• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.6
• /
• pp.942-949
• /
• 2010

Morus alba L., a kind of Oriental medicinal herbs, has been traditionally used to treat pulmonary asthma and congestion. According to recent studies, extracts of M. alba L. have showed anti-inflammatory, anti-oxidant, anti-tumor and hypoglycemic effects. However, the molecular mechanisms on how it acts as a death-inducer in cancer cells have not been fully understood. In this study, we investigated the cell death effects of methylene chloride extracts of M. alba L. (MEMA) in A549 human lung carcinoma cells. It was shown that MEMA induced the apoptotic cell death proved by increased sub-G1 phase cell population, apoptotic body formation and chromatin condensation. MEMA treatment induced the expression of death receptor-related proteins such as death receptor (DR) 4, DR5, Fas and FasL, which further triggered the activation of caspase-8 and the cleavage of Bid in a concentration-dependent manner. However, MEMA reduced anti-apoptotic Bcl-2 and Bcl-xL expression which contributed to the loss of mitochondrial membrane potential (MMP), and the activations of caspase-9 and caspase-3. Meanwhile, the morphological study indicated a characteristic finding of autophagy, such as the formation of autophagosomes in MEMA-treated cells. Furthermore, markers of autophagy, namely, the increased MDC-positive cells, conversion of microtubule-associated protein light chain 3 (LC3)-I to LC3-II and increased beclin-1 accumulation, were observed. Taken together, these findings demonstrated that MEMA triggered both autophagy and apoptosis in A549 cancer cells. They might suggest that M. alba L. could be a prospective clinical application to treat human lung cancers.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.1-8
• /
• 2023

Marine and hydraulic structures are subject to durability damage not only due to the penetration of sea water but also due to the attachment of marine organisms. Therefore, in this study, we tried to develop an antifouling coating agent with self-cleaning function for marine concrete. It was confirmed that the antifouling coating agent mixed with AKD, cellulose nanofibers and BADGE had sufficient antifouling performance at a well hydrophobicity of around 140° in contact angle and an inclination angle of 15°. In the abrasion resistance test of the surface, only a maximum loss of 0.015 g occurred. In the durability test, as a result of the chloride ion permeation test, almost no chloride ion permeation occurred in the variable where the coating agent was applied, and carbonation and freeze-thaw damage also rarely occurred, so it was analyzed that it was effective in securing durability of concrete.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.59-65
• /
• 2018

RC(Reinforced Concrete) structures are exposed to various exterior conditions, and the performances of both chloride resistance and freezing/thawing action are evaluated for those exposed to corrosive environment-sea shore. Recently developed FRP Hybrid Bars which is coated with glass fiber and epoxy with core steel has an engineering advantage of higher Elasticity than FRP rod. In this work, corrosion resistance, weight loss, and bond strength are evaluated for the FRP Hybrid Bar tested through freezing/thawing action for 300cycles. The double coated FRP Hybrid Bar shows the least weight loss without defection due to freezing/thawing action. Bond strength in FRP Hybrid Bar increases to 120% of normal steel through torturity effect with Si-coating. Bond strength in normal steel shows 0.86~0.89times in 3-day corrosion acceleration and 0.35~0.38times in 5-day corrosion acceleration, however, that in FRP Hybrid Bar shows little changes in bond strength before and after freezing/thawing action.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.451-457
• /
• 2001

Because liquids with high molecular weight such as mineral oil have low vapor pressure at room temperature, it is generally thought to be difficult to lose them to evaporation. However, when they are dispersed into air in small droplets during application in machining processes, their surface area becomes considerably higher. To determine the potential for metalworking fluids (MWF) filter losses, MWF mist was generated and collected on polyvinyl chloride (PVC) filters in test chamber. After collected MWF was exposed to clean air during designated period (range 10~240 minutes) and the filters were desiccated, losses were evaluated. As duration of clean air passing through PVC filter increased, loss of MWF gradually increased. MWF lost after 10 minutes ranged form 12.4 % to 21.8 % of the original loading mass, on average 53.3 % of the total loss. These results indicate that significant mass of MWF collected on PVC filters can be lost at the beginning of air sampling. Loss of MWF collected on PVC filter also occurred during desiccation without active airflow. In multiple regression to identify which factors influence the loss of MWF collected on PVC filter, both duration of air passing through PVC filter and MWF age (fresh vs. used) were significant predictor (p=0.0001). Therefore, workers' exposure to MWF measured method 0500, may underestimate true concentration. Further study is needed to develop a new method to quantify the workers' exposure to airborne MWF mist accurately.

