• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.169-175
• /
• 2022

Korea's construction industry has a shortage and aging of construction manpower, low productivity compared to other industries, and a high rate of industrial accidents. The Ministry of Land, Infrastructure and Transport is preparing for the 4th industrial revolution and is expanding investment in construction automation and innovative growth engines to improve productivity in the construction industry. In order for new technologies to be utilized in the road construction field, the accuracy of the technologies and the applicability of each type of work must be evaluated. In this study, the accuracy of the mobile mapping system was tried to verify based on the relevant work regulations, and to suggest the applicability of the mobile mapping system to high-speed driving tracks through data acquisition and analysis on road construction sites. The accuracy of the equipment used in the study was verified in accordance with the relevant work regulations, and the possibility of applying the mobile mapping system used for the study to road construction surveying was presented with a maximum error of less than 10cm in the horizontal and vertical directions. In addition, the possibility of utilizing the road construction survey using the mobile mapping system was presented through comparison with the existing method for data acquisition time for construction surveying, production of construction status survey results, and calculation of heatmap and earthworks. In the future, the use of construction status surveying of the mobile mapping system will greatly improve the efficiency of construction work.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.177-185
• /
• 2022

A method of restoring the occluded area was proposed by referring to images taken with the same types of sensors on high-resolution optical satellite images through deep learning. For the natural continuity of the simulated image with the occlusion region and the surrounding image while maintaining the pixel distribution of the original image as much as possible in the patch segmentation image, CycleGAN (Cycle Generative Adversarial Network) method with ConvNeXt block applied was used to analyze three experimental regions. In addition, We compared the experimental results of a training patch size of 512*512 pixels and a 1024*1024 pixel size that was doubled. As a result of experimenting with three regions with different characteristics,the ConvNeXt CycleGAN methodology showed an improved R² value compared to the existing CycleGAN-applied image and histogram matching image. For the experiment by patch size used for training, an R² value of about 0.98 was generated for a patch of 1024*1024 pixels. Furthermore, As a result of comparing the pixel distribution for each image band, the simulation result trained with a large patch size showed a more similar histogram distribution to the original image. Therefore, by using ConvNeXt CycleGAN, which is more advanced than the image applied with the existing CycleGAN method and the histogram-matching image, it is possible to derive simulation results similar to the original image and perform a successful simulation.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.1
• /
• pp.1-16
• /
• 2020

Busking culture which is a element of Urban Amenities is spreading rapidly in the field of public art culture with the change of media environment. However, the lack of a proper institution and policy to manage the negative aspects of it continue to lower urban amenities and make the conflict among stakeholders. The study aims to increase the advantages from the domestic busking culture and derives suggestions to develop the institution and policy for the soft landing of the busking culture. Applied methods to achieve the research objectives are an in-depth interview and overseas case analysis. The result of analysis is as follows. Stakeholders related to the busking culture in South Korea has presented very strongly and concretely in aspect of policy or institutional improvement. In addition, based on the analysis of oversea cases, the researchers have proposed three ways for settling down a proper busking culture: the busking permit system, the management system for professional buskers, and the civil complaint management system through time and noise restrictions.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1527-1539
• /
• 2022

As coastal erosion of the east coast is accelerating, the need for scientific and quantitative coastal erosion monitoring technology for a wide area increases. The traditional method for observing changes in the coast was precision monitoring based on field surveys, but it can only be applied to a small area. The airborne bathymetric Light Detection And Ranging (LiDAR) system is a technology that enables economical surveying of coastal and seabed topography in a wide area. In particular, it has the advantage of constructing topographical data for the intertidal zone, which is a major area of interest for coastal erosion monitoring. In this study, time series analysis of coastal seabed topography acquired in Aug, 2021 and Mar. 2022 on the littoral cell GW36 in Gangwon was performed using the Seahawk Airborne Bathymetric LiDAR (ABL) system. We quantitatively monitored the topographical changes by measuring the baseline length, shoreline and Digital Terrain Model (DTM) changes. Through this, the effectiveness of the ABL surveying technique was confirmed in coastal erosion monitoring.

• Journal of Korea Water Resources Association
• /
• v.55 no.10
• /
• pp.749-759
• /
• 2022

The paradigm of water cycle management in the watershed is changing due to the increase in abnormal climate phenomena caused by climate change and the increase in impervious area due to urbanization. Research is continuously underway based on Low Impact Development technology that can suppress water cycle distortion. In this study, factors that can reflect water cycle distortion were selected before applying LID, and the PSR index for each 148 watershed was calculated for the the Nakdonggang River basin. As of 1975, the PSR index is calculated by calculating the pressure index P, which represents the rate of change in impervious surface area to 2019, the phenomenon index S, which represents the rate of change in water cycle for each subwatershed, and the Low Impact Development area countermeasure index R. The lower PSR index value, the higher the priority management watershed, and the water cycle recovery priority management watershed was calculated in the order of 1, 2, 87, 90, 91, and 147. It is expected that the efficient application of low-impact development factors in accordance with the order of priority management of water cycle by subwatershed in the large area will contribute to the recovery of water cycle distortion.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.4
• /
• pp.57-64
• /
• 2022

