• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.481-484
• /
• 2003

A strategy for a torque ripple reduction drive of single-phase SRM with high power factor is proposed. The drive for switched reluctance motor (SRM) is presented to achieve sinusoidal, near unity power factor input current with low torque ripple. The proposed SRM drive has no additional active switch. And a single-stage approach, which combines a DC link capacitor used as dc source and a drive used for driving the motor into one power stage, has a simple structure and low cost. The characteristics and validity of the proposed circuit is discussed in depth through the experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.959-962
• /
• 2004

A strategy for a torque ripple reduction drive of single-phase SRM with high power factor is proposed. The drive for switched reluctance motor (SRM) is presented to achieve sinusoidal, near unity power factor input current with low torque ripple. The proposed SRM drive has no additional active switch. And a single-stage approach, which combines a DC link capacitor used as do source and a drive used for driving the motor into one power stage, has a simple structure and low cost. The characteristics and validity of the proposed circuit is discussed in depth through the experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.88-90
• /
• 2006

Conventional sustaining driver (SD) of plasma display panel (PDP) employing auxiliary circuits on both side of a H-bridge inverter increases volume of PDP with cost. To solve this problem, a new single sustaining driver (SSD), which utilize only one side of auxiliary circuit is proposed. Moreover, using the voltage stress reduction technique (VSRT), the proposed SSD effectively reduces switch voltage stress with a simple structure.

• 전자공학회논문지C
• /
• 제34C권6호
• /
• pp.1-10
• /
• 1997

By considering low power design at higher levels of abstraction rather than at lower levels of abstraction, we can apply various transformation techniques to a system design with wider view and obtain much more effective power reduction with less cost and effort. In this paper, a transformation technique, called power - conscious loop folding is proposed for high level synthesis of a low power system.Our work is focused on reducing the power consumed by functional units in adata path dominated circuit through the decrease of switching activity. Te transformation algorithm has been implemented and integrated into HYPER, a high level synthesis system for experiments. In our experiments, we could achieve a pwoer reduction of up to 50% for data path dominated circuits.

• 한국유체기계학회 논문집
• /
• 제17권6호
• /
• pp.77-83
• /
• 2014

The vessel of integral reactor contains its major primary components such as the fuel and core, pumps, steam generators, and a pressurizer, so its size is proportional to the required space for the installation of each component. The steam generators take up the largest volume of internal space of reactor vessel and their volumes is substantial for the overall size of reactor vessel. Reduction of installation space for steam generators can lead to much smaller reactor vessel with resultant decrease of overall cost for the components and related facilities. A printed circuit heat exchanger is one of the compact types of heat exchangers available as an alternative to conventional shell and tube heat exchangers. Its name is derived from the procedure used to manufacture the flat metal plates that form the core of the heat exchanger, which is done by chemical milling. These plates are then stacked and diffusion bonded, converting the plates into a solid metal block containing precisely engineered fluid flow passages. The overall heat transfer area and pressure drops are evaluated for the steam generator based on the concept of the printed circuit heat exchanger in this study. As the printed circuit heat exchanger is known to have much larger heat transfer area density per unit volume, we can expect significantly reduced steam generator compared to former shell and tube type of steam generator. For the introduction of new steam generator, two design requirements are considered: flow area ratio between primary and secondary flow paths, and secondary side parallel channel flow oscillation. The results show that the overall volume of the steam generator can be significantly reduced with printed circuit type of steam generator.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권10호
• /
• pp.581-586
• /
• 2002

To improve the current waveform of diode rectifiers, we propose a new operating principle for the voltage-doubler diode rectifiers. In the conventional voltage-doubler rectifier circuit, relatively large capacitors are used to boost the output voltage, while the proposed circuit uses smaller ones and a small reactor not to boost the output voltage but improve the input current waveform. A circuit design method is shown by experimentation and confirmed simulation. The experimental results of the proposed diode rectifier satisfies the harmonic guide lines. A high input power factor of 97(%) and an efficiency of 98[%] are also obtained. The new rectifier with no controlled switches meet the harmonic guide lines, resulting in a simple, reliable and low-cost at-to dc converters in comparison with the boost-type current-improving circuits. This paper proposes a nonlinear impedance circuit composed by diodes and inductors or capacitors. This circuit needs no control circuits and switches, and the impedance value is changed by the polarity of current or voltage. And this paper presents one of these applications to improve the input current of capacitor input diode rectifiers. The rectifier using the nonlinear impedance circuit is constructed with four diodes and four capacitors in addition to the conventional rectifiers, that is, it has eight diodes and five capacitors, including a DC link capacitor. It makes harmonic components of the input current reduction and the power factor improvement. Half pulse-width modulated (HPWM) inverter was explained compared with conventional pulse width modulated(PWM) inverter. Proposed HPWM inverter eliminated dead-time by lowering switching loss and holding over-shooting.

