• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.284-289
• /
• 2003

The narrow band-averaged transmissivity of $CO_2-H_2O$ mixtures is expressed by multiplying the transmissivities of $CO_2$ and $H_2O$. Applying the multiplication property of narrow band transmissivities for gas mixtures of $CO_2-H_2O$, the number of gray gases, required for accurate representation of the absorption characteristics by using the narrow band based WSGGM, is significantly increased. To reduce the computational loads by reducing the number of gray gases, we propose a gray gas regrouping process where the gray gases used for the WSGGM are regrouped into a specified number of groups according to the magnitudes of absorption coefficients. To evaluate the proposed WSGGM for gas mixtures, the radiative transfer problems through three-dimensional gas media are considered. The radiative source terms and the radiative heat fluxes obtained by using the proposed method are fairly well compared to those obtained by using the SNB model. The regrouping technique results in an excellent computational efficiency with minor loss of accuracy.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 학술발표대회 논문집 제19권 2호
• /
• pp.235-238
• /
• 2000

Current diesel engines are usually equipped with turbochargers for improving fuel economy as well as meeting more stringent emission regulations. These turbochargers usually cause noise problems because they spins vey high such as 100,000 to 200,000 rpm, These noises are largely divided into whistle and whine noises. The frequency of whistle noise corresponds to their rotation speed, and the frequency of whine noise does to the multiplication of their rotation speed and the number of compressor blades. Turbocharger manufacturers developed a special type of compressor, effectively compressing air sucked from a duct; Recirculation Compressor Cover (RCC) or Map Width Enhancement (MWE). This special structure improves turbocharger's capability by expanding compressor's working area, but it seriously causes a noise problem, whine noise. There were many trials to surpress the noise occurred inside a compressor such as modification of a compressor, noise baffles or secondary measurements. However, it was currently concluded that the whine noise caused by the special compressor can not be reduced to that done by a standard compressor, and the strength difference of whine noises between the two compressors is not negligible. Thus, the standard compressor is decided to be applied to a newly developing heavy-duty diesel engine in order to resolve the turbocharger noise problem with a stiffened suction duct directly connected to a compressor.

• 한국정보통신학회논문지
• /
• 제25권1호
• /
• pp.20-26
• /
• 2021

오늘날의 시스템들은 더 빠른 실행 속도와 더 적은 전력 소모를 위해 하드웨어와 소프트웨어 요소를 함께 포함하고 있다. 기존 하드웨어 및 소프트웨어 공동 설계에서 소프트웨어와 하드웨어의 비율은 설계자의 경험적 지식에 의해 나뉘었다. 설계자들은 반복적으로 가속기와 응용 프로그램을 재구성하고 시뮬레이션하며 최적의 결과를 찾는다. 설계를 변경하며 반복적으로 시뮬레이션하는 것은 시간이 많이 소모되는 일이다. 본 논문에서는 에너지 효율적인 FPGA 가속기 설계를 위한 하드웨어 및 소프트웨어 공동 설계 플랫폼을 제안한다. 제안하는 플랫폼은 가속기를 구성하는 주요 성분을 변수화해 응용 프로그램 코드와 하드웨어 코드를 자동으로 생성하여 설계자가 적절한 하드웨어 비율을 쉽게 찾을 수 있도록 한다. 공동 설계 플랫폼은 Xilinx Alveo U200 FPGA가 탑재된 서버에서 Vitis 플랫폼을 기반으로 동작한다. 공동 설계 플랫폼을 통해 1000개의 행을 가지는 두 행렬의 곱셈 연산 가속기를 최적화한 결과 응용프로그램보다 실행 시간이 90.7%, 전력 소모가 56.3% 감소하였다.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1708-1714
• /
• 2019

The purpose of the critical evaluation of the spent fuel pool (SFP) is to verify that the maximum effective multiplication factor ($K_{eff}$) is less than the critical safety limit at 100% stored condition of the spent fuel with the maximum reactivity. At nuclear power plants, the storage standard of spent fuel, ie, the loading curve, is established to prevent criticality from being generated in SFP. Here, the loading curve refers to a graph showing the minimum discharged burnup versus the initial enrichment of spent fuel. Recently, US NRC proposed the new critical safety assessment guideline (DSS-ISG-2010-01, Revision 0) of PWR SFPs and most of utilities in US is following it. Of course, the licensed criterion of the maximum effective multiplication factor of SFP remains unchanged and it should be less than 0.95 from the 95% probability and the 95% confidence level. However, the new guideline is including the new evaluation methodologies like the application of the axial burnup profile, the validation of depletion and criticality code, and trend analysis. Among the new evaluation methodologies, the most important factor that affects $K_{eff}$ is the axial burnup profile of spent fuel. US NRC recommends to consider the axial burnup profiles presented in NUREG-6801 in criticality analysis. In this paper, criticality effect was evaluated considering three profiles, respectively: i) Axial burnup profiles presented in NUREG-6801. ii) Representative PWR axial burnup profile. iii) Uniform axial burnup profile. As the result, the case applying the axial burnup profiles presented in NUREG-6801 showed the highest $K_{eff}$ among three cases. Therefore, we need to introduce a new methodology because it can be issued if the axial burnup profiles presented in NUREG/CR-6801 are applied to the domestic nuclear power plants without any other consideration.