Chloride, which is one of the main deterioration factors in reinforced concrete structures, can degrade the performance of the structure due to chloride-induced corrosion of steel. Chloride content at steel depth or the rate of chloride penetration is necessary to determine deterioration of reinforced concrete or to calculate initiation time of steel corrosion caused by chloride attack. Chlorides in concrete are generally identified with typical two methods including chloride profiling using potentiometric titration method and discoloration method using AgNO₃ solution. The former is advantageous to estimate chloride penetration rate (diffusion coefficient in general) with measured chloride contents directly, but it is laborious. In the case of latter, while the result is obtained easily with the range of discoloration, the error may occur depending on workmanship when the depth of chloride ingress is measured. This study shows that chloride penetrated depth is evaluated with the results obtained from discoloration method through image analysis, thereby the error is minimized by workmanship. In addition, the effect of micro-crack in concrete is studied on chloride penetration. In conclusion, the depth of chloride penetration was quantified with image analysis and as it was confirmed that chlorides can rapidly penetrate through micro-cracks, caution is especially required for cracks in concrete structure.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.5
• /
• pp.277-286
• /
• 2022

The elastic and inelastic responses obtained from the experimental and analytical results of two RC building structures under the service level earthquake (SLE) and maximum considered earthquake (MCE) in Korea were used to weinvestigate the characteristics of the mechanisms resisting shear and torsional behavior in torsionally unbalanced structures. Equations representing the interactive effect of translational drift and torsional deformation on the shear force and torsional moment were proposed. Because there is no correlation in the behavior between elastic and inelastic forces and strains, the incremental shear forces and incremental torsional moments were analyzed in terms of their corresponding incremental drifts and incremental torsional deformations with respect to the yield, unloading, and reloading phases around the maximum edge-frame drift. In the elastic combination of the two dominant modes, the translational drift mainly contributes to the shear force, whereas the torsional deformation contributes significantly to the overall torsional moment. However, this phenomenon is mostly altered in the inelastic response such that the incremental translational drift contributes to both the incremental shear forces and incremental torsional moments. In addition, the given equation is used to account for all phenomena, such as the reduction in torsional eccentricity, degradation of torsional stiffness, and apparent energy generation in an inelastic response.

• Smart Media Journal
• /
• v.10 no.4
• /
• pp.35-44
• /
• 2021

Recently, the new subway project called "Great Train Express" is in progress. During the tunnel excavation in the center of city, vibration and noise are generated, which make an uncomfortable effect on nearby residents. In order to prepare for this situation, the construction company generally establishes a noise and vibration management plan at the site from the construction planning stage through consultation with the residents of nearby areas and establishment of countermeasures for complaints raised. However, despite the establishment of a noise and vibration management plan, civil complaints have not been fundamentally resolved due to occurring noise and vibration during the construction in progress. In order to solve this problems, one of the best solution is to provide noise and vibration simulation technology with a high sense of reality and immersion for residents of nearby areas. Considering the ease and convenience of using the system, we intend to develop a UI(User Interface) necessary for the development of a simulation system that can directly experience the air blast and vibration based on virtual reality. The results of this study are expected to contribute to the development of virtual reality-based air blast and vibration simulations in the future.

• The Korean Society of Law and Medicine
• /
• v.22 no.2
• /
• pp.49-79
• /
• 2021

Due to defendant's wrongful act by implant surgery, plaintiff has been suffered serious damages to his face and teeth, and pain caused by establishing implanted teeth. Jeonju Appellate Court sentenced to pay future medical expenses and alimony to the plaintiff in compensation for breach of duty or torts. The ruling is designed to relieve the burden of proof because it is extremely difficult for non-experts to determine whether dentists violated their 'duty of care' or whether there was a causal relationship between damages to medial treatment. It was judged that if symptoms that contributed to the patient's significant outcome occurred during or after surgery, such symptoms could be presumed to have been caused by medical negligence if indirect facts were proven to be other than medical negligence. Originally, the shifting of burden of proof in Germany, has already been developed in medical malpractice case since 1940s. In order to guarantee the patients' right, §630h German Civil Code (BGB) - presumption of negligence in the realization of controllable risk- has been also legislated. BGH (Bundesgerichtshof) has been interested in ensuring that the principle of equality between patients and doctors. So, in this study, we wanted to refer to German precedent cases to analyzing Korean medical malpractice lawsuit. In particular, the decision could be significant in that it approaches closer to allows the shifting burden of proof in drastically growing dental malpractice cases. This is clearly confirmed in the judgment of the dentist's "fault" that "if indirect facts about the symptom or occurrence are proven to be cause other than medical negligence, such symptoms can be presumed to be due to medical negligence."

• The Korean Society of Law and Medicine
• /
• v.22 no.2
• /
• pp.81-109
• /
• 2021

This paper review about the relationship between the prohibition against medical refusal and the principle of private autonomy in medical contracts. The obligation to this Prohibition in Medical Law does not restrict the liberty of contracting a medical contract. On the other hand, the prohibition limits the freedom to terminate medical contracts. Medical contracts can be terminated if the trust between doctors and patients is vanished. However certain restrictions should be placed on termination of the medical contract, because termination of the contract should not be detrimental to patients' health. According to the current medical law the medical contract is to be enforced in principle and can be revoked only with justifiable reason. At the Civil Code on Medical Contracts the freedom to terminate the medical contract is permitted, but this paper suggests the restrictions of the revocation under certain conditions. The Criminal Punishment Regulations against medical refusal should be removed. Refusal the provide medical service should be regulated by administrative sanctions under the National Health Insurance Act's obligation.