• 한국분말재료학회지
• /
• 제21권2호
• /
• pp.93-96
• /
• 2014

Cobalt coated tungsten carbide-cobalt composite powder has been prepared through wet chemical reduction method. The cobalt sulfate solution was converted to the cobalt chloride then the cobalt hydroxide. The tungsten carbide powders were added in to the cobalt hydroxide, the cobalt hydroxide was reduced and coated over tungsten carbide powder using hypo-phosphorous acid. Both the cobalt and the tungsten carbide phase peaks were evident in the tungsten carbide-cobalt composite powder by X-ray diffraction. The average particle size measured via scanning electron microscope, particle size analysis was around 380 nm and the thickness of coated cobalt was determined to be 30~40 nm by transmission electron microscopy.

• Bulletin of the Korean Chemical Society
• /
• 제3권4호
• /
• pp.149-152
• /
• 1982

A new convenient method for the reduction of carboxylic acids to the corresponding alcohols via acyloxyborohydrides was explored. Acyloxyborohydrides, prepared from the reaction of various carboxylic acids and sodium borohydride, underwent reduction to the corresponding alcohols readily by the addition of dimethyl sulfate or Lewis acids, such as boron trifluoride etherate and triphenyl borate, presumably through acyloxyboranes. By utilizing this procedure, aliphatic and aromatic acids are rapidly and quantitatively reduced to the corresponding alcohols in terahydrofuran either at room temperature (or at $65^{\circ}$). This procedure provides selective reduction of carboxylic acids in the presence of halogen, nitro, and heterocyclic rings such as furan and thiophene.

• 자원리싸이클링
• /
• 제18권5호
• /
• pp.12-18
• /
• 2009

고분자전해질 연료전지용 캐소드 촉매로서 화학환원법을 이용하여 20% Pt/C 제조하고 다양한 온도($300-600^{\circ}C$)열처리하여 산소환원반응을 평가하였다 $300-400^{\circ}C$에서 열처리한 20% Pt/C가 높은 산소환원반응 활성을 나타냈으며, 특히 $300^{\circ}C$에서 열처리한 촉매를 0.6V에서의 정전위를 측정한결과, 열처리하지 않은 촉매에 비해서 산소환원 반응 활성정도가 2배 높게 나타났다. TEM 및 XRD 분석을 이용하여 조사한 결과, 열처리 온도가 높아짐에 따라서 백금 입자 크기가 커지고 결정화도가 증가하는 것을 확인하였다. 이러한 결과에서 산소환원반응 활성을 위한 백금의 입자 크기와 결정화도가 $300^{\circ}C$에서 최적화되는 것으로 판단된다.

• Journal of Electrochemical Science and Technology
• /
• 제10권3호
• /
• pp.329-334
• /
• 2019

Sn-Cu alloy powders were prepared via a simple chemical reduction method for the negative electrode materials in lithiumion batteries. The addition of Cu can suppress the growth of Sn particles during synthetic process. Furthermore, the Cu also acts as a matrix phase against the volume change during cycling. With increasing amount of the Cu, a stable $Cu_6Sn_5$ phase formed in the Sn-Cu alloy and its cycle performance greatly enhanced depending on the Cu content. To promote the generation of the $Cu_6Sn_5$ phase, the synthesis temperature is raised to $60-100^{\circ}C$ from the ambient temperature. The Sn-Cu alloy powders prepared at elevated temperatures showed remarkable cycle performances. The Sn-Cu alloy powder obtained at $60^{\circ}C$ exhibited a significantly high volumetric capacity of over 2,000 mAh/cc at the 50th cycle.

• Korean Chemical Engineering Research
• /
• 제55권3호
• /
• pp.379-384
• /
• 2017

LiCl 용융염에서 희토류 산화물의환원율을 높이기 위해 NiO와 혼합하여 전해환원을실시하였다. Cyclic voltammetry (CV) 실험을 통해 LiCl 용융염 내에서 혼합산화물의 전기화학적 환원거동을 조사하였다. 혼합산화물로 제작된 환원전극과 그라파이트 산화전극 사이에 일정한 작동전압을 인가하여 이론전하량 대비 다양한 전하량을 공급한 후 중간생성물의 결정구조를 XRD를 이용하여 분석하였다. NiO 산화물을 첨가함으로써 전기전도성이 좋은 Ni 금속 주위로 희토류 산화물이 환원되어 RE-Ni 합금형태의 금속으로 완전히 전환되었으며, 합금을 형성하는 반응 메커니즘을 제시하였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3145-3150
• /
• 2010

