• 농약과학회지
• /
• 제7권4호
• /
• pp.271-279
• /
• 2003

IAP-3006 원제(지베렐린산)의 SD계 랫드에 대한 아급성 경구 독성시험을 위하여 랫드에 1,000, 10,000과 15,000 ppm의 시험물질을 분말사료에 혼입하는 방법으로 주 5일, 90일간 경구 투여하여 그 독성과 안전성을 조사하였다. 전 시험기간 동안 모든 시험군의 동물에서 어떠한 임상 증상과 사망동물은 관찰되지 않았으며, 또한 체중변화, 사료 음수섭취량, 안과학적 검사, 뇨 검사 및 부검소견에서도 유의성 있는 변화는 보이지 않았다. 비록 혈액학적 검사, 혈액생화학적 검사 및 장기중량에서 유의성 있는 변화를 보였으나 모두 정상 범위에서의 변화이고 용량 의존적으로 나타나지 않았으며, 병리학적 소견에 있어서도 대조군과 비교하여 특이하게 다른 병변은 관찰되지 않았다. 이상의 결과로부터 IAP-3006 원제는 최고 투여용량인 15,000 ppm 에서도 유의할 만한 독성이 유발되지 않았으므로 안전한 것으로 판단되었으며, 무해용량은 15,000 ppm 이상으로 추정되었다.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.608-612
• /
• 2016

D-(+)-glucose (Glc) was added to the original Fricke polyvinyl alcohol-glutaraldehyde-xylenol orange (FPGX) hydrogel dosimeter system to make a more stable FPGX hydrogel three-dimensional dosimeter in this paper. Polyvinyl alcohol was used as a substrate, which was combined with Fricke solution. Various concentrations of Glc were tested with linear relevant fitting for optimal hydrogel production conditions. The effects of various formulations on the stability and sensitivity of dosimeters were evaluated. The results indicated that D-(+)-Glc, as a free radical scavenger, had a great effect on stabilizing the dose response related to absorbency and reducing the auto-oxidization of ferrous ions. A careful doping with Glc could slow down the color change of the dosimeter before and after radiation without any effect on the sensitivity of the dosimeter.

• 한국환경보건학회지
• /
• 제50권2호
• /
• pp.113-124
• /
• 2024

Background: The increasing need to minimize animal testing has sparked interest in alternative methods with more humane, cost-effective, and time-saving attributes. In particular, in silico-based computational toxicology is gaining prominence. Adverse outcome pathway (AOP) is a biological map depicting toxicological mechanisms, composed of molecular initiating events (MIEs), key events (KEs), and adverse outcomes (AOs). To understand toxicological mechanisms, predictive models are essential for AOP components in computational toxicology, including molecular structures. Objectives: This study reviewed the literature and investigated previous research cases related to AOP and in silico methodologies. We describe the results obtained from the analysis, including predictive techniques and approaches that can be used for future in silico-based alternative methods to animal testing using AOP. Methods: We analyzed in silico methods and databases used in the literature to identify trends in research on in silico prediction models. Results: We reviewed 26 studies related to AOP and in silico methodologies. The ToxCast/Tox21 database was commonly used for toxicity studies, and MIE was the most frequently used predictive factor among the AOP components. Machine learning was most widely used among prediction techniques, and various in silico methods, such as deep learning, molecular docking, and molecular dynamics, were also utilized. Conclusions: We analyzed the current research trends regarding in silico-based alternative methods for animal testing using AOPs. Developing predictive techniques that reflect toxicological mechanisms will be essential to replace animal testing with in silico methods. In the future, since the applicability of various predictive techniques is increasing, it will be necessary to continue monitoring the trend of predictive techniques and in silico-based approaches.

• Journal of Electrochemical Science and Technology
• /
• 제13권2호
• /
• pp.213-226
• /
• 2022

In the present study, the corrosion behavior of aluminum Al-7075 tempered (T-6 condition) alloy was evaluated by immersion testing and electrochemical testing in 1.75% and 3.5% NaCl environment at acidic, neutral and basic pH. The data obtained by both immersion tests and electrochemical corrosion tests (potentiodynamic polarization and electrochemical impedance spectroscopy tests) present that the corrosion rate of the alloy specimens is minimum for the pH=7 condition of the solution due to the formation of dense and well adherent thin protective oxide layer. Whereas the solutions with acidic and alkaline pH cause shift in the corrosion behavior of aluminum alloy to more active domains aggravated by the constant flux of acidic and alkaline ions (Cl^- and OH^-) in the media which anodically dissolve the Al matrix in comparison to precipitated intermetallic phases (cathodic in nature) formed due to T6 treatment. Consequently, the pitting behavior of the alloy, as observed by cyclic polarization tests, shifts to more active regions when pH of the solutions changes from neutral to alkaline environment due to localized dissolution of the matrix in alkaline environment that ingress by diffusion through the pores in the oxide film. Microscopic analysis also strengthens the results obtained by immersion corrosion testing and electrochemical corrosion testing as the study examines the corrosion behavior of this alloy under a systematic evaluation in marine environment.

