• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.306.1-306.1
• /
• 2014

정보화 시대의 발전에 따라 점점 더 많은 정보를 더욱 빠르게 처리할 수 있는 기기들이 요구되고 있다. 메모리는 그 중에서 핵심적인 부품으로써 소자의 고집적화와 고속화가 계속 진행되면서 기존의 메모리 소자들은 집적화에서 그 한계에 도달하고 있다. 기존 소자들의 집적화의 한계를 극복하기 위하여 새로운 비휘발성 메모리 소자들이 제안되었다. 그 중 resistive switching random access memory(ReRAM)은 저항의 변화특성을 사용하는 메모리로 간단한 구조를 가지고 있기 때문에 집적화에 유리하다는 장점을 가지고 있다. 그 외에도 빠른 동작 속도와 낮은 전압에서의 동작이 가능하여 차세대 메모리로써 각광받고 있는 추세이다. 본 연구실에서는 이미 nitride 물질을 기반으로 한 여러 ReRAM 소자들을 제안해 왔다. 그 중 AlN-based ReRAM 소자는 빠른 동작 속도와 좋은 내구성을 보인 바 있다. 하지만 상업화를 위해서 해결해야 할 문제점들이 아직 존재하고 있다. 대표적으로 소자의 배열에서 각 소자의 균일한 동작이 보증되어야 하기 때문에 소자의 셋/리셋 전압의 산포를 줄이고 동작 전류 레벨을 낮추어야 할 필요성이 존재한다. 이러한 ReRAM의 이슈를 해결하기 위해, 본 실험에서는 기존의 AlN-based ReRAM 소자에 Ti를 도핑 방법을 이용하여 소자의 동작 전압 및 전류의 산포를 줄이기 위한 연구를 진행 하였다. 본 실험은 co-sputtering 방법을 이용하여 Ti가 도핑된 AlN을 저항변화 물질로 사용하여 그 특성을 살펴보았다. Ti의 도핑 효과로 소자의 신뢰성 향상 및 동작 전압의 감소 등의 효과를 얻을 수 있었다. 이는 nitride 기반 물질에서 Ti dopant에 의해 형성된 TiN의 효과로 설명된다. TiN는 metallic한 특성을 지니고 있기에 저항변화물질 내에서 일종의 metallic particle의 역할을 수행할 수 있다. 따라서 conducting path의 형성과정에서 이러한 particle 들이 전계를 유도하여 좀 더 균일한 set/reset 특성을 나타내게 된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.473.1-473.1
• /
• 2014

We report on the characteristics of Zr-doped $In_2O_3$ (IZrO) films prepared by DC-RF magnetron cosputtering of $In_2O_3$ and $ZrO_2$ targets for use as a transparent electrode for high efficient organic solar cells (OSCs). The effect of $ZrO_2$ doping power on electrical, optical, structural, and surface morphology of the IZrO film was investigated in detail. At optimized $ZrO_2$ RF power of 50 W, the IZrO film exhibited a low sheet resistance of 20.71 Ohm/square, and a high optical transmittance of 83.9 %. Furthermore, the OSC with the IZrO anode showed a good cell-performance: fill factor of 61.71 %, short circuit current (Jsc) of $8.484mA/cm^2$, open circuit voltage (Voc) of 0.593 V, and power conversion efficiency (PCE) of 3.106 %. In particular, the overall OSC characteristics of the cell with the IZrO anode were comparable to those of the OSC with the conventional Sn-doped $In_2O_3$ (FF of 65.03 %, Jsc of $8.833mA/cm^2$, Voc of 0.608 V, PCE of 3.495 %), demonstrating that the IZrO anode is a promising alternative to ITO anode in OSCs.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.1
• /
• pp.25-32
• /
• 2020