Ruthenium catalysts modified by selenium have been introduced as alternative materials to Pt in Direct methanol fuel cells (DMFCs). RuSe nano-particles were synthesized on the Vulcan XC72R carbon supports via polyol method. The prepared catalysts were electrochemically and physically characterized by cyclic voltammetry (CV,) linear sweep voltammetry, methanol tolerance test, X-ray diffraction (XRD), Transmission electron microscopy (TEM), Energydispersive Spectrometer (EDS) and X-ray photoelectron spectroscopy (XPS). Increasing the Se concentration up to 20 at % increased the electro-catalytic activity for the oxygen reduction. By increasing Se amount, Ru metallic form on the surface was increased. The $Ru_{80}Se_{20}$/C catalysts showed the highest oxygen reduction reaction (ORR) activity and outstanding methanol tolerant property in half cell tests as well as single cell test.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2669-2674
• /
• 2009

Controlled reduction of silver alkylcarbamate complexes with hydrogen gas was investigated as a facile synthetic method for high concentrations of silver nanocolloids in organic solvent. Polyvinylpyrrolidone (PVP) was used to stabilize the silver colloids obtained from the chemical reduction. To determine optimum conditions for preparation of the stable and controlled silver colloids with the narrowest particle size and distribution, a large number of experiments were carried out involving variations in the concentrations of the silver 2-ethylhexylcarbamate (Ag-EHCB) complex, PVP, and 2-propanol. The initial colloid had a mean particle diameter between 5$\sim$50 nm, as measured by transmission electron microscopy, and exhibited a sharp absorption band in the UV region with a maximum size near 420 nm. After treatment with a reducing agent, the colloids were characterized by ultraviolet-visible spectroscopy, X-ray diffraction, and high-resolution transmission electron microscopy.

• 한국자기공명학회논문지
• /
• 제21권4호
• /
• pp.139-144
• /
• 2017

Ni(II) containing coenzyme F430 catalyzes the reduction of $CO_2$ in methanogen. Macrocyclic Ni(II) complexes with N,O shiff bases have been received a great attention since metal ions play an important role in the catalysis of reduction. The reducing power of metal complexes are supposed to be dependent on oxidoreduction state of metal ion and structural properties of macrocyclic ring moiety that can enhance electrochemical properties in catalytic process. Six different ${\alpha}$-oximinoketone compounds, precursor of macrocyclic ligands used in $CO_2$ reduction coenzyme F430 model complexes, were synthesized with yields over 90% and characterized by NMR. The molecular geometries of ${\alpha}$-oximinoketone analogues were fully optimized at Beck's-three-parameter hybrid (B3LYP) method in density functional theory (DFT) method with $6-31+G^*$ basis set using the ab initio program. In order to understand molecular planarity and substitutional effects that may enhance reducing power of metal ion are studied by computing the structure-dependent $^{13}C$-NMR chemical shift and comparing with experimental results.

• 한국분말재료학회지
• /
• 제18권3호
• /
• pp.244-249
• /
• 2011

Spherical nanosized cobalt powder with an average size of 150-400 nm was successfully prepared at room temperature from cobalt sulfate heptahydrate ($CoSO_4{\cdot}7H_2O$). Wet chemical reduction method was adopted to synthesize nano cobalt powder and hypophosphorous acid ($H_3PO_2$) was used as reduction agent. Both the HCP and the FCC Co phase were developed while $CoSO_4{\cdot}7H_2O$ concentration ranged from 0.7 M to 1.1 M. Secondary phase such as $Co(OH)_2$ and $CO_3O_4$ were also observed. Peaks for the crystalline Co phase having HCP and FCC structure crystallized as increasing the concentration of $H_3PO_2$, indicating that the amount of reduction agent was enough to reduce $Co(OH)_2$. Consequently, a homogeneous Co phase could be developed without second phase when the $H_3PO_2/CoSO_4{\cdot}7H_2O$ ratio exceeded 7.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.104-104
• /
• 2003

Geosynthetic Reinforcements - membrane drawn type, warp/knitted type, junction bonded type and composite type geogrids, strip type reinforcement - were used to compare the long-term perfor-mance by total factor of safety with reduction factors during service periods. To evaluate the reduction factors, wide-width tensile property, installation damage, creep deformation, chemical and biological degradation tests were performed. Long-term design strengths of geosynthetic reinforcements were calculated by using GRI standard Test Method GG4.