• Bulletin of the Korean Chemical Society
• /
• v.27 no.7
• /
• pp.986-990
• /
• 2006

As key nucleoside intermediates for the preparation of cyclic adenosine diphosphate ribose (cADPR, 1) analogues, 8-alkyl-2' (or 3')-azido(or amino)-adenosine derivatives (16-19) were successfully prepared by alkylating selectively protected adenosine derivatives (12, 13) via Pd(0) catalyzed cross-coupling reaction with tetraalkyltin reagents, followed by the sugar modification of these 8-alkyl-adenosine derivatives according to our precedent procedure. Compared to other precedent procedures, our 8-alkylation methodology using selectively TBDMS-protected 8-alkyl adenosine derivatives as starting materials will be utilized very conveniently to prepare highly functionalized adenosine analogues, which will be serve as key intermediates for the cADPR.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.303-308
• /
• 2010

Pseudo-first-order rate constants ($k_{obsd}$) have been measured spectrophotometrically for nucleophilic substitution reactions of 4-nitrophenyl benzoate (5a), 4-nitrophenyl 4-methoxybenzoate (5b), and 4-nitrophenyl 4-hydroxybenzoate (5c) with alkali metal ethoxides, $EtO^-M^+$ ($M^+=Li^+$, $Na^+$ and $K^+$) in anhydrous ethanol (EtOH) at $25.0{\pm}0.1^{\circ}C$. The plots of $k_{obsd}$ vs. [$EtO^-M^+$] exhibit upward curvatures in all cases, indicating that $M^+$ ions catalyze the reactions and ionpaired $EtO^-M^+$ species are more reactive than dissociated $EtO^-$. Second-order rate constants for reactions with dissociated $EtO^-$ and ion-paired $EtO^-M^+$ (i.e., $k_{EtO^-}$ and $k_{EtO^-M^+}$, respectively) have been calculated from ion-pair treatment for the reactions of 5a and 5b. However, such ion-pair treatment has failed to determine $k_{EtO^-}$ and $k_{EtO^-M^+}$ values for the reactions of 5c. It has been concluded that reactions of 5a and 5b are catalyzed by one metal ion, which increases electrophilicity of the reaction center through coordination on the carbonyl oxygen. In contrast, reactions of 5c have been suggested to involve two metal ions, i.e., the one coordinated on the carbonyl oxygen increases the electrophilicity of the reaction center while the other one associated on the phenoxy oxygen decreases the charge repulsion between the anionic reagents (i.e., $EtO^-$ and deprotonated 5c). It has been found that the rate equation derived from the mechanism involving two metal ions fits nicely to the kinetic results obtained for the reactions of 5c.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1783-1790
• /
• 2013

A simultaneous analytical method has been developed for the fluorimetric determination of haloacetonitriles (HANs) [dichloroacetonitrile (DCAN), trichloroacetonitrile (TCAN), dibromoacetonitrile (DBAN), haloacetamides [dichloroacetamide (DCAD), and trichloroacetamde (TCAD)] in drinking water by using the combined on-line perconcentration/reversed phase liquid chromatography (RPLC)-postcolumn detection system. This on-line perconcentration system was achieved by employing a precolumn packed with a commercial solid phase extraction (SPE) sorbent for the enrichment and purification of the target analytes. The haloacetonitriles and haloacetamides were separated on CN analytical column in a 7.5% methanol-0.02 M phosphate buffered mobile phase at pH 3. The column effluents were reacted with postcolumn reagents of ophthaldialdehyde (OPA) and sulfite ion at pH 11.5, to produce a highly fluorescent isoindole fluorophore, which were measured with a fluorescence detector. Under the optimized conditions for RPLC and the postcolumn derivatization system all of the coefficient of determination of the standard calibration curves for the target analytes were over 0.99 and had a linear range from 5 to 100 ${\mu}g/L$. The detection limits showed 1.6 ${\mu}g/L$ for DCAD, 0.1 ${\mu}g/L$ for TCAD, 0.6 ${\mu}g/L$ for DCAN, 1.6 ${\mu}g/L$ for TCAN and 1 ${\mu}g/L$ for DBAN, and the recoveries were ranged from 64 to 99% except for DCAD with precisions less than 4.9% in distilled water, and from 72(${\pm}4%$) to 116%(${\pm}2%$) in tap water.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1181-1187
• /
• 2003

