• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.141-142
• /
• 2015

전기전자 기술발달에 따라 여러 가지 형태의 전기전자 부품이 많이 사용되고 있다. 이러한 전기전자 부품은 트랜지스터, Op Amp 등의 능동소자와 저항, 캐패시터, 리액터 등의 수동소자로 구분할 수 있다. 능동소자의 경우에는 사용용도에 따라 대부분 제조사에서 명확한 사양을 제공하지만, 수동소자의 경우는 명확한 사양을 제공하지 못하는 부품들도 있다. 정격범위를 명확히 제시하지 못하는 소자에 대표적으로 리액터가 있으며, 경우에 따라 정격에 미달하는 수준의 제품도 유통되고 있는 실정이다. 본 논문은 리액터 설계사양에 해당하는 철심의 자속밀도에 대한 실제 제품의 자속밀도포화 여부를 확인할 수 있는 기기의 동작설명과 그 실험결과를 제시한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.87-93
• /
• 2019

We discuss the design of a radiometer using a millimeterwave(Ka-band) seeker. We applied a total power radiometer, thus the radiometer is composed of a IF-drive amp, band-pass filter, detector and an Op-amp additionally. As a radiometer measure a radiated signal of an object which is noise-like, a radiometer is easily affected by the variance of system temperature. To mitigate an adverse effect, we propose a compensation method in a radiometer without brightmess temperature compensation circuits. Through some experiments such like a distinction a target and the background, we have verified that the designed radiometer system has distingushed a car from the ground completely.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.248-251
• /
• 2017

In this paper, The proposed board is developed by EMI compliant Dash Camera with $360^{\circ}$ omni angle. The proposed board is designed by designing DM and CM input noise reduction circuit and applying active EMI filter coupling circuit. The DM and CM input noise reduction circuit design uses a differential op amp circuit to obtain the DM noise coupled to the input signal via the parasitic capacitance(CP). In order to simplify the circuit by applying the active EMI filter coupling circuit, a noise separator is installed to compensate the noise of the EMI source to compensate the CM and DM active filter simultaneously. In order to evaluate the performance of the board for the proposed EMI response, an authorized accreditation body has confirmed that the electromagnetic certification standard for each frequency band is satisfied.

• Korean Journal of Acupuncture
• /
• v.31 no.4
• /
• pp.218-224
• /
• 2014

Objectives : Zizyphus jujuba fruits(ZJF), a traditional Korean medicine has various biological activities such as anti-inflammatory, anti-oxidative and neuro-protective effects. However, it is still unclear whether ZJF has any biological effect on anti-aging. In this study, we examined the effect of ZJF on lifespan and thermal stress in C. elegans. Methods and Results : ZJF water extracts were fermented for 7 days(F7-ZJF) and 14 days(F14-ZJF) by Laetiporus sulphureus to increase secondary metabolites such as aglycone of flavonoids and terpenoids. In the lifespan assay, ZJF water extracts and fermented ZJF were treated on the agar medium plate with age synchronized egg stage of C. elegans. Treatment of F7-ZJF-$200{\mu}g/mL$ with OP-50 E. coli and F14-ZJF-$200{\mu}g/mL$ with OP-50 E. coli significantly increased life span of C. elegans(N2) at thermal stress condition of $25^{\circ}C$. Moreover mRNA levels of lifespan associated HSP 16.1, HSP 70, and HSF-1 were increased at thermal stress condition of $25^{\circ}C$. However, in the equilibration temperature of $20^{\circ}C$ after stress condition of $35^{\circ}C$ for 2 hr, F-14-ZJF-$200{\mu}g/mL$ treatment decreased the levels of heat shock protein in hsp16.2/GFP C. elegans. Conclusions : Our study indicates that prolong role of fermented-ZJF in C. elegans is mediated by control HSPs production.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.109-114
• /
• 2023

