• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.6
• /
• pp.613-624
• /
• 2005

In this study, we investigated the characteristic of volatile organic compounds (VOCs) concentrations in Shiwha area, which were measured using the Open-path FTIR Gas Analyzer. The passive samplers were set for a certain period of time to obtain the average concentration of toluene, ethylbenzene, o-xylene and styrene. In addition, VOCs concentration contour maps were constructed using the Tecplot program to illustrate the VOCs concentration distribution. The residential area showed higher concentrations than the industrial area. And the summer had higher concentration value than the winter. Also, we confirmed that the VOCs concentrations ranged from 2 to several tens ppb in the vicinity of an industry than diffused VOC concentration, whereas those ranged from 0 to 5 ppb in most other areas. It was conferred that the wind change with seasons significantly affects the distribution of VOCs concentrations such as a northwesterly wind in the winter or a southwestern wind in the summer.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.6
• /
• pp.382-384
• /
• 1988

The explicit form of time correlation function between fluctuating concentrations is obtained for the model of metabolic system with negative feedback near a stable(or marginally stable) steady state.

• Geomechanics and Engineering
• /
• v.16 no.4
• /
• pp.375-384
• /
• 2018

Unconfined compressive strength (UCS) of high plasticity clayey soil mixed with 5 and 10 % of Portland cement and four chemical agents such as sodium hexametaphosphate, aluminum sulfate, sodium carbonate, and sodium silicate with 0, 5, 10, and 20% concentrations was comparatively evaluated. The individual and combined effects of the cement and chemical agents on the UCS of the soil mixture were investigated. The strength of the soil-cement mixture generally increases with increasing the cement content. However, if the chemical agent is added to the mixture, the strength of the cement-chemical agent-soil mixture tends to vary depending on the type and the amount of the chemical agent. At low concentrations of 5% of aluminum sulfate and 5% and 10% of sodium carbonate, the average UCS of the cement-chemical agent-soil mixture slightly increased compared to pure clay due to increasing the flocculation of the clay in the mixture. However, at high concentrations (20%) of all chemical agents, the UCS significantly decreased compared to the pure clay and clay-cement mixtures. In the case of high cement content, the rate of UCS reduction is the highest among all cement-chemical agent-soil mixtures, which is more than three times higher in comparison to the soil-chemical agent mixtures without cement. Therefore, in the mixture with high cement (> 10%), the reduction of the USC is very sensitive when the chemical agent is added.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.651-654
• /
• 2016

A number of accidents relating to highly toxic hydrogen fluoride (HF) or hydrofluoric acid (HA) release have occurred over fast few decades in Korea. Thus, this study was conducted to investigate the fluoride (F) concentrations in paddy soil and brown rice from 2 different areas where the soils were exposed to HF and HA. In the first case, the HF leakage accident that occurred in 2012 affected the surrounding soils and crops and consequently, crops (rice) affected by HF were unavailable for forage even though F did not accumulate in the soil. For example, at the time of accident, F concentrations in brown rice samples were $33.0-1,395mg\;kg^{-1}$, while F concentrations in soil samples were $155-295mg\;kg^{-1}$ which were less than the Korean standard guideline values of $400mg\;kg^{-1}$. However, after a year, F concentrations in brown rice were observed below the detection limit ($1mg\;kg^{-1}$), although F concentrations in soils were similar with those in 2012. Also, large amounts of wastewater discharges containing HA occurred in 2013 and some agricultural soils exceeded the Korean standard guideline values for F ($400mg\;kg^{-1}$), but soil-plant F transfer was not observed. In conclusion, it was observed that soil to plant transfer of F is unlikely although HF and HA as gas or liquid form can cause direct damage to plants.

