• 한국재료학회지
• /
• 제19권7호
• /
• pp.376-381
• /
• 2009

Indium Tin Oxide (ITO) thin films on Polyethylene Terephtalate (PET) substrate were prepared by Roll-to-Roll sputter system with targets of 5 wt% and 10 wt% $SnO_2$ at room temperature. The influence of the chromaticity (b*) and transmittance properties of the ITO Films were investigated. The ITO thin films were deposited as a function of the DC power, rolling speed, and Ar/$O_2$ gas flow ratio, and then characterized by spectrophotometer. Their crystallinity and surface resistance were also analyzed by X-ray diffractometer and 4-point probe. As a result, the chromaticity (b*) and transmittance of the ITO films were broadly dependent on the thickness, which was controlled by the rolling speed. When the ITO films were prepared with the DC power of 300 W and the Ar/$O_2$ gas flow ratio of 30/1 sccm using 10 wt% $SnO_2$ target as a function of the rolling speeds 0.01 through 0.10 m/min, its chromaticity (b*) and transmittance were about -4.01 to 11.28 and 75.76 to 86.60%, respectively. In addition, when the ITO films were deposited with the DC power of 400W and the Ar/$O_2$ gas flow ratio of 30/2 sccm used in 5 wt% $SnO_2$ target, its chromaticity (b*) and transmittance were about -2.98 to 14.22 and 74.29 to 88.52%, respectively.

• 한국재료학회지
• /
• 제21권5호
• /
• pp.255-262
• /
• 2011

This paper has relatively high technical standard and experimental skill. The fabrication of TCO film with high transparency, low resistance and low chromaticity require exact control of several competing factors. This paper has resolved these problems reasonably well, thus recommended for publication. Indium tin oxide(ITO) thin films were by D.C. magnetron roll-to-roll sputter system utilizing ITO and $SiO_2$ targets of ITO and $SiO_2$. In this experiment, the effect of D.C. power, winding speed, and oxygen flow rate on electrical and optical properties of ITO thin films were investigated from the view point of sheet resistance, transmittance, and chromaticity($b^*$). The deposition of $SiO_2$ was performed with RF power of 400W, Ar gas of 50 sccm and the deposition of ITO, DC power of 600W, Ar gas of 50 sccm, $O^2$ gas of 0.2 sccm, and winding speed of 0.56m/min. High quality ITO thin films without $SiO_2$ layer had chromaticity of 2.87, sheet resistivity of 400 ohm/square, and transmittance of 88% and $SiO_2$-doped ITO Thin film with chromaticity of 2.01, sheet resistivity of 709 ohm/square, and transmittance of more than 90% were obtained. As a result, $SiO_2$ was coated on PET before deposition of ITO, their chromaticity($b^*$) and transmittance were better than previous results of ITO films. These results show that coating of $SiO_2$ induced arising chromaticity($b^*$) and transmittance. If the thickness of $SiO_2$ is controlled, sheet resistance value of ITO film will be expected to be better for touch screen. A four point probe and spectrophotometer are used to investigate the properties of ITO thin films.

• 한국군사과학기술학회지
• /
• 제10권3호
• /
• pp.51-61
• /
• 2007

This paper concerns about the requirement analysis for night vision imaging system(NVIS), whose purpose is to intensify the available nighttime near infrared(IR) radiation sufficiently to be caught by the human eyes on a miniature green phosphor screen. The requirements for NVIS are NVIS radiance(NR), chromaticity, daylight legibility/readability, etc. The NR is a quantitative measure of night vision goggle (NVG) compatibility of a light source as viewed through goggles. The chromaticity is the quality of a color as determined by its purity and dominant wavelength. The daylight legibility/readability is the degree at which words are readable based on appearance and a measure of an instrument's ability to display incremental changes in its output value. In this paper, the requirements of NR, chromaticity, and daylight legibility/readability for Type I and Class B/C NVIS are analyzed. Also the rationale is shown with respect to those requirements.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.243-243
• /
• 2017

Leaf colors of rice can be used to identify stress level due to its adaptation to environmental change. For most leaves green-related colors are sourced from chlorophyll a and b. For most leaves green-related colors are consisted of chlorophyll a and b. Chlorophyll concentration is normally measured using a spectrophotometer in laboratory. In some remote observation fields, it is impossible to collect the leaves, preserve them, and bring them to laboratory to measure their chlorophyll content. The measurement of chlorophyll content is observed through its color. Using CIE chromaticity diagram leaf color information in RGB is transformed into wavelength (in nm). Pheophytin contents were also analyzed in 95% ethanol extracts. In the process of leaf development of rice young seedling, both pigments were compared. Leaf samples from different rice seedling bed is taken, their colors and RGB values are recorded using Photoshop Image Analysis. SPAD-502 values were also measured. The chlorophyll and Pheophytin contents were fully estimated by ${\rightthreetimes}_{avg}$ on CIE chromaticity diagram.