In this paper, a 2-channel Image-Reject receiver using a 65-nm CMOS process is presented for Ka-band compact radars. The designed receiver consists of Low-Noise Amplifier (LNA), IQ mixer, and Analog Baseband (ABB). ABB includes a complex filter in order to suppress unwanted images, and the variable gain amplifiers (VGAs) in RF block and ABB have gain tuning range from 4.5-56 dB for wide dynamic range. The gain of the receiver is controlled by on-chip SPI controllers. The receiver has noise figure of <15 dB, OP1dB of >4 dBm, image rejection ratio of >30 dB, and channel isolation of >45 dB at the voltage gain of 36 dB, in the Ka-band target frequency. The receiver consumes 420 mA at 1.2 V supply with die area of 4000×1600 ㎛.

• Biomedical Science Letters
• /
• v.10 no.3
• /
• pp.299-303
• /
• 2004

The number of acute drug intoxication who visiting to emergency department which is located near urban and rural area concomitantly is inclined to increase slightly, The purpose of this study was the investigation of methods and strategies of management of acute drug intoxication in emergency department Clinical trials were done on 92 cases of acute drug intoxication visiting to Emergency Department of Chungnam National University Hospital during 4 months from April to July 2003. 1. The total number of acute drug intoxication during this period was 92 patients, which presented 0.95％ of all the emergency department visiting patients during the study. The intentional ingestions were observed in 84 cases (91.3％). 2. The maximal point of age distribution was 4th decade. The number of that was 21 cases (22.8％). 3. The number of patients who had ingested benzodiazepines and doxylamine succinates was 26 cases (28.2％), organophosphorus was 20 (21.7％), paraquat was 10 (10.8％), others were 36 (39.3％). 4. Five kinds of po1ydrug ingestion was observed in 3 cases, four kinds was observed in 3, three kinds was observed in 5 and co-ingestion of alcohol was observed in 28 cases (30.4％). 5. The mortality was occurred in 4 cases, 2 of them were caused by paraquat, 1 of them was caused by organophosphorus (OP), 1 of them was caused by acetic acid. 6. The gastric larvage as a mean of treatment modality was done in 57 cases (61.9％). The use of activated charcoal was done in 8 (8.69％). The maintenance of tracheal intubation was done in 6 (6.52％). 7. The mean observational period in emergency department was 8 hours 42 minutes in benzodiazepine and doxylamine succinate group, 21 hours 46 minutes in OP, 20 hours 39 minutes in other germicidal except OP, 23 hours 9 minutes in paraquat group. Without a drug information and intoxication center in Korea, We should minimize the exhaustion of medical resources by establishment of determinant criteria which can be seen in relatively less-complicated cases of acute drug intoxication. Thus, we should consider the introduction of simple toxicology treatment protocol and toxicologic observation unit in emergency department as possible means to reduce economical and social burdens.

• Korean Journal of Food Science and Technology
• /
• v.47 no.4
• /
• pp.486-491
• /
• 2015

The potential of applying cold plasma (CP) treatments to improve microbiological safety of powdered products has been investigated using infant milk powder (IMP) and onion powder (OP). Among the different kinds of CP-forming gases, He-$O_2$ (99.8:0.2) gas mixture and He gas were most effective in reducing the number of Cronobacter sakazakii in IMP and Bacillus cereus spores in OP, respectively. C. sakazakii counts in IMP decreased by $0.9{\pm}0.1{\log}\;CFU/g$ after CP treatment, and the extent of C. sakazakii inhibition increased in a time-dependent manner. CP treatment at 900 W for 20 min reduced the number of B. cereus spores by ~0.4 log spores/g. Treatments that integrated CP with microwave (MW-CP treatment) as well as those that integrated CP with heat and microwave (H-MW-CP treatment) resulted in a 90% reduction in the number of spores in OP. Thus, CP treatments demonstrated potential for decontaminating foodborne pathogens from powdered products, in combination with heat for improved effect.

