• Proceedings of the KOSOMBE Conference
• /
• v.1989 no.05
• /
• pp.7-8
• /
• 1989

The graft copolymer of chitosan with amino acid, L-lysine was synthesized by heterogeneous copolymerization and was evaluated as an artificial skin. The mechanical properties under dry and wet state, water content, water vapor transmittance rate and biodegradability were measured. The tensile strength and elongation under wet state ranged $0.3-0.5\;kg/mm^2$, 10-13%, respectively. Water vapor transmittance rate ranged $450-500\;g/m^2{\cdot}day$ like that of the normal skin. The weight loss of prepared membrane by protease IV was measured for the degree of biodegradation. The degree of biodegradation was around 15% and after 4 days it was slow. Biocompatibility was evaluated by studying the attachment of human fibroblast on the prepared membrane surface.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.84-85
• /
• 1996

키틴은 자연계에 풍부하게 존재하는 다당류로서 이것을 이용하여 탈아세틸화된 형태인 키토산을 제조하였다. 키토산에는 히드록시기, 아민기 등 친수성 작용기들이 있어서 탈수용 분리막의 재료로서 많은 연구가 진행되어왔다. 함산소연료와 정밀화학제품의 원료로 쓰이는 MTBE(methyl t-butyl ether)는 methanol과 i-butylene을 합성시켜 만드는데 고순도의 MTBE를 얻기위해서는 미반응된 methanol의 분리, 제거가 필수적이다. 이에, methanol이 극성을 띄고 상대적으로 MTBE가 무극성인 것을 이용한 투과증발분리 연구가 진행되고 있다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2008.05a
• /
• pp.69-72
• /
• 2008

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05b
• /
• pp.73-77
• /
• 2004

막분리 기술인 정밀여과와 한외여과는 물질의 크기 차에 따른 체분리 (sieving)를 기본 원리로 하기 때문에 분자수준에서의 선택적 물질분리가 어렵다는 문제점이 있다. 이러한 문제점을 해결하기 위한 대안으로서 분리막에 분자수준에서의 물질 선택성을 부여한 친화성 막(affinity membrane) 제조에 대한 연구가 활발히 이루어지고 있다.(중략)

• Proceedings of the Membrane Society of Korea Conference
• /
• 2005.11a
• /
• pp.259-262
• /
• 2005

• Membrane and Water Treatment
• /
• v.1 no.4
• /
• pp.231-251
• /
• 2010

The sulfatation of chitosan, by reaction with chlorosulfonic acid under controlled conditions, allowed increasing the pH range of chitosan solubility. The biopolymer was characterized using FTIR and $^{13}C$-NMR spectroscopy, elemental analysis and titration analysis and it was tested for mercury recovery by polymer enhanced ultrafiltration (PEUF). In slightly alkaline conditions (i.e., pH 8) mercury recovery was possible and at saturation of the polymer the molar ratio $-NH_2$/Hg(II) tended to 2.6. Polymer recycling was possible changing the pH to 2 and the polymer was reused for 3 cycles maintaining high metal recovery. The presence of chloride ions influences metal speciation and affinity for the polymer and "playing" with metal speciation allowed using the PEUF process for mercury separation from cadmium; at pH 11 the formation of hydroxo-complexes of Hg(II) limits it retention. Cake formation reveals the predominant controlling step for permeation flux.

• Membrane Journal
• /
• v.13 no.1
• /
• pp.29-36
• /
• 2003

A characterization of the permeation and separation using single salt solution was carried out with charged composite membranes. Various charged composite membranes were fabricated by blending an ionic polymer with a nonionic polymer in different ratios. In this study, sodium alginate, chitosan and poly(vinyl alcohol) were employed as anionic, cationic and nonionic polymers, respectively. The permeation and separation behaviors of the aqueous salt solutions have been investigated through the charged composite membranes with various charge densities. As the content of the ionic polymer increased in the membrane, the hydrophilicity of the membrane increased, and pure water flux and the solution flux increased correspondingly, indicating that the permeation performance through the membrane is determined mainly by its hydrophilicity. Electrostatic interaction between the charged membrane and ionic solute molecules, that is, Donnan exclusion, was observed to be attributed to salt rejection to a greater extent, and molecular sieve mechanism was effective for the separation of salts under a similar electrostatic circumstance of solutes.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.2
• /
• pp.247-250
• /
• 2011

The excess volumes of mixing of benzyl alcohol and halothane in vesicle and in suspensions of several lipids have been determined at $25^{\circ}C$ it using a excess volume dilatometer. The potency of general anesthetics has long been known to correlate with lipid solubility. Denaturations of the vesicle, which is a sole membrane protein in the purple membrane of Halobacteriun Halobium, were studied by absorption changes at 280 nm and fluorescence changes at 330 nm and excess volume dilatometer. The particle size analysis of viscous polymer solutions by diffusional interchange is the key step by measurement. The excess volume of mixing in chitosan was found to be negative, whereas them of purple membrane, Halobacteriun Halobium and red membrane were positive in benzyl alcohol and halothane. This result was confirmed as Miller's supposition.

• KSBB Journal
• /
• v.13 no.2
• /
• pp.125-132
• /
• 1998

Protein affinity membrane was prepared via the coating of chitosan gel on the porous flat polysulfone membrane surface, followed by the immobilization f the reactive dye (Cibacron Blue 3GA) to the chitonsan gel. The maximum protein binding capacity of affinity membrane was about 70${\mu}g/cm^2$ determined by the batch adsorption experiments of human serum albumin (HSA). Using module of this membrane, the characteristics of protein chromatography were investigated through the experiments of elution and frontal chromatography of HSA. This membrane module promises as a chromatography column, since it represented a lower pressure drop and a greater reproducibility. The protein separation ratio was significantly influenced by the flow rate of mobile phase and the injection quantity of HSA. The dynamic protein binding capacity of module decreased from the equilibrium binding capacity with increasing flow rate and approached the value of 15 - 20 ${\mu}g/cm^2$ for flow rates above 6 mL/min.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.524-536
• /
• 1994

Chitosan is known to be a good biocompatible natural polymer. Polyethyleneglycol monomethacrylates(PEGM) were grafted onto chitosan and their reaction conditions and properties of the graft polymers obtained were estimated. Using ceric ammonium nitrate(CAN) as the initiator, the optimum condition for graft polymerization was determined amount of the initiator and monomer concentrations and reaction time. Grafting yields such as total conversion, the percentage of grafting and the efficiency of grafting were calculated and examined the optimum reaction condition for high grafting yields. The percentage of grafting and total conversion were maximum at condition that the concentration of initiator was $4{\sim}5{\times}10^{-3}M$, the concentration of monomer was 0.5~0.6M, the reaction time was 2~3 hours and the reaction temperature was about $40^{\circ}C$. Thermal characteristics, solubility for chitosan solvents and inherent viscosity of synthesized graft copolymers were investigated. In high initiator concentration, characteristics of chitosan were greatly diminshed. In case of inherent viscosities, chitosan-g-PE-90 was 2.81 dl/g, chitosan-g-PE-200, 3.01dl/g and chitosan-g-PE-350, 4.93dl/g. And a tendency of viscosity increase depending on the length of ethylene oxide residue was confirmed. Degree of swelling, tensile strength, elongation of membrane prepared from graft copolymers were determined. Properties of graft copolymers were affected by percentage of grafting and length of ethylene oxides residue in polyethylene glycol monomethacrylates. Tensile strength, elongation and degree of swelling of graft copolymers were remarkably improved than chitosan. As percentage of grafting increased, the amount of drug permeation was also increased.