• 한국정보통신학회논문지
• /
• 제20권5호
• /
• pp.986-991
• /
• 2016

본 연구에서는 $Nb_2O_5/SiO_2$ 두개의 버퍼층위에 기판온도 (상온~$400^{\circ}C$) 에 따른 ITO 박막을 DC 마그네트론 스퍼터링 법으로 증착하여 전기적 및 광학적 특성을 조사하였다. 기판온도가 상승함에 따라 그레인 크기 증가에 기인한 결정성 향상 때문에 비저항이 낮아지는 경향을 나타내었다. 기판온도 $400^{\circ}C$ 에서 증착한 ITO 박막이 $3.03{\times}10^{-4}{\Omega}{\cdot}cm$ 의 비저항과 $86.6{\Omega}/sq.$의 면저항으로 가장 우수한 값을 나타내었다. 광학적 특성을 측정한 결과, 기판온도가 상승함에 따라 가시광 영역 (400~800nm) 에서의 평균 투과도는 증가하였으며 색도 ($b^*$) 값은 감소하였다. $400^{\circ}C$에서 증착한 ITO 박막의 평균 투과도와 색도 ($b^*$) 는 85.8% 와 2.13 으로 버퍼층이 삽입되지 않은 ITO 박막의 82.8% 와 4.56 에 비해 상당히 향상된 결과를 나타내었다. 이를 통해 $Nb_2O_5/SiO_2$ 두개의 버퍼층을 도입한 ITO 박막은 인덱스 매칭 효과로 인해 투과도 및 색도 ($b^*$) 등의 광학적 특성이 현저히 향상되었음을 확인할 수 있었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.166-169
• /
• 2007

최근에 정부의 "15/30 LED조명 보급정책"에 힘입어 개발된 8W급 조명용 LED광원의 CIE 색도좌표 (chromaticity coordinate)와 주파장(dominant wavelength)등을 측정 고찰 하였다. 적색(R), 녹색(G), 청색(B), 백색(W)순으로 주파장은 각각 620[nm], 531[nm], 465[nm], 579[nm]이고, 자극순도(excitation purity)는 0.98, 0.82, 0.97, 0.15이며, 휘도순도(colorimetric putity)는 45[%], 16[%], 279[%], 6[%]로 나타났다. Power LED의 최적배치 설계로서, 특히 백색 LED광원의 경우 백열전구(15 lm/W)에 비해 3배 이상의 높은 효율(47.71m/W)을 보였고, 배광측정에서는 78.7%의 효율로 나타났다. 현재 LED광원은 MR16이나 베이스 타입 등의 형태로 제작하여 스탠드, 복도등, 비상유도등, 침실용 등의 용도에 사용되고, 일부는 LED의 원형이나 면(flat)타입으로 가로등이나 투광등으로도 활용되고 있다. 따라서 이들에 대한 각각의 특성들을 제시해 둘 필요성인 인지되어 국내 최초로 개발된 R/G/B/W 8W급 LED광원에 대한 기본적인 광특성 결과를 얻었으며, 이중에서 HB 백색 LED램프의 색도좌표 값을 얻어 CIE표준광과의 색도좌표(x, y) 위치를 비교 검토할 수 가 있었다.

• 정보처리학회논문지B
• /
• 제18B권2호
• /
• pp.51-56
• /
• 2011

흑체의 온도 변화에 대한 영상의 색차를 줄이는 본질 영상은 단일 불변 방향을 검출하고 백색 장면 조명체를 기반으로 하기 때문에 실영상에 존재하는 다수의 불변 방향과 유색 장면 조명체에 취약하다. 이러한 문제를 해결하기 위해 본 논문에서는 ${\chi}$-색도 공간에서 ROI의 전방향프로젝션과 백색패치의 평행이동을 통해 불변 방향을 검출하는 본질 영상 획득 기법을 제안한다. 3차원 RGB 공간 분석의 어려움으로 인하여, 본 논문 또한 밝기가 고려되지 않은 ${\chi}$-색도 공간을 사용한다. 이 공간에서 유색 조명체의 효과는 백색패치의 평행이동을 통해 감소시키고, 색차에 따라 가상의 선분으로 나타나는 불변 방향은 ROI의 전방향 프로젝션을 통해 검출한다. 다수의 불변 방향을 고려하여 ROI 선택은 3D 히스토그램에서 빈도수에 의해 결정한다. 검출 후, 본질 영상은 불변 방향의 직교 방향으로의 프로젝션과 RGB영상으로의 역변환 과정을 통해 획득된다. 실험에서 Ebner가 제안한 데이터집합을 실험 영상으로 이용하였고, 불변 방향의 표준편차와 색항등성 측도를 평가 측도로 사용하였다. 제안한 기법의 실험 결과는 엔트로피 기법보다 불변 방향의 표준 편차가 낮았으며, 기존의 기법에 비해 색항등성이 2배 이상 높았다.

