal efficiencies were 97.66, 99.99％ at this time.

• Clinical and Experimental Reproductive Medicine
• /
• 제20권1호
• /
• pp.79-85
• /
• 1993

Five hundred and fory-four women were provided government funded sterilization reversal services with technique of microsurgery at 15 reversal institutions designated by the Korean Association for Voluntary Sterilization since the inception of Female Reversal Program in 1981. A large majority of reasons for requesting reversal surgery was a loss of children, comprising 87.3%, and the mean interval between sterilization and reversal was 33.6 months. Two hundred and ninty-one of 418 women who were post-operatively followed up with the length of 11 months to 11 years, have experienced term dilivery or ,intra-uterine pregnancy, represented 69.6%. Eight cases have experienced ectopic pregnancy and 9 cases spontaneous abortion. The largest number of reversal clients were sterilized by the laparoscopic unipolar coagulation technique and the next largest group was sterilized by the laparoscopic banding technique, representing 59.8% and 28.9% respectively. The highest pregnancy rate, 80.9%, was shown in clients who had undergone laparoscopic banding technique while the lowest, 61.8%, was the group of laparoscopic bipolar coagulation. The most common site of the anastomosis was isthmic-ampullary portion and the next was isthmic-isthmic portion. The highest success rate, 77.8 %, was marked in the isthmic-isthmic anastomosis and the lowest was in the ampullary-ampullary anastomosis, representing 50.0%. A more than 60% of the clients became pregnant within 6 months of their reversal surgery, with the shortest interval being 1 month, the longest 39 months, and the mean 7.6 months. A large majority of the successful cases were pregnancy within 1 year of their reversal surgery, representing 82.1 %. The higher rate of pregnancy, 73.5%, was in the clients undergone reversal surgery within 36 months of their sterilization and the lower pregnancy rate, 64.1 %, was in the clients undergone reversal surgery longer than 37 months of their sterilization.