• Journal of Animal Science and Technology
• /
• 제47권5호
• /
• pp.759-768
• /
• 2005

본 연구는 무기태 크롬($ClCl_3$)와 유기태화 크롬인 Cr-methionine chelate(크라민®)을 첨가하였을 때 in vitro 조건에서 반추위내 발효성상과 반추미생물체 내 Cr과 Methionine을 분석하여 크라민®의 by-pass 여부를 간접적으로 증명하고자 실시하였다. In vitro 소화시험에 이용한 기초영양소는 Jar 당 반추미생물 기초 영양소로 시중에 유통되고 있는 배합사료 7g(DM), 볏짚 2g(DM) 및 Corn silage 2g(DM)을 동일하게 배합하였으며, 시험구로는 대조구(control), $ClCl_3$를 1000ppb 첨가한 T1구 및 Cr 농도가 1000ppb이 되도록 크라민®을 첨가한 T2구를 두었으며, 처리 당 5반복으로 시험을 수행하였다. T2의 pH는 모든 배양시간에서 대조구 및 T1구에 비하여 낮은 경향을 보였으며, 암모니아 농도는 배양 6시간 전까지는 대조구와 T1구에 비하여 T2구가 높은 경향을 보였으나, 배양 6시간 이후에는 모든 처리구가 일정하게 낮게 유지되었다. 총 휘발성지방산 농도는 모든 처리구가 배양시간이 경과함에 다라 지속적으로 증가하였으며, 대조구에 비하여 T1구와 T2구의 농도가 유의적으로 낮았다. In vitro 배양 12시간 동안 미생물체 건물 회수율은 T1구가 가장 낮은 반면에 T2구가 가장 효율적으로 미생물을 증가시켰다. 반추미생물체 내 Cr 농도는 대조구와 T2구간에는 차이가 없었으나(P>0.05), T1구는 유의적(P>0.05)으로 높게 나타났다. 반추미생물체 내 methionine 및 cyctine 농도는 대조구와 T2구간에는 차이(P>0.05)가 없었으나, T1구는 비교적 낮은 경향을 보였다. 본 시험의 결과를 종합해 보면, 크라민®의 첨가에 따른 in vitro 배양액내 pH 및 암모니아 농도를 포함한 발효특성에 대한 부의 영향은 없는 것으로 판단되며, 오히려 미생물체 단백질의 합성에 이용되어 암모니아의 생성량과 총미생물 건물 회수량을 증가시킬 수 있는 것으로 판단된다. 또한 크라민®은 반추 미생물에 의해 상당히 제한적으로 분해되기 때문에 반추위를 회피해서 소장으로 by-pass 되어 이용된 것으로 판단되었다.

• 한국가금학회지
• /
• 제21권2호
• /
• pp.73-82
• /
• 1994

A study was conducted to develop a new analytical method to quantitate chicken dietary fiber (CDF). Four types of grain diets and 2 types of forages were used. Three broiler chicks at eight weeks of age were used in the Latin square design to estirnate the in vivo digestibility. Six quantitative analytical methods (Southgate method, total dietary fiber or TDF, acid detergent fiber or ADF, neutral detergent fiber or NDF, crude fiber or CF) including CDF were compared in this study. ADF, NDF and CF contained the lowest amount of the unavailable carbohydrate(UC). The value of TDF was higher than the values of ADF, NDF and CF and lower than CDF and the Southgate method. The value of NDF showed the lower values than the CDF, Southgate fiber and TDF. The recovery rate of the fiber in the feces was high in the TDF, ADF, NDF and CF, while CDF and Southgate fiber showed lower recovery rates. TDF, NDF, ADF, or CF can replace chromium in the digestibility test, while the CDF and Southgate fiber can not replace chrorniurn. The digestibility of TDF, NDF, ADF and CF in the chicken showed negative values or values close to zero depending on the types of feed but the digestibility of CDF and Southgate fiber showed relatively high positive values.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.404-408
• /
• 2001

This paper focuses on the pilot-scale investigation of direct recycling of electric arc furnace (EAF) stainless steelmaking dust. The direct recycling of EAF dust is to make pellets with the mixture of the dust and the reducing agent carbon, then introduce the pellets to the EAF. The valuable metals in the dust are reduced and get into the steel as the alloying elements. Experiments simulating direct recycling in an EAF were performed using an induction furnace. But it seems difficult to reduce all metal oxides in the dust so that some metal reducing agents added in the late stage of reduction process. The valuable metals in the dust were reduced partly by carbon and partly by metal reducing agent for the economical concern. The recovery of iron, chromium and nickel from the flue dust and the amount of metal oxides in the slag were measured. The results showed that the direct recycling of EAF stainless steelmaking dust is practicable. It wes also found that direct recycling of flue EAF stainless steelmaking dusts does not affect the chemistry and quality of stainless steel produced in the EAF. It is benefit not only for the environmental protection but also for the recovery of valuable metal resources in this way.