• 한국세라믹학회지
• /
• 제48권1호
• /
• pp.34-39
• /
• 2011

Systematic study on relationship between celadon coloring and glaze component was conducted by chromaticity analysis and M$\ddot{o}$ssbauer spectroscopic analysis. The chromaticity ($L^*$, $a^*$, $b^*$ values) and M$\ddot{o}$ssbauer analysis results were correlated to the amount of $Fe_2O_3$, $TiO_2$, MnO, and $P_2O_5$, which are the essential factors influencing celadon coloring. According to chromaticity analysis, celadon glaze color belongs to GY group when the addition of $TiO_2$ was 1.4%, whereas the color belongs to BG group when the addition of $TiO_2$ was 0.1%. For the GY group, the colors change from GY to YR with the decrease of brightness as the addition of $TiO_2$, MnO, and $P_2O_5$ increases. According to M$\ddot{o}$ssbauer analysis results, as the amount of divalent iron ion increases, the $a^*$ and $b^*$ values decrease, on the other hand, $L^*$ value increases. The ratio of divalent iron ion produced in reductive sintering process is found to be 80~95% in this study, which induces the increase of $L^*$ values in celadon glaze.

• 공업화학
• /
• 제27권3호
• /
• pp.325-329
• /
• 2016

환경 친화적이고 질병을 유발시키지 않은 천연색소의 사용이 증가함에 따라 천연색소를 추출하는 다양한 방법이 연구되고 있다. 본 연구에서는 천연염료인 brazilein, crocin, chlorophyll을 포함하고 있는 식물성 원료인 소목, 치자, 쑥을 대상으로 천연염료를 추출하였다. 추출용매의 pH와 추출시간을 변수로 추출된 천연염료의 적색, 황색, 녹색계열의 목표색을 설정하고 추출된 천연염료의 명도와 색의 좌표(L, a, b)의 정량적 수치로부터 색도분석을 수행하였다. 소목의 적색소인 brazilein과 치자의 황색소인 crocin의 경우 목표색인 카드뮴 레드와 카드뮴 옐로에 근접한 색상을 추출할 수 있었다. 추출시간 20 min을 기준으로 brazilein의 경우 pH 12, crocin의 경우 pH 9에서 색차를 나타내는 ${\Delta}E^*$가 각각 18.2와 18.4로 목표색과 유사한 색의 색소가 추출되었다. 그러나 쑥의 녹색색소인 chlorophyll의 경우 목표색인 크롬 그린과는 차이를 보였다.

• 대한치과보철학회지
• /
• 제26권1호
• /
• pp.185-196
• /
• 1988

The purpose of this investigation was to analyze the color of natural teeth by means of the OFC-1001 DP colorimeter which could measure in Adams Coordinate System (L,a,b system). The subjects were the 164 persons (82 men and 82 women) ranged from the teen to the sixtieth who had come to infirmary of dental college, Chosun University. The colors of incisal third, middle third and cervical third of maxillary right incisor, maxillary right canine and maxillary right second premolar were examined after the teeth were cleaned, polished and dried. The data were analyzed statistically by means of SPSS (Statistical Package For the Social Science). The results were as follows. 1. The means of L(lightness), a (red chromaticity), b (yellow chromaticity) of all teeth were measured (Table 2,3,4). 2. The color of teeth was yellowish-gray or bluish-gray. 3. The L value and b value of the cervical third was greater than those of the incisal and middle third. 4. The L value of maxillary 2nd premolar was greater than those of maxillary incisor md maxillay canine. 5. The a & b values of maxillary canine were greater than those of maxillary incisor and maxillary 2nd premolar. 6. The average values of L,a,b of teeth between male and female were not significant. 7. The L values of teeth were decreasing and the b values of teeth were increasing as the age was increased, but there was no corelation between the a values and aging.