Condensation of 4-cyano-5,6-dimethyl-3-pyridazinone 1 with aromatic aldehydes gave the novel styryl derivatives 2a-c. Refluxing of compound 2a with phosphorus oxychloride furnished 3-chloropyridazine derivative 3. Compound 3 was reacted with thiourea and produced pyridazine-3(2H)thione 4. Thieno[2,3-c]- pyridazines 5a-e were achieved by cycloalkylation of compound 4 with halocompounds in methanol under reflux and in the presence of sodium methoxide. Also, refluxing of compound 4 with N-substituted chloroacetamide in the presence of potassium carbonate afforded thienopyridazines 6a-e. Cyclization of compound 6 with some electrophilic reagents as carbon disulfide and triethyl orthoformate furnished the novel pyrimido[4',5':4,5]thieno[2,3-c]pyridazines 12 and 13a-c, respectively. Diazotisation of compound 6 with sodium nitrite in acetic acid produced the pyridazino[4',3':4,5]thieno[3,2-d][1,2,3]triazines 14a-c. Ternary condensation of compound 1, aromatic aldehydes and malononitrile in ethanol containing piperidine under reflux afforded the novel phthalazines 16a-c. Compound 3 was subjected to some nucleophilic substitution reactions with amines and sodium azide and formed the aminopyridazines 17a, b and tetrazolo[1,5-b]-pyridazine 19, respectively. The structures of the synthesized compounds were established by elemental and spectral analyses.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.1
• /
• pp.110-116
• /
• 2010

Lactic acid (LA) fermentation by Lactobacillus salivarius ATCC 11741 immobilized on loofa sponge (LS) was evaluated. To increase the surface area of LS for cell immobilization, $H_2O_2$ and chitosan were introduced as surface modifying reagents. Four chitosans of different molecular weights were separately coated on LS. All experiments were conducted in shaking flask mode at 100 rpm rotating speed and $37^{\circ}C$ with 5% $CaCO_3$ as a pH regulating agent. The effects of initial glucose concentration were investigated in the range of 20-100 g/l on LA fermentation by free cells. The results indicate that the maximum concentration of LA was produced with 50 g/l glucose concentration. The immobilized cell system produced 1.5 times higher concentration than free cells for 24 h of fermentation. Moreover, immobilized cells can shorten the fermentation time by 2-fold compared with free cells at the same level of LA concentration. At 1% (w/v) chitosan in 2% (v/v) acetic acid, the Yp/s and productivities of various molecular weights of chitosans were insignificantly different. Repeated batch fermentations showed 5 effective recycles with Yp/s and productivity in the range of 0.55-0.85 and 0.90-1.20 g/l.h, respectively. It is evident that immobilization of L. salivarius onto LS permits reuse of the system under these fermentation conditions. Scanning electron micrographs indicated that there were more intact cells on the chitosan-treated LS than on the untreated LS, thus confirming the effectiveness of the LS-chitosan combination when being utilized as a promising immobilization carrier for LA fermentation.

• Journal of Biosystems Engineering
• /
• v.41 no.2
• /
• pp.138-144
• /
• 2016

Purpose: Phosphorus is an essential element for water quality control. Excessive amounts of phosphorus causes algal bloom in water, which leads to eutrophication and a decline in water quality. It is necessary to maintain the optimum amount of phosphorus present. During the last decades, various studies have been conducted to determine phosphorus content in water. In this study, we present a comprehensive overview of colorimetric, electrochemical, fluorescence, microfluidic, and remote sensing technologies for the measurement of phosphorus in water, along with their working principles and limitations. Results: The colorimetric techniques determine the concentration of phosphorus through the use of color-generating reagents. This is specific to a single chemical species and inexpensive to use. The electrochemical techniques operate by using a reaction of the analyte of interest to generate an electrical signal that is proportional to the sample analyte concentration. They show a good linear output, good repeatability, and a high detection capacity. The fluorescence technique is a kind of spectroscopic analysis method. The particles in the sample are excited by irradiation at a specific wavelength, emitting radiation of a different wavelength. It is possible to use this for quantitative and qualitative analysis of the target analyte. The microfluidic techniques incorporate several features to control chemical reactions in a micro device of low sample volume and reagent consumption. They are cheap and rapid methods for the detection of phosphorus in water. The remote sensing technique analyzes the sample for the target analyte using an optical technique, but without direct contact. It can cover a wider area than the other techniques mentioned in this review. Conclusion: It is concluded that the sensing technologies reviewed in this study are promising for rapid detection of phosphorus in water. The measurement range and sensitivity of the sensors have been greatly improved recently.