• Korean Journal of Metals and Materials
• /
• v.48 no.6
• /
• pp.523-532
• /
• 2010

Co-application of organic coating and cathodic protection has not provided enough durability to low-alloyed steels inseawater ballast tank (SBT) environments. An attempt has made to study the effect of alloy elements (Al, Cr, Cu, Mo, Ni, Si, W) on general and localized corrosion resistance of steels as basic research to develop new low-allowed steels resistive to corrosion in SBT environments. For this study, we measured the corrosion rate by the weigh loss method after periodic immersion in synthetic seawater at $60^{\circ}C$, evaluated the localized corrosion resistance by an immersion test in concentrated chloride solution with the critical pH depending on the alloy element (Fe, Cr, Al, Ni), determined the permeability of chloride ion across the rust layer by measuring the membrane potential, and finally, we analyzed the rust layer by EPMA mapping and compared the result with the E-pH diagram calculated in the study. The immersion test of up to 55 days in the synthetic seawater showed that chromium, aluminium, and nickel are beneficial but the other elements are detrimental to corrosion resistance. Among the beneficial elements, chromium and aluminium effectively decreased the corrosion rate of the steels during the initial immersion, while nickel effectively decreased the corrosion rate in a longer than 30-day immersion. The low corrosion rate of Cr- or Al-alloyed steel in the initial period was due to the formation of $Cr_2FeO_4$ or $Al_2FeO_4$, respectively -the predicted oxide in the E-pH diagram- which is known as a more protective oxide than $Fe_3O_4$. The increased corrosion rate of Cr-alloyed steels with alonger than 30-day exposure was due to low localized corrosion resistance, which is explained bythe effect of the alloying element on a critical pH. In the meantime, the low corrosion rate of Ni-alloyed steel with a longer than 30-day exposure wasdue to an Ni enriched layer containing $Fe_2NiO_4$, the predicted oxide in the E-pH diagram. Finally, the measurement of the membrane potential depending on the alloying element showed that a lower permeability of chloride ion does not always result in higher corrosion resistance in seawater.

• Analytical Science and Technology
• /
• v.14 no.4
• /
• pp.364-370
• /
• 2001

The corrosion behaviors of reinforcing steels were investigated under chloride ion contained in cement mortar including gypsum by the implementation of half cell potential measurement, EPMA analysis, exterior features, weight loss and extraction experiment. The acceleration test equipment accelerated corrosion of mild steel bar in a short period of time. From observing the exterior features and weight loss, we could evaluate the measure of corrosion. Also, from the extraction experiment of ${SO_4}^{2-}$ with $Cl^-$ ions contained in the ceramic mortar, we concluded that ${SO_4}^{2-}$ ion affected more on the corrosion mechanism in comparison to pH.

