• Korean Journal of Optics and Photonics
• /
• v.33 no.1
• /
• pp.22-27
• /
• 2022

We fabricate a polarization-independent dielectric multilayer thin-film diffraction grating for a spectral-beam-combining (SBC) system with a simple grating structure and low aspect ratio. Due to the refractive index and thickness error of the manufactured thin films, the diffraction efficiency of the fabricated diffraction grating was lower than that of the design. The causes of the errors were analyzed, and it was confirmed through simulation that diffraction efficiency could be compensated through an additional coating on the manufactured diffraction grating. As a result of sputtering an additional Ta₂O₅ layer on a fabricated diffraction grating, the diffraction efficiency was corrected and a maximum 91.7% of polarization-independent diffraction efficiency was obtained.

• Journal of the Korean Ceramic Society
• /
• v.48 no.1
• /
• pp.110-115
• /
• 2011

$Gd_2O_3$-doped $CeO_2$ (GDC) and $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3$ (LSCF) composite cathode materials were prepared in order to be applied to intermediate-temperature solid oxide fuel cells. The electrochemical polarization was evaluated using ac impedance spectroscopy involving geometric restriction at the interface between an ionic electrolyte and a mixed-conducting cathode. In order to optimize the cathode composites applicable to a GDC electrolyte, the cathode composites were evaluated in terms of polarization losses with regard to a given electrolyte, i.e., GDC electrolyte. The polarization increased significantly with decreasing temperature and was critically dependent on the compositions of the composite cathodes. The optimized cathode composite was found to consist of GDC 50 wt% and LSCF 50 wt%; the corresponding normalized polarization loss was calculated to be 0.64 at $650^{\circ}C$.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.3
• /
• pp.136-142
• /
• 2011

$Li_4Ti_5O_{12}$ is prepared through a solid-state reaction between $Li_2CO_3$ and anatase $TiO_2$ for applications in lithium-ion batteries. The rate capability is measured and the electrode polarization is analyzed through the galvanostatic intermittent titration technique (GITT). The rate characteristics and electrode polarization are highly sensitive to the amount of carbon loading. Polarization of the $Li_4Ti_5O_{12}$ electrode continuously increases as the reaction proceeds in both the charge and discharge processes. This relation indicates that both electron conduction and lithium diffusion are significant factors in the polarization of the electrode. The transition metal (Cu, Ni, Fe) ion added during the synthesis of $Li_4Ti_5O_{12}$ for improving the electrical conductivity also greatly enhances the rate capability.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.973-976
• /
• 2000

This paper proposes a new polarization diversity scheme for OPFDM (Orthogonal Polarization and Frequency Division Multiplexing). OPFDM is an extension of OFDM (Orthogonal Frequency Division Multiplexing) in conjunction with polarization multiplexing in order to ensure the orthogonality amongst subcarriers. Since OPFDM uses two orthogonally polarized channels, it can easily employ the polarization diversity. In order to get the diversity gain effectively in a frequency selective fading channel, the proposed scheme combines the signals in subcarrier-by-subcarrier basis. The computer simulation results confirm that the proposed scheme is superior to conventional one in the two orthogonally polarized two-ray Rayleigh fading channels with cross-talk between the two channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1622-1630
• /
• 2015

In this study, we used EBG(electromagnetic band gap) reflector to change bi-directional radiation of circular polarization into uni-directional radiation of equiangular spiral antenna. When the height of spiral arm from EBG reflector is 0.07 wavelength of the lowest operating frequency, the axial ratio of the circular polarization was deteriorated. In this paper, we analyzed the magnitude and the time phase difference of $E_{\theta},E_{\phi}$ that generates right hand circle polarization that is co-polarization at +z direction and proposed the improving condition for axial ratio at all related frequency range. As a result, we obtained that the axial ratio was below 3[dB] at range of 3 ~ 10[dB], the gain was improved about 3[dB] with comparison to bi-directional radiation at free space, and $S_{11}$ was below -10[dB] at all related frequency range.