• Applied Biological Chemistry
• /
• v.40 no.4
• /
• pp.277-282
• /
• 1997

Acetolactate synthase (ALS) was partially purified from Escherichia coli MF2000/pTATX containing Arabidopsis thaliana ALS gene. The partially purified ALS was examined for its sensitivity toward various modifying reagents such as iodoacetic acid, iodoacetamide, N-ethylmaleimide (NEM), 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB), p-chloromercuribenzoic acid (PCMB), and phenylglyoxal. It was found that PCMB inhibited the enzyme activity most strongly followed by DTNB and NEM. Since iodoacetic acid did not compete with substrate pyruvate, it appeared that cysteine is not involved in the substrate binding site. On the other hand, the substrate protected the enzyme partly from inactivation by phenylglyoxal, which might indicate interaction of arginine residue with the substrate. The partially purified enzyme was inhibited by end products, valine and isoleucine, but not by leucine. However, the ALS modified with PCMB led to potentiate the feedback inhibition of all end products. Additionally, derivatives of pyrimidyl sulfur benzoate, a candidate for a new herbicide for ALS, were examined for their inhibitory effects.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.179-187
• /
• 1992

Poly(styrene-co-maliec anhydride) was reacted with aromatic amines such as aniline, p-toluidine, and p-chloroaniline in 10% (w/w) DMF solution to convert maleic anhydride units into maleimides. Optimum reaction conditions for cyclodehydration step of imide ring formation were : (a) reaction temp. of $80^{\circ}C$ (b) mole ratios of cyclodehydration agents : anhydride units in SMA/acetic anhydride/sodium acetate/triethyl amine= 1.0/2.0/0.2/1.1. $T_g$of SMI(imide modified SMA) was increased with increasing degree of imidization, but $T_g$leveled off in the early stage of imide content. And $T_g$of SMI was increased with the following order of amines used for imidization reagents : aniline < p-toluidine < p-chloroaniline.

• Microbiology and Biotechnology Letters
• /
• v.13 no.3
• /
• pp.173-178
• /
• 1985

Extracellular amylase from tile filtrate of the submerged culture of Ganoderma lucidum was partially purified by ammonium sulfate precipitation and its properties were studied. The optimum pH and temperature of the enzyme activity were 5.5 and 5$0^{\circ}C$. respectively. This enzyme was most stable at pH 5.0 and stable up to 3$0^{\circ}C$, but it lost completely the activity when it was treated at 6$0^{\circ}C$ for 10 min. The enzyme was activated by the addition of M $n^{++}$, $C^{++}$ and C $u^{++}$, but inhibited by H $g^{++}$, A $g^{++}$ And various enzyme inhibitors and chemical reagents did not affect the enzyme activity. The enzyme hydrolyzed the boiled amylaceous polysaccharides, but it hydrolyzed raw starches very slowly. The activation energy of the enzyme for soluble starch was calculated and found to be 7.06 Kcal per mole. The Km values of the enzyme for soluble starch, amylose, amylopectin and glycogen were 0.16, 0.37, 0.19, and 0.16mg/$m\ell$, respectively. Maltose was found to inhibit the enzyme activity and kinetic analysis revealed a competitive type of inhibition.n.n.n.n.n.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.198-198
• /
• 2011

Organocatalysis is a relatively new and popular area within the field of chiral molecule synthesis. It is one of the main branches of enantioselective synthesis with enzymatic and organometallic catalysis. In recent years, immense high quality studies on catalysis by chiral secondary amines were reported. These progresses instantly led to different organocatalytic activation concepts, so thousands of researchers from academia and the chemical industry are currently involved in this field and new ideas, new approaches, and creative thinking have been rapidly emerged. Organocatalysts, some of which are natural products, appear to solve the problems of metal catalysts. Compared to metal-based catalysis, they have many advantages including savings in cost, time, and energy, easier experimental procedure, and reduction of chemical waste. These benefits originate from the following factors. First, organocatalysts are generally stable in oxygen and water in the atmosphere, there is no need for special equipments or experimental techniques to operate under anhydrous or anaerobic conditions. Second, organic reagents are naturally available from biological materials as single enantiomers that they are easy and cheap to prepare which makes them suitable for small-scale to industrial-scale reactions. Third, in terms of safety related catalysis, small organic molecules are non-toxic and environmentally friendly. Therefore, the purpose of this research is to develop novel synthetic methods and design for various organocatalyst. Furthermore, it is expected that these organocatalysts can be applied to a variety of asymmetric reactions and study the transition state of these reactions using a metal sulface. Here, we report the synthesis of unprecedented organocatalysts, proline and pyrrolidine derivatives with quaternary carbon center.