• The Korean Journal of Pharmacology
• /
• v.20 no.2
• /
• pp.49-57
• /
• 1984

The exocrine pancreatic secretion is controlled mainly by gastrointestinal hormones as well as cholinergic nerves. The adrenergic influence on exocrine pancreas is thought not to he important and the evidences supporting this contention are still contradictory. In an effort to elucidate the adrenergic influence on the exocrine pancreas, we have determined the amylase release from pancreatic slices of rats treated with adrenergic drugs. The albino rats of either sex, weighing $60{\sim}80\;g$, were decapitated and the uncinate pancreata were isolated and incubated in screw top vials containing 2 ml krebs-Ringer bicarbonate buffer solution gassed with 95% $O_2$ and 5% $CO_2$. These vials were shaken continuously in a waterbath maintained at $37^{circ}C$, and enzyme release was stimulated with acetylcholine$(10^{-5}M)$. For chronic treatment methoxamine$(an\;{\alpha}-adrenergic\;agonist,\;5\;mg/kg)$, isoproterenol (a\;{\beta}-adrenergic\;agonist,\;10\;mg/kg) and reserpine (0.5 mg/kg) along with cholecystokinin octapeptide$(CCK-op,\;2{\mu}g/kg)$ were given i.p. in rats daily for 3, 5, 7, 9 or 12 days. For acute experiment these drugs were added directly to the incubation medium in a concentration of $10^{-5}M$ except CCK-OP $(10^{-9}M)$. The results are summarized as follows. 1) The addition of methoxamine, isoproterenol or reserpine to the incubation medium containing pancreatic slices augmented the release of amylase induced by acetylcholine and among them the effect of isoproterenol was most prominent. 2) Chronic treatment of methoxamine or reserpine caused enhancement of acetylcholine response in amylase release from pancreatic slice throughout the experimental period, but the amylase release was less than that of control by 12 days isoproterenol treatment. 3) In the pancreatic slices obtained from 12 days treatment of CCK-OP, the amylae release responding to acetylcholine was enhanced. By these finding it is suggested that methoxamine, isoproterenol and reserpine had marked influence on the exocrine pancreatic functions in rats and that these effects are due to their inherent actions rather than sympathetic nerve or adrenergic receptor function.

• The Journal of Korea Robotics Society
• /
• v.8 no.2
• /
• pp.92-103
• /
• 2013

Humanoid robot is the most intimate robot platform suitable for human interaction and services. Biped walking is its basic locomotion method, which is performed with combination of joint actuator's rotations in the lower extremity. The present work employs humanoid robot simulator and numerical optimization method to generate optimal joint trajectories for biped walking. The simulator is developed with Matlab based on the robot structure constructed with the Denavit-Hartenberg (DH) convention. Particle swarm optimization method minimizes the cost function for biped walking associated with performance index such as altitude trajectory of clearance foot and stability index concerning zero moment point (ZMP) trajectory. In this paper, instead of checking whether ZMP's position is inside the stable region or not, reference ZMP trajectory is approximately configured with feature points by which piece-wise linear trajectory can be drawn, and difference of reference ZMP and actual one at each sampling time is added to the cost function. The optimized joint trajectories realize three phases of stable gait including initial, periodic, and final steps. For validation of the proposed approach, a small-sized humanoid robot named DARwIn-OP is commanded to walk with the optimized joint trajectories, and the walking result is successful.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.30-37
• /
• 1996

On-line process control equipment for CO$_{2}$ laser cutting is not available for industrial applications. The major part of the industrial laser cutting machines are adjusted off-line by highly educated engineers. The quality inspection of the sample is visual and referred to different quality scales. Due to the lack of automation the potential laser users hesitate to implement the cutting method. The first step toward an automation of the process is the development of a process monitoring system and the research is cincentrated on the area of on-line quality monitoring during CO$_{2}$ laser cutting. The method is based on the detection of the emitted light from the cutting front by photo diode. The developed monitoring system consists of the OP Amplifier, A/D convertor, power supply and PC. The signal from the photo diode has been undertaken from Fourier analysis and statistical analysis with real time. The photograph of striation pattern was taken by metallurgical microscope. As a result, it is possible to predict the striation pattern according to the beam traveling speed.