Generally, high-temperature, high-pressure, high-priced sintering equipment is used for diamond sintering, and conductivity is a problem for improving the surface modification of the sintered body. In this study, to improve the efficiency of diamond sintering, we identified a new process and material that can be sintered at low temperature, and attempted to develop a composite thin film that can be discharged by doping boron gas to improve the surface modification of the sintered body. Sintered bodies were sintered by mixing Si and two diamonds in different particle sizes based on CIP molding and HIP molding. In CVD deposition, CVD was performed using WC-Co cemented carbide using CH₄ and H₂ gas, and the specimen was made conductive using boron gas. According to the experimental results of the sintered body, as the Si content is increased, the Vickers hardness decreases drastically, and the values of tensile strength, Young's modulus and fracture toughness greatly increase. Conductive CVD deposited diamond was boron deposited and discharged. As the amount of boron added increased, the strength of diamond peaks decreased and crystallinity improved. In addition, considering the release processability, tool life and adhesion of the deposition surface according to the amount of boron added, the appropriate amount of boron can be confirmed. Therefore, by solving the method of low temperature sintering and conductivity problem, the possibility of solving the existing sintering and deposition problem is presented.

• Korean Journal of Materials Research
• /
• v.10 no.8
• /
• pp.525-531
• /
• 2000

Sb-doped tin oxide films were deposited on Cornig glass 1737 substrate by plasma enhanced chemical vapor deposition (PECVD) technique. The films deposited at different reaction parameters were then examined by using XRD and AFM. The relatively good crystalline thin film was formed at $450^{\circ}C$, input gas ratio R[$P_{SbCl}P_{{SnCl}_4}$]=1.12 and r.f. power 30W. The surface roughness of the film formed by PECVD compared to TCVD was more smooth. Higher concentration of Sb dopant, lower deposition temperature, and thinner thickness of deposited film led to de-creasing surface roughness of the formed thin films.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.611-615
• /
• 2013

Vanadium oxide ($VO_2$) and tungsten-doped vanadium oxide (W-$VO_2$) powder, well known as thermochromic materials, were prepared from vanadium pentoxide ($V_2O_5$) and oxalic acid dihydrate by hydrothermal and calcination process. The crystal structure and thermochromic property of samples were analyzed using FE-SEM, XRD, XPS, DSC, and UV-Vis-NIR spectroscopy. With increasing the doping amount of W, the phase transition temperature of W-$VO_2$ sample decreased from $70^{\circ}C$ to $42^{\circ}C$. When heating W-$VO_2$ sample above the phase transition temperature, the UV-Vis-NIR spectrum was not changed in the visible range and shifted towards a low transparency in the full name (NIR) region.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.65-68
• /
• 2012

Novel type $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ powders were prepared by a solid-state reaction of $Li_2CO_3$, $V_2O_3$, $WO_2$ and $MoO_2$ precursors in a nitrogen atmosphere containing 10 mol % hydrogen gas, and assessed as anode materials in lithium-ion batteries. The specific charge and discharge capacities of the $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ anodes were higher than those of the bare $Li_{1.1}V_{0.9}O_2$ anode. The cyclic efficiency of these anodes was approximately 73.3% at the first cycle, regardless of the presence of W and Mo doping. The composite anode, which was composed of $Li_{1.1}V_{0.75}W_{0.075}Mo_{0.075}O_2$ (20 wt %) and natural graphite (80 wt %), demonstrated reasonable specific capacity, high cyclic efficiency, and good cycling performance, even at high rates without capacity fading.

• Korean Journal of Materials Research
• /
• v.14 no.4
• /
• pp.270-275
• /
• 2004

