• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1596-1609
• /
• 2019

The fuel rod performance has great importance for the safety and economy of an operating reactor. The fuel rod performance analysis code, which considers the thermal-mechanical response and irradiation effects of fuel rod, is usually developed in order to predict fuel rod performance accurately. The FRIPAC (${\underline{F}}uel$ ${\underline{R}}od$ ${\underline{I}}ntegral$ ${\underline{P}}erformance$ ${\underline{A}}nalysis$ ${\underline{C}}ode$) is such a fuel rod performance analysis code that has been developed recently by China Nuclear Power Technology Research Institute Co. Ltd. The code aims at the computational simulation of the Pressurized Water Reactor fuel rod behavior for both steady-state and power ramp condition. A brief overview of FRIPAC is presented including the computational framework and the main behavioral models. Validation of the code is also presented and it focuses on the fuel rod behavior including fuel center temperature, fission gas release, rod internal pressure/internal void volume, cladding outer diameter and cladding corrosion thickness. The validation is based on experimental data from several international projects. The validation results indicate that FRIPAC is an accurate and reliable fuel rod performance analysis code because of the satisfactory comparison results between the experimental measurements and the code predictions.

• Journal of the Korean Society of Visualization
• /
• v.19 no.1
• /
• pp.68-73
• /
• 2021

In this study, the detection of rubber o-ring defects was carried out using k-fold cross validation and Support Vector Machine (SVM) algorithm. The data process was carried out in 3 steps. First, we proceeded with a frame alignment to eliminate unnecessary regions in the learning and secondly, we applied gray-scale changes for computational reduction. Finally, data processing was carried out using image augmentation to prevent data overfitting. After processing data, SVM algorithm was used to obtain normal and defect detection accuracy. In addition, we applied the SVM algorithm through the k-fold cross validation method to compare the classification accuracy. As a result, we obtain results that show better performance by applying the k-fold cross validation method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.2 s.17
• /
• pp.57-64
• /
• 2004

A Requirement statement validation process is suggested which was established and applied to the rolling stock development project of the Korean Railway Research Institute. The validation process includes team organization, selection of validation criteria, development of validation template, education of team members, validation, construction of database and management of requirement change. Many defects in the specification of requirement were found to be associated with the problem of non-uniqueness, describing solution instead of problem, ambiguity and redundancy. This paper described detailed activities at each step of the validation process and lessons learned from these activities.

• Journal of the Korean Society of Safety
• /
• v.39 no.3
• /
• pp.50-59
• /
• 2024

In recent years, building architecture has become increasingly complex and larger in scale to accommodate many people. In densely populated facilities, the interiors are becoming more intricate and high-rise, with narrow corridors, hallways, and stairs. This poses challenges for evacuating occupants in case of emergencies such as fires, making it crucial to assess the evacuation safety in advance. In evacuation safety research, there are significant limitations to theoretical studies owing to their association with crowd behavior and human evacuation characteristics, as well as the risks associated with experiments involving human participants. Consequently, evacuation experiments conducted using simulation-based methodologies are gaining recognition worldwide. However, crowd simulations face validation difficulties because of variations in crowd movement and evacuation characteristics across different cases and scenarios, as well as the challenge of accurately reflecting human characteristics during evacuations. In this study, we investigated validation methods for evacuation simulations using the SAFEGUARD validation data set (SGVDS) provided by the University of Greenwich, UK. The SGVDS collects data on crowd evacuations through actual evacuation tests conducted on ColorLine's large RO-PAX ferry and Royal Caribbean International's cruise ships. The accuracy of the crowd simulations can be validated by comparing SGVDS and crowd simulation results. This study will contribute to the development of highly accurate crowd simulations by verifying various crowd simulations.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.973-976
• /
• 2009

This paper shows that the method of validation on performance-based design is studied on geotechnical conditions. In the design of structure foundation are studied the evaluation items on this matter.

• Toxicological Research
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2009

Validation specifies and coordinates all relevant activities to ensure compliance with good laboratory practices (GLP) according to suitable international standards. This includes validation activities of past, present and future for the best possible actions to ensure the integrity of non-clinical laboratory data. Recently, validation has become increasingly important, not only in good manufacturing practice (GMP) institutions but also in GLP facilities. In accordance with the guideline for GLP regulations, all equipments used to generate, measure, or assess data should undergo validation to ensure that this equipment is of appropriate design and capacity and that it will consistently function as intended. Therefore, the implantation of validation processes is considered to be an essential step in a global institution. This review describes the procedures and documentations required for validation of GLP. It introduces basic elements such as the validation master plan, risk assessment, gap analysis, design qualification, installation qualification, operational qualification, performance qualification, calibration, traceability, and revalidation.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.1071-1072
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.12
• /
• pp.3926-3937
• /
• 1996

In recent years there has been increased interest in the continuum model associated with the solidification of binary mixtures. A review of the literature, however, shows that the model verification was not sufficient or only qualitative. Present work is conducted for the reassessment of continuum model on the solidification problems of binary mixtures widely used for model validation. In spite of using the same continuum model, the results do not agree well with those of Incropera and co-workers which are benchmark problems typically used for validation of binary mixture solidification. Inferring from the agreement of present results with the analytic, experimental and other model's numerical results, this discrepancy seems to be caused by numerical errors in applying continuum model developed by Incropera and co-workers, not by the model itself. Careful examination should be preceded before selecting validation problems.

• Korean Journal of Childcare and Education
• /
• v.19 no.1
• /
• pp.43-67
• /
• 2023

Objective: This study aimed to validate a scale which could measure the correct mediation behavior of parents for their children's smart media use. Methods: The subjects were comprised of 514 parents of 5-year-old children. The collected data were analyzed using Jasp. Results: First, in the primary validation process, a total of 19 items and five factors were extracted through exploratory factor analysis. Through secondary validation process, we found that the scale model satisfies the goodness-of-fit evaluation criteria and is valid through confirmatory factor analysis. The newly constructed parents smart media mediation scale in early childhood emerged as a valid and reliable scale. Second, it was found that the more parents pursue 'active mediation', 'instructive mediation', and 'supervision', and avoid 'co-viewing', and 'technical restrictions', the more they had a positive effect on children's smart media usage capabilities. Third, the total score of smart media mediation for young children's parents was found to significantly differentiate young children's smart media overdependence, and self-regulation. Conclusion/Implications: The final smart media mediation scale for young children's parents was composed of 19 items, with five factors: 'co-viewing', 'instructive mediation', 'technical restrictions', 'active mediation', and 'supervision'.

• Korean Journal of Pharmacognosy
• /
• v.51 no.1
• /
• pp.78-85
• /
• 2020

In this study, we shortly introduced the HPLC method validation guideline for the analysis of functional food which was released from the Ministry of Food and Drug Safety of Korea in Dec 2018. The HPLC method validation was performed through the aforementioned HPLC method validation guideline in order to quantitate scopoletin content from the hot-water extract powder of Artemisia annua Linné. The HPLC method was validated by evaluating specificity, accuracy, precision, limit of quantitation and linearity. All parameters were in the suitable ranges which are designated in the guideline, which indicated the current HPLC method is reliable to quantitate the scopoletin content from the hot-water extract of A. annua.