• Geomechanics and Engineering
• /
• v.17 no.5
• /
• pp.465-473
• /
• 2019

Biocementation due to the microbially induced calcium carbonate precipitation (MICP) process is a potential technique that can be used for soil improvement. However, the effect of biocementation may be affected by many factors, including nutrient concentration, bacterial strains, injection strategy, temperature, pH, and soil type. This study investigates mainly the effect of chemical concentration on the formation of calcium carbonate (e.g., quantity, size, and crystalline structure) and unconfined compressive strength (UCS) using different treatment time and chemical concentration in the biotreatment. Two chemical concentrations (0.5 and 1.0 M) and three different treatment times (2, 4, and 8 cycles) were studied. The effect of chemical concentrations on the treatment was also examined by making the total amount of chemicals injected to be the same, but using different times of treatment and chemical concentrations (8 cycles for 0.50 M and 4 cycles for 1.00 M). The UCS and CCC were measured and scanning electron microscopy (SEM) analysis was carried out. The SEM images revealed that the sizes of calcium carbonate crystals increased with an increase in chemical concentrations. The UCS values resulting from the treatments using low concentration were slightly greater than those from the treatments using high concentration, given the CCC to be more or less the same. This trend can be attributed to the size of the precipitated crystals, in which the cementation efficiency increases as the crystal size decreases, for a given CCC. Furthermore, in the high concentration treatment, two mineral types of calcium carbonate were precipitated, namely, calcite and amorphous calcium carbonate (ACC). As the crystal shape and morphology of ACC differ from those of calcite, the bonding provided by ACC can be weaker than that provided by calcite. As a result, the conditions of calcium carbonate were affected by test key factors and eventually, contributed to the UCS values.

• New & Renewable Energy
• /
• v.17 no.3
• /
• pp.8-15
• /
• 2021

In this study, we assessed the effect of vitamin components (such as biotin, thiamine-HCl, and folic acid) on microorganism microbial growth and ethanol production was examined to enhance increase the ethanol concentration in the Clostridium autoethanogenum culture process using syngas as a sole carbon source. Biotin and folic acid concentrations of 0.2, 2, 20, and 100 ㎍/L were used in the culture experiments at 0.2, 2, 20, and 100 ㎍/L concentrations. The maximum ethanol concentrations of 2.81 g/L and 3.12 g/L were obtained by adding at 0.2 ㎍/L biotin and folic acid, respectively. Moreover, Thiaminethiamine--HCl at concentrations of 0.5, 5, 50, and 250 ㎍/L were was examined evaluated to in the culture experiments. The maximum ethanol concentration of 2.84 g/L was observed at 0.5 ㎍/L of thiamine--HCl. As a resultThus, the optimized concentrations of biotin, thiamine--HCl, and folic acid were determined at 0.2, 0.5, and 0.2 ㎍/L, respectively, for enhancing increasing the ethanol production. In conclusion, the maximum ethanol production was obtained by adding the minimal concentration of vitamins in C. autoethanogenum culture.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.519-527
• /
• 2004

Stable poly(methyl methacrylate-co-divinylbenzene) (poly(MMA-co-DVB)) microspheres were prepared by precipitation polymerization using acetonitrile as the main medium under various polymerization conditions, including modifications of the agitation speed, monomer and initiator concentrations, DVB content in the monomer mixture, and the use of various cosolvents. Gentle agitation was required to obtain smooth spherical particles. The individually stable microspheres were obtained at monomer concentrations of up to 15 vol% in an acetonitrile medium. The number-average diameter increased linearly with respect to increases in the monomer and initiator concentrations. We found, however, that the uniformity of the microspheres was independent of the variation of the polymerization ingredients because nuclei formation was solely influenced by the crosslinking reaction of the monomers. We obtained higher yields for the polymerization at higher concentrations of monomer and initiator. The concentration of DVB in the monomer mixture composition played an important role in determining not only the size of the microspheres but also the yield of the polymerization. In addition, although we employed various cosolvents as the polymerization medium, we found that acetonitrile/2-methoxyethanol was the only system that provided spherical particles without coagulation. This finding indicates that the precipitation polymerization is strongly dependent on the solvent used as the medium.