• Biomolecules & Therapeutics
• /
• v.16 no.4
• /
• pp.328-335
• /
• 2008

This study was undertaken to investigate whether honokiol could enhance the pentobarbitalinduced sleeping behaviors through $\gamma$-aminobutyric acid (GABA) receptor $Cl^-$ channel activation. Thirty minutes after the oral administration of honokiol, mice were received sodium pentobarbital (42 mg/kg, i.p.). The time elapsed from pentobarbital injection to the loss of the righting reflex was taken as sleeping latency. The time elapsed between the loss and voluntary recovery of the righting reflex was considered as the total sleeping time. Western blot technique and $Cl^-$ sensitive fluorescence probe were used to detect the expression of $GABA_A$ receptor subunits and $Cl^-$ influx in the primary cultured cerebellar granule cells. Honokiol (0.1 and 0.2 mg/kg) prolonged the sleeping time induced by pentobarbital (42 mg/kg) in a dosage-dependent manner. Honokiol (20 and 50 ${\mu}M$) increased $Cl^-$ influx in primary cultured cerebellar granule cells, and selectively increased the $GABA_A$ receptor $\alpha$-subunit expression, but had no effect on the abundance of $\beta$ or $\gamma$-subunits. Chronic treatment with 20 ${\mu}M$ honokiol in primary cultured cerebellar neurons did not affect the abundance of GAD65/67. The results suggested that honokiol could potentiate pentobarbital-induced sleeping through $GABA_A$ receptor $Cl^-$ channel activation.

• The Korean Journal of Mycology
• /
• v.44 no.4
• /
• pp.296-299
• /
• 2016

Lentinula edodes is an edible mushroom that contains a ${\beta}$-glucan called lentinan, which has antitumor and immune-enhancing properties. In the present study, the ${\beta}$-glucan contents of L. edodes mushrooms cultivated on sawdust with different nutritional supplements and fruiting temperatures were measured using a commercial ${\beta}$-glucan assay kit purchased from Megazyme (Bray, Ireland). The weight loss of sawdust media and the yield of fruiting bodies showed similar trends, but the yield was more closely associated with the nutritional supplements used than the weight loss of sawdust media was. The ${\beta}$-glucan contents of L. edodes were 39.5-42.1%, except in the bean curd refuse + $CaCl_2$ supplementation group (50.4%). Furthermore, the ${\beta}$-glucan content decreased with increasing temperatures and was 42.4% at a low fruiting temperature.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.7-11
• /
• 2001

The influence of temperature and calcium concentration on the gelation kinetics of purified Aigeok system has been investigated by small deformation oscillatory measurement. DE(degree of esterification) of the present sample was indicated of low methoxyl Aigeok polysaccharide by FT-IR. The calcium induced gelation of Aigeok has been studied. Both moduli reached the saturation value during the period of experiments. Rate constant increased with increasing calcium concentration, however above 4.08 mM calcium chloride caused a sudden drop in gel strength. The experimental result that the decrease in gel strength at high calcium concentration was seems to be phase separation or competitive inhibition between calcium ions. The storage and loss shear moduli decreased with increasing temperature. The rate constant of Aigeok system remarkably dropped above $35^{\circ}C$. Thus hydrogen bonding is prior to hydrophobic interaction for Aigeok molecule.

• Food Science and Preservation
• /
• v.30 no.6
• /
• pp.969-982
• /
• 2023

This study evaluated the impact of blanching pak choi stems and leaves in various solutions (distilled water, 2% NaCl, and 2% citric acid) at 100℃ on their quality characteristics. The highest stem heating loss was observed in the sodium chloride solution (S-NB) at 15.10% (p<0.001), and the highest leaf heating loss was in L-NB at 11.44% (p<0.001). No significant variation was found in the moisture content of both stems and leaves. Relative to the control, the L value (lightness) of the stem decreased while the b value (yellowness) increased (p<0.05). In the leaves, the a value (redness/greenness) and b value increased in L-CB, whereas they decreased in other groups (p<0.05). S-NB exhibited the highest true retention (TR) of total polyphenol content (TPC) in stems (p<0.01) and the highest TR of total flavonoid content (TFC) as well (p<0.001). For leaves, the highest TR of TPC and TFC was in L-WB (p<0.001). In terms of antioxidant activity, S-NB in stems and L-WB in leaves showed the highest scavenging activity measured by DPPH and ABTS⁺ assays (p<0.001). Microorganisms were absent in all pretreatment groups but present in the control. The results suggest that blanching pak choi stems in 2% NaCl solution and leaves in water optimally preserves biologically active compounds and nutrients.