Due to the luminescence by$ Er ^{ 3+}$ activator, Er-doped $LaPO_4$ powders can be applied for optical amplification materials. In this study, $LaPO_4$:Er nanoparticles were synthesized in solution system using a high-boiling coordinating solvent and their properties were investigated through various spectroscopic techniques. The nanoparticles were to take a single phase of monazite structure by a X-ray diffraction analysis and to have the 5-6 nm of particles size with narrow size distribution by a TEM. And it was confirmed by the EA and FT-IR analyses that the surfaces of nanoparticles are coordinated with the solvent molecules, which will possibly keep from agglomerating between LaPO$_4$:Er nanoparticles. In the emission spectrum of $LaPO_4$:Er nanoparticle at NIR region, on the other hand, it was measured that the emission intensity is very weak, which is due to the transition from $^4$$I_{(13/2)}$ to $^4$$I_{(15/2)}$ of $Er^{3+ }$ion. It was interpreted that the weak luminescence of $LaPO_4$:Er is originated from the hydroxyl groups adsorbed on the surfaces of the nanoparticles, because OH group acts as an efficient quencher for the $^4$$I_{(13/2)}$ \longrightarrow $^4$$I_{(15/2)}$ emission of $Er^{3+}$ activator. But the co-doping of Yb$^{3+}$ as a sensitizer in this nanoparticle results in the increase of the emission intensity at 1539 nm due to the effective energy transfer from $Yb^{3+}$ to $Er^{3+}$ . In addition, the synthesized nanoparticles exhibited good dispersibility with some polymers and effective luminescence at NIR region.n.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.8
• /
• pp.591-596
• /
• 2013

Indium Zinc Tin Oxide (IZTO) thin films were developed as an alternative to Indium Tin Oxide (ITO) thin films. ITO material which has been acknowledged with its low resistivity and optical transparency of 85-90% has been used as major transparent conducting oxide (TCO) materials. However, due to the limited source, high price, and instability problems at high temperature of indium, many researches has been focused on indium-saving TCO materials. Mason Group of Northwestern University was reported to expand the solubility limit up to 40% by co-doping with 1:1 ratio of $Zn^{+2}$ and $Sn^{+4}$ ions. In this study, the properties of IZTO thin films corresponding to Zn/Sn different ratio were investigated. In addition, the effect of substrate temperature variable to the structural, optical and electrical properties of IZTO thin films was investigated.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.182-188
• /
• 2013

Using a ceramic target ZnO:In with In doping concentration of 2%, hetero-junctions of n-ZnO:In/p-Si and p-ZnO:(In, N)/n-Si were fabricated by depositing Indium doped n - type ZnO (ZnO:In or IZO) and Indium-nitrogen co-doped p - type ZnO (ZnO:(In, N)) films on wafers of p-Si (100) and n-Si (100) by DC magnetron sputtering, respectively. These films with the best electrical and optical properties were then obtained. The micro-structural, optical and electrical properties of the n-type and p-type semiconductor thinfilms were characterized by X-ray diffraction (XRD), RBS, UV-vis; four-point probe resistance and room-temperature Hall effect measurements, respectively. Typical rectifying behaviors of p-n junction were observed by the current-voltage (I-V) measurement. It shows fairly good rectifying behavior with the fact that the ideality factor and the saturation current of diode are n=11.5, Is=1.5108.10-7 (A) for n-ZnO:In/p-Si hetero-jucntion; n=10.14, Is=3.2689.10-5 (A) for p-ZnO:(In, N)/n-Si, respectively. These results demonstrated the formation of a diode between n-type thin film and p-Si, as well as between p-type thin film and n-Si..

• Journal of Radiation Protection and Research
• /
• v.28 no.2
• /
• pp.87-95
• /
• 2003

The fabrication process and the structure of PIN semiconductor detectors have been designed optimally by simulation for doping concentration and width of p+ layer, impurities re-contribution due to annealing and the current distribution due to guard ring at the sliced edges. The characteristics to radiation response has been also simulated in terms of Monte Carlo Method. The device has been fabricated on n type, $400\;{\Omega}cm$, orientation <100>, Floating-Zone silicon wafer using the simulation results. The leakage current density of $0.7nA/cm^2/100{\mu}m$ is achieved by this process. The good linearity of radiation response to Cs-137 was kept within the exposure ranges between 5 mR/h and 25 R/h. This proposed process could be applied for fabricating a PIN semiconductor detector for measuring individual dose.