• Journal of Environmental Science International
• /
• v.4 no.3
• /
• pp.133-133
• /
• 1995

A comparative study on the chemical compositions of precipitations from February 1993 to April 1993 in Sungnam city of Kyunggi province, Inchon city, Kangneung city of Kangwon province, and Chongwon-gun of Chungbuk province has been performed. The metal cation and anion concentrations were measured by atomic absorption spectrometer and ion liquid chromatography, respectively. pH/Ion meter and direct nesslerization method were used for the concentration measurements of $H^+$ and $NH^{4+}$ ions, respectively. The quantitative orders of the cation and anion average concentrations, correlation coefficients between the ion concentrations, and pH values are used for chemical analysis on the environmental pollution and pollutant sources in the urban, surburban, seaside, and rural areas of the Korean Peninsula.

• Fisheries and Aquatic Sciences
• /
• v.6 no.2
• /
• pp.74-80
• /
• 2003

Two cellular biomarker parameters of the farmed Pacific oyster Crassostrea gigas were studied in vivo and in vitro after exposure to concentrations of polychlorinated biphenyls in terms of neural red uptake (NRU) and lysozyme activity. The oysters exposed in vivo to the xenobiotic concentrations, 0, 30, 90, and 180 ng/g for 14 days, enhanced hemocyte NRU with occasional significant differences (P<0.05), depending on the chemical concentration and duration. An adverse tendency was manifest in the lysozyme activities both in the hemocyte and serum of the oyster treated with the chemical in a same manner, rendering these two cellular parameters as biomarker candidates against the chemical. The oysters exposed in vitro to the chemical concentrations, 0, 1, 5, 10, 100, 1,000, and 10,000 ng/g for 24 hrs at $10^{\circ}C$ showed a similar tendancy as those exposed in vivo to the chemical. Unlike in vivo response, however, the in vitro NRU was first influenced by very low concentration of the chemical. In in vitro results, marked but not significant increase of hemocyte NRU was noticed at the chemical concentration of 5 ng/g, where the value was almost as high as those exposed to higher chemical concentrations, up to 10,000 ng/g. An unusual result was observed in the in vitro lysozyme activity of hemocyte in which significant decrease was first noticed at the chemical concentration of 100 ng/g.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.738-743
• /
• 2012

Topographic conditions of agricultural fields work as a important factor to identify different soil properties. This study was conducted to investigate the selected soil chemical properties and the concentrations of heavy metals, Cd, Cr, Pb, Cu, Ni, and Zn, in the paddy fields of different topographic areas at four year intervals from 1999 to 2011. Three-hundred soil sampling sites in the paddy fields were selected from the different topographic areas that were local valley and fans, fluvio-marine deposits, alluvial plains, and diluvial terraces. The mean values of soil pH ranged 5.7~5.8 that were within optimal range for rice cultivation. The mean values of other properties such as soil organic matter (SOM) content, the concentrations of exchangeable cations, $K^+$, $Ca^{2+}$, and $Mg^{2+}$, and available silicate concentration were lower or close to the optimal values, but the mean concentrations of available phosphorus were exceeded the range of optimal value, $80{\sim}120mg\;kg^{-1}$, in many paddy fields. In particular, The concentrations of available phosphorus in the paddy fields of local valley and fans, alluvial plains, and fluvio-marine plains were mostly declined. However, in diluvial terrace areas, the phosphorus concentrations unexpectedly increased; furthermore, they were significantly higher than those in other topographic areas. The mean concentrations of 0.1 M HCl-extractable heavy metals, Cd, Cr, Pb, Cu, Ni, and Zn, in the paddy fields were slightly and gradually declined during the study years, but the Pb concentrations were not statistically changed. In addition, the concentrations of heavy metals were widely ranged depending on the different sampling sites. Nevertheless, the concentrations of heavy metals were significantly lower than the levels of Soil Contamination Warning Standard (SCWS) for agricultural lands (1-region) presented in Soil Environment Conservation Law (SECL).