• 문화기술의 융합
• /
• 제6권4호
• /
• pp.819-824
• /
• 2020

본 논문에서는 차세대 디지털 회로 설계기술인 양자점 셀룰러 오토마타(QCA)를 이용하여 새로운 멀티플렉서를 제안한다. 디지털 회로 중 멀티플렉서는 입력 신호 중 하나를 선택하여 하나의 라인에 전달하는 회로이다. 이는 D-플립플롭, 레지스터, 그리고 RAM 셀 등 많은 회로에 쓰이므로 현재까지도 다양한 연구가 이루어지고 있다. 하지만 기존에 제안된 평면구조 멀티플렉서는 연결성을 고려하지 않아 큰 회로를 설계할 경우 비효율적으로 면적을 사용하게 된다. 기존에 다층구조로 제안된 멀티플렉서도 있으나 셀 간 상호작용을 고려하지 않아 필요면적이 여전히 높다. 이에 본 논문에서는 셀 간 상호작용을 이용하고, 다층구조를 이용하여 38% 면적축소, 17% 비용감소 그리고 연결성을 개선한 새로운 멀티플렉서를 제안한다.

• 전력전자학회논문지
• /
• 제10권2호
• /
• pp.138-147
• /
• 2005

최근 급속도로 발전된 산업분야에서 요구되는 서보 시스템에서의 빠른 응답특성과 고도의 정밀성을 구현하기 위하여 고속의 연산을 수행할 수 있는 DSP(Digital Signal Processor)의 사용이 필수적이다. 그러나 기존의 DSP는 고속의 연산을 주력으로 전동기 제어에 필요한 PWM 게이팅 발생 장치와 엔코더 입력 장치, ADC(Analog to Digital Converter)등의 주변 장치를 포함하지 않았다. 이러한 추가적인 주변회로로 인한 제어 회로의 복잡성과 보드의 대형화 및 생산단가 상승의 요인으로 작용하였다. 따라서 본 논문에서는 연산 능력이 기존의 DSP에 뒤지지 않으며 전동기 제어 주변회로를 포함하고 있는 TMS320F2812 DSP를 사용하여 현재 산업 현장에서 사용되고 있는 SPMSM 서보 시스템을 제어하여 기존 제어기의 주변회로로 인한 문제점을 해결하고자 한다.

• 한국정보전자통신기술학회논문지
• /
• 제1권2호
• /
• pp.107-122
• /
• 2008

통신망은 크게 누구든지 접속할 수 있는 공중망과 해당 조직 내의 사람들만이 접속할 수 있는 사설망으로 구분할 수 있는데, 공중망의 회선비용 절감과 사설망의 신뢰성 있는 보안 통신 지원이라는 장점만을 부각시킨 것이 VPN이라 할 수 있다. 본 연구에서는 3계층 터널링 기법을 사용하는 IPSec VPN과 2계층 스위칭 기법과 3계층 라우팅 기술을 접목한 새로운 스위칭 기법을 이용하는 MPLS(Multi Protocol Label Switching), 그리고 전용회선을 보안측면에서 비교 분석하였다. VPN이 비용면이나 보안측면에서 전용회선보다 우수하며, IPSec VPN과 MPLS VPN을 비교해보면 안전한 데이터 전송을 위한 보안 유지, 비용 절감, QoS 제공, 운영 및 관리의 유연성을 보장하고, 오히려 IPSec VPN의 문제점을 보완하는 MPLS VPN이 차세대 VPN이라 할 수 있다.

• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.42-47
• /
• 2004

본 연구는 기존에 제안한 방전 AND gate PDP의 문제점을 개선한 연구결과로서 AND gate를 구성하는 DC 방전의 극성을 반대로 설계하여 인접 주사전극에 대한 cross talk 문제를 개선하였다. 또한 기존의 AND gate의 동작이 공간전하에 의한 방전의 비선형성에 의존한 것과는 달리 본 연구에서 제안한 AND gate는 방전 회로에 따라 인가전압이 변화하는 것을 이용한 NOT 논리를 AND gate에 부가하여 동작이 한층 안정해 졌다. 실험 결과4개의 수평 주사전극에 대해 선택적인 어드레스 방전이 가능하였으며 각각 34V와 70V의 AND 방전 및 Data 방전의 동작마진을 얻을 수가 있었다.