• 대한기계학회논문집B
• /
• 제27권2호
• /
• pp.227-235
• /
• 2003

The WSGG-based narrow band model was employed to solve the radiative transfer equations along isothermal and non-isothermal paths through $CO_2-H_2O-N_2$ gas mixtures at 1 atm. When the WSGGM is applied for arbitrary gas mixtures by considering the multiplication property of transmissivity in overlapping bands, the number of gray gases is significantly increased. To reduce the computation time, three different regrouping methods for the gray gases are tested in obtaining the mean absorption coefficient for each gray gas group. Among them, the regrouping method by minimizing the regrouping error shows the best results. For the isothermal media, 10 gray gases show fairly good agreement with the results by statistical narrow band(SNB) model which are regarded as reference solutions. For non-isothermal media, 20 gray gases show good agreement with reference solutions.

• 생물환경조절학회지
• /
• 제26권4호
• /
• pp.268-275
• /
• 2017

광도와 온도 같은 환경 요인에 의해 광합성 속도가 변화하기도 하며, 생육 시기에 따른 광합성 효율의 변화가 수반되기도 한다. 본 연구에서는 흑로메인 상추(Lactuca sativa L., Asia Heuk romaine)를 이용하여 광도와 온도, 생육 시기에 따른 군락 광합성 속도를 표현하는 두 모델을 구축하고 비교하는 것을 목표로 하였다. 군락 광합성은 정식 후 4, 7, 14, 21, 28 일차 상추를 아크릴 챔버($1.0{\times}0.8{\times}0.5m$)에 넣어 측정하였으며, 이 때 챔버 내부의 온도는 $19^{\circ}C$에서 $28^{\circ}C$까지 변화시켰고 광원은 LED를 이용하여 50에서 $500{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$까지 변화시키며 실험하였다. 챔버 내부의 초기 이산화탄소 농도는 $2,000{\mu}mol{\cdot}mol^{-1}$로 설정하였으며, 시간에 따른 이산화탄소 농도의 변화율을 이용하여 군락 광합성 속도를 계산하였다. 각 환경요인을 표현하는 3개 식을 곱하여 만든 단순곱 모델을 구성하였다. 이와 동시에 온도와 생육 시기에 따라 변화하는 광화학 이용효율과 카르복실화 컨덕턴스, 호흡에 의한 이산화탄소 발생 속도를 포함하는 수정된 직각쌍곡선 모델을 구성하여 단순곱 모델과 비교하였다. 검증 결과 단순곱 모델은 0.849의 $R^2$ 값을 나타내었으며, 수정된 직각쌍곡선 모델은 0.861의 $R^2$ 값을 나타내었다. 수정된 직각쌍곡선 모델이 단순곱 모델에 비해 환경 요인(광도, 온도), 생육 요인(생육 시기)에 따른 군락 광합성 속도를 표현하는 데 더욱 적합한 모델인 것으로 판단하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.245-250
• /
• 1992

In this paper, we present a nev algorithm for the fast computation of the discrete cosine transform(DCT). This algorithm consists of the three dimensional prime factor-decomposed algorithm(PFA) and three dimensional common factor-decomposed algorithm(CFA). We can compute N-point DCT for the number N decomposable Into three relative prime numbers using PFA and into three common numbers using CFA. We also show input and output index mapping for the three decomposition. it results in requiring fever multiplicaions than the previous algorithms. Particularly, for the large number N, it is more powerful in reducing the number of multiplication.

• 전기학회논문지
• /
• 제64권7호
• /
• pp.1026-1030
• /
• 2015

In this paper, we propose a signal processing board of an optical delay simulator for evaluating a long-range laser range finder and a laser target designator. We improved the accuracy by applying the clock multiplication and the correction of error gradient. To evaluate the performance of the proposed method, we implemented a prototype board and performed experiments. As a result, we implemented the optical delay simulator with resolution less than 0.7m in measuring distance 60km and a standard deviation of 0.041m. The PRF code detection logic and generation logic have a stability less than 0.03% and 0.08% compared to the NATO standard, respectively.

• 인포메이션 디스플레이
• /
• 제15권5호
• /
• pp.22-32
• /
• 2014

The current research intends to quantify the surround luminance effects on the shape of spatial luminance CSF and to propose an image quality evaluation method that is adaptive to both surround luminance and spatial frequency of a given stimulus. The proposed image quality method extends to a model called SQRI[8]. The non-linear behaviour of the HVS was taken into account by using CSF. This model can be defined as the square root integration of multiplication between display MTF and CSF. It is assumed that image quality can be determined by considering the MTF of the imaging system and the CSF of human observers. The CSF term in the original SQRI model was replaced by the surround adaptive CSF quantified in this study and it is divided by the Fourier transform of a given stimulus. A few limitations of the current work should be addressed and revised in the future study. First, more accurate model predictions can be achievable when the actual display MTF is measured and used instead of the approximation. Then, a further improvement to the model prediction accuracy can be made when chromatic adaptation of the HVS is taken into account[45-46].

• 미생물학회지
• /
• 제32권1호
• /
• pp.65-69
• /
• 1994

Synechococcus sp.의 cyanophage는 early, late viral function 모두 빛을 필요로 하는 것으로 나타났으며 증식 초기 2시간 동안 암처리한 경우 200%의 burst size를 나타내었다. Dark 상태에서의 Synechococcus sp.의 cyanophage증식은 대조군에 비해 11%의 burst size를 나타내었다. 광합성 억제제인 DCMU를 $10^{-6}$M로 처리했을 때 virus yield가 2%로 감소했으며 $10^{-4}$M의 CCCP는 cyanophage의 증식을 거의 중지시켰다. 또한 이러한 숙주세포의 광합성 의존도는 LPP-1, N-1과 AS-1보다는 크나 SM-1보다는 작은 것으로 나타났다.