• 대한환경공학회지
• /
• 제27권6호
• /
• pp.590-598
• /
• 2005

본 연구에서는 HPLC와 DRC ICP-MS를 연결하여 수중의 Cr(III)와 Cr(VI) 측정을 위한 최적의 분석조건을 설정하고, 서울시 6개 취수장 원수에서의 Cr(III)와 Cr(VI)의 분포 특성을 조사하였다. 크롬 종(species) 분리를 위한 HPLC 이동상으로는 tetrabutylammonium phosphate monobasic(1.0 mM TBAP), ethylenediaminetetraacetic acid(0.6 mM EDTA) 그리고 2% v/v 메탄올을 사용하였으며, flushing solvent로는 5% v/v 메탄올을 사용하였다. 또한 크롬 종 분리 시 방해물질인 $ArC^+$의 제거를 위한 반응가스로 암모니아($NH_3$) 가스를 사용하였으며, Cr(III)와 Cr(VI)의 최적의 분리를 위해 이동상의 solvent ratio, pH 유속 및 시료 주입량의 변화에 따른 시험을 실시하였다. 외국의 경우 Cr(III)가 Cr(VI)보다 분석 감도가 우수한 것으로 보고되고 있으나 본 연구 결과 반응가스($NH_3$)를 사용할 경우, Cr(III)에 비해 Cr(VI)의 분석 감도가 더 우수한 것으로 나타났으며, 검출한계는 Cr(III)와 Cr(VI)에 대해 각각 $0.061\;{\mu}g/L$, $0.052\;{\mu}g/L$로 분석시간은 3분 이내로 나타났다. 서울시 6개 취수장 원수에서의 Cr(III)는 $0.048{\sim}0.064\;{\mu}g/L$(평균 $0.054\;{\mu}g/L$), Cr(VI)는 $0.014{\sim}0.023\;{\mu}g/L$(평균 $0.019\;{\mu}g/L$)의 농도 범위로 검출되었다. 회수율은 $90.1{\sim}94.1%$ 범위로 우수하게 나타났으며, Cr(III)가 Cr(VI)에 비해 $2{\sim}3$배 정도 높은 농도로 나타났다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.242-246
• /
• 2005

The heavy metal analysis (Cd, Pb, Cu, Cr, Zn, Ni) with various extraction methods was performed using the certified sample and real soil sample. In case of the certified samples, $10.5{\sim}118%$ of recovery was showed with various ranges depend on the metal kinds and extraction methods. Also, the alkali-digestion method was showed the proper results by applying in hexavalent chromium. In case of real sample, compared to amounts of heavy metals extracted using 0.1N-HCl, those extracted using acid digestion are higher by $3{\sim}24$ times in Cu, $1.1{\sim}1.5$ times in Cd, $2{\sim}23$ times in Pb, $3{\sim}104$ times in Zn, $12{\sim}101$ times in Ni, $30{\sim}202$ times in Cr. There is no considerable difference between four acid digestion methods.

• 분석과학
• /
• 제7권4호
• /
• pp.555-561
• /
• 1994

A method was described for the graphite furnace atomic absorption spectrophotometric determination of trace cadmium, copper, chromium and lead in urine samples. The elements were directly determined without any other treatments. The ash temperature was intensively optimized to improve the large background by the removal of organic materials and alkali and alkali earth metals in urine samples. Two kinds of standard solutions were used to plot calibration curves. From the recovery data, it could be confirmed that the analytical results with the synthetic urine matrix similar to real urine were more accurate than with a deionized water matrix.

• Nuclear Engineering and Technology
• /
• 제6권4호
• /
• pp.231-237
• /
• 1974

유동액체를 수송하는 도관 또는 폐용기의 누설의 탐지 및 위치한정을 위하여 $^{51}$ Cr-EDTA및 $^{51}$ Cr-DTPA를 합성하고 Column Experiment 그리고 PH를 변화시켜 Batch equilibrium Experiment를 하였다. Column Experiment에서 $^{51}$ Cr-EDTA의 회수율은 Quartz sand에서 100%, Steel sawdust에서 80.9% 그리고 $^{51}$ Cr-DTPA는 Quartz sand에서 77.4%, Steel sawdust에서 6.4%이다. Recovery curve는 Steel sawdust $^{51}$ Cr-DTPA system에서 예외로 일정한 Plateau 를 표시하지 않는다. Batch Equilibrium Experiment에서 분배계수 Kd와 pH와의 관계를 Quartz asand, Montmorillonite, steel sawdust 그리고 Mixed Cement Raw Material둥을 매질로 하여 검토하였다. 일반적으로 $^{51}$ Cr-EDTA에 대한 Kd값이 $^{51}$ Cr DTPA에 대한 그것보다 낮다. $^{51}$ Cr-EDTA에 대한 Kd값이 pH 6.0, 7.0, 그리고 8.0에서 거의 0이 된다.

• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.135-144
• /
• 1999

The purposes of this study were to survey types of pretreatment methods adopted by industrial hygiene laboratories in Korea for extracting heavy metals in welding fume samples and to compare performances of two pretreatment methods, the acid extraction and the microwave digestion, in extracting heavy metals contained in the real workplace samples from various welding jobs including arc, argon, and carbon dioxide. A total of 25 analytical chemists in the industrial hygiene laboratories participating the quality control program directed by the Korea Industrial Safety Corporation were interviewed by telephone. For the purpose of comparing performance of extracting heavy metals from real workplace samples, a total of 53 welders from 21 workplaces located in Anyang, Uiwang, and Kunpo areas were sampled from the period of March 22, 1999 to April 20, 1999. It was found that the most frequently adopted method for samples from the quality control program was the acid extraction method(40%) followed by the NIOSH 7300 method(36%). The NIOSH method, however, was the dominant method(36%) for samples from workplace followed by the acid extraction method(28%). In this study, two extraction methods, the acid extraction and the microwave digestion, were compared in terms of recovery rate, accuracy, and precision for both manganese and chromium. Both methods produced comparable results for the samples prepared for the quality control program. In contrast, concentrations of two heavy metals determined from real workplace samples pretreated with the microwave digestion method were statis tically significantly higher, manganese(166%) and chromium (200%), than those of utilizing the acid extraction method. These findings were consistent regardless of types of welding techniques used. The results of this study clearly show the importance of verifying the analytical performances of extraction methods for heavy metals not only for the samples from the quality control program but also from the real world samples collected from welding jobs.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.897-900
• /
• 2008

시멘트내 6가 크롬의 분석은, 산성조건에서 6가 크롬이 디페닐카르바지드(DPC)와 결합하여 적자색의 착화합물을 형성하는 것을 원리로 한다. 그러나 6가 크롬은 산성조건에서 강한 산화력을 가지고 있기 때문에 철, 황화물, 유기물 등이 존재하는 경우 해당물질을 산화시키고 3가로 환원된다. 시멘트에는철, 황화물 등의 다양한 환원물질이 존재하기 때문에 분석과정에서 6가 크롬이 과소측정될 가능성이있다. 본 논문에서는 최근 제정된 "시멘트 중 6가 크롬의 정량분석 방법 (KS L 5221)"의 근간이 되는 JCAS I-51 실험방법 중 황산첨가 후 DPC 첨가의 경과시간에 따른 6가 크롬의 실험오차에 대해 검증하였다. 실험결과 황산첨가 후 시간이 경과함에 따라 측정되는 6가 크롬의 농도가 감소하였으며 감소효과는 시멘트마다 다르게 나타내었다. 인위적으로 용출액에 크롬을 첨가한 후 회수율을 측정한 결과, 산-DPC를 동시에 투입한 경우 $94.3{\sim}106.7$%의 회수율을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제22권8호
• /
• pp.801-806
• /
• 2001

A study has been carried out on the separation of gold, iridium, palladium, rhodium, ruthenium and platinum in chromite samples and their quantitative determination using inductively coupled plasma atomic emission spectrometry (ICP-AES). The dissolution condition of the minerals by fusion with sodium peroxide was optimized and chromatographic elution behaviour of the rare metals was investigated by anion exchange chromatography. Spectral interference of chromium, a matrix of the minerals, was investigated on determination of gold. Chromium interfered on determination of gold at the concentration of 500 mg/L and higher. Gold plus trace amounts of iridium, palladium, rhodium and ruthenium, which must be preconcentrated before ICP-AES was separated by anion exchange chromatography after reducing Cr(Ⅵ) to Cr(III) by H2O2. AuCl4- retained on the resin column was selectively eluted with acetone- HNO3-H2O as an eluent. In addition, iridium, palladium, rhodium and ruthenium remaining on the resin column were eluted as a group with concentrated HCl. However, platinum was eluted with concentrated HNO3. The recovery yield of gold with acetone-HNO3-H2O was 100.7 ${\pm}2.0%$, and the yields of palladium and platinum with concentrated HCl and HNO3 were 96.1 ${\pm}1.8%$ and 96.6 ${\pm}1.3%$, respectively. The contents of gold and platinum in a Mongolian chromite sample were 32.6 ${\pm}$ 2.2 ${\mu}g$/g and 1.6 $\pm$ 0.14 ${\mu}g$/g, respectively. Palladium was not detected.