• Mass Spectrometry Letters
• /
• 제10권4호
• /
• pp.112-116
• /
• 2019

In this study, a chloroform consumer chemical product (CCP) reference material (RM) is successfully developed, with potential to be used in the proficiency testing of hazardous compounds in CCPs for analysis and testing agencies. Validation experiments are rigorously conducted to evaluate whether the RM meets the requirements set by the ISO 13528 and ISO Guide 35, using a reliable GC/MS method for the analysis of chloroform. The obtained calibration plot linearity, limit of detection (LOD), and limit of quantitation (LOQ) are excellent. The developed RM meets the homogeneity and stability requirements; the between-unit (s_bb) and within-unit (s_wb) standard deviations are less than 2.5%, and the stability is found to be guaranteed for 50 days.

• Environmental Engineering Research
• /
• 제13권3호
• /
• pp.136-140
• /
• 2008

$TiO_2$ photocatalyst has been known to exhibit a notable disinfecting activity against a broad spectrum of microorganisms. A lot of commercial $TiO_2$ photocatalyst products have been developed for antimicrobial purposes. However, a standard method has not yet been proposed for use in testing antimicrobial activity. In this study, we developed a $TiO_2$ photocatalytic adhesion test method with film as the standard testing method for the evaluation of antimicrobial activity. This method was devised by modifying the previous antimicrobial products test method, which has been widely used, and considering the characteristics of $TiO_2$ photocatalytic reaction. The apparatus for testing the antimicrobial activity was composed of a Black Light Blue (BLB) lamp as UV-A light source, a Petri dish as the cover material, and a polypropylene film as the adhesion film. The standard $TiO_2$ photocatalyst sample, Degussa P25 $TiO_2$ - coated glass, could only be used once. The optimal initial concentration of the microorganism, proper light intensity, and light irradiation time were determined to be $10^6$ CFU/mL, 1.0 mW/$cm^2$, and 3 hr, respectively, for testing and evaluating antimicrobial activity on the $TiO_2$ surface.

• 대한기계학회논문집A
• /
• 제30권4호
• /
• pp.451-456
• /
• 2006

The process for reducing the weight of the structure is chiefly performed by the machine processing. But, increasing the weight for strength of welding zone and geometrical defect are occurred in machine processing. In this study, chemical milling is applied to reduce the weight of the cylinder. Before chemical milling is applied to the cylinder, specimen testing is performed. After the specimen testing, NaOH 15% is selected to perform the chemical milling. After the chemical milling, the velocity of reagent is 0.0016 mm/min and the thickness of cylinder is about 2.4 mm after chemical milling.

• 대한화학회지
• /
• 제10권3호
• /
• pp.133-135
• /
• 1966

Stainless steel 속에 들어 있는 chromium, nickel, 및 manganess를 原子吸光分光分析法(atomic absorption spectrophotomer)으로써 보다 빨리 定量할 수 있는 方法을 記述하였다. 現行되고 있는 濕式分析法과 比較한 結果 原子吸光分光分析法도 stainless steel의 分析에 믿을만한 한가지 分析法임을 알게 되었다.

• 비파괴검사학회지
• /
• 제33권6호
• /
• pp.511-518
• /
• 2013

Steam Generator (SG) tube, as a barrier isolating the primary coolant system from the secondary side of nuclear power plants (NPP), must maintain the structural integrity for the public safety and their efficient power generation. So, SG tubes are subject to the periodic examination and the repairs if needed so that any defective tubes are not in service. Recently, corrosion related degradations were detected in the tubes of the domestic OPR-1000 NPP, as a form of axially oriented outer diameter stress corrosion cracking (ODSCC). According to the studies on the factors causing the heat fouling as well as developing corrosion cracking, densely scaled deposits on the secondary side of the SG tubes are mainly known to be problematic causing the adverse impacts against the soundness of the SG tubes [1]. Therefore, the processes of various cleaning methods efficiently to dissolve and remove the deposits have been applied as well as it is imperative to maintain the structural integrity of the tubes after exposing to the cleaning agent. So qualification test (QT) should be carried out to assess the perfection of the chemical cleaning and QT is to apply the processes and to do ECT. In this paper, the chemical cleaning processes to dissolve and remove the scaled deposits are introduced and results of ECT on the artificial crack specimens to determine the effectiveness of those processes are represented.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.401-402
• /
• 2011