• Korean Journal of Remote Sensing
• /
• v.36 no.4
• /
• pp.535-544
• /
• 2020

In synthetic aperture radar (SAR) based ship detection application, false alarms frequently occur due to various noises caused by the radar imaging process. Among them, radio frequency interference (RFI) and azimuth smearing produce substantial false alarms; the latter also yields longer length estimation of ships than the true length. These two noises are prominent at cross-polarization and relatively weak at co-polarization. However, in general, the cross-polarization data are suitable for ship detection, because the radar backscatter from background sea surface is much less in comparison with the co-polarization backscatter, i.e., higher ship-sea image contrast. In order to improve the ship detection accuracy further, the RFI and azimuth smearing need to be mitigated. In the present letter, Sentinel-1 VV- and VH-polarization intensity data are used to show a novel technique of removing these noises. In this method, median image intensities of noises and background sea surface are calculated to yield arithmetic tendency. A band-math formula is then designed to replace the intensities of noise pixels in VH-polarization with adjusted VV-polarization intensity pixels that are less affected by the noises. To verify the proposed method, the adaptive threshold method (ATM) with a sliding window was used for ship detection, and the results showed that the 74.39% of RFI false alarms are removed and 92.27% false alarms of azimuth smearing are removed.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.31-34
• /
• 2006

Laboratory experiment of polarimetric GPR measurement was conducted for the purpose of estimating subsurface inhomogeneity. Tow realization of inhomogeneous subsurface media were made by burying stone objects of different dimensions in homogeneous dry sand. Polarization ratio of cross polarization to co polarization data were examined to find their obviously distinguishable behavior.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.839-846
• /
• 1996

Epitaxial (La, Sr)$CoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$by pulsed laser deposition for ferroelectric field effect transistor. Epitaxial $LaCoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$ heterostructures exhibited 70$\mu C/cm^2$ and 17 $\mu C/cm^2$at a positively and negatively poled states, respectively. On the other hand, epitaxial (La, Sr)$CoO_3/Pb(Zr,\;Ti)O_3/LaCoO_3$heterostructures show the remnant polarization states opposite to the $LaCoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$ heterostructures. This indicates that the interface between (La, Sr)$CoO_3$ (LSCO) and $Pb(Zr, Ti)O_3(PZT)$ layers affects the asymmetric polarization remanence through electrochemical nature. The resistivity of $LaCoO_3$ (LCO) layer was found to be dependent on an ambient oxygen, primarily the ambient oxygen pressure during deposition. The resistivity of the LCO layer varied in the range of 0.1-100 $\Omega$cm. It is suggested that, with an appropriate resistivity of the LCO layer, the LCO/PZT/LSCO heterostructure can be used as the ferroelectric field effect transistor.

• Corrosion Science and Technology
• /
• v.13 no.4
• /
• pp.152-156
• /
• 2014

This study was undertaken to examine the electrochemical corrosion properties of an $Co_{80}Nb_{10}B_{10}$ and $Co_{82}Nb_8B_{10}$ amorphous alloys prepared by melt-spinning method under various conditions. The potentiodynamic polarization responses at various levels of pH (pH 2, pH 7, pH 12) showed that the corrosion current rate of $Co_{80}Nb_{10}B_{10}$ alloy is lower than that of $Co_{82}Nb_8B_{10}$ alloy in all levels of pH, implying the general corrosion resistance of the alloy with higher Nb content is better than that with higher Co content. The pitting potential of $Co_{80}Nb_{10}B_{10}$ alloy was also better than that of $Co_{82}Nb_8B_{10}$, evidenced by the higher pitting potential. Nb is thought to be effective in increasing the protectiveness of the passive film and hence to improve the corrosion resistance of Co-Nb-B alloys.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1250-1256
• /
• 2017

This paper proposes the design of microstrip patch antennas for dual-band polarization adjustment. The antenna has a multi-layer structure for dual-band operation, and each layer contains a resonating patch with surrounding strips separated into two parts. The antenna polarization is adjusted by varying the separated positions of the strips, while fixing other design parameters. To demonstrate the feasibility, an antenna sample with right-hand circular polarization is fabricated, and its antenna characteristics are measured in a full anechoic chamber. The operating principle of polarization adjustment in the dual frequency bands is also verified by observing near electromagnetic fields and the magnetic surface current density around the antenna.