• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.264-269
• /
• 2022

The present study investigated effects of microbial additives on the floor of Hanwoo steer manure in barn. The treatment following: without additives (CON); additives (AMA). Each treatment used 3 barns as replication and each barn contained 5 Hanwoos. The Hanwoo steer manure in barns was sub-sampled from 5 sides of pen at 0, 4 and 12 weeks. The sub-samples were used for analyses of chemical compositions, microbial counts, gas emissions and compost maturity. The concentrations of moisture, organic matter, total nitrogen and carbon-to-nitrogen (C/N ratio) of Hanwoo steer manure before the microbial additives were each 59.1%, 83.2%, 1.78% and 50.0%, respectively. The counts of lactic acid bacteria, Yeast, Bacillus subtilis, and Escherichia coli (E. coli) were each 5.94, 6.83, 7,28 and 5.52 cfu/g, but Salmonella was not detected. The ammonia-N gas was 4.67 ppm, but hydrogen sulfide gas was not detected. After 4 weeks, moisture, organic matter, total nitrogen, pH and yeast count were lowest (p<0.05). The lactic acid bacteria, yeast, Escherichia coli (E. coli) and ammonia-N gas were not effects of microbial additives. All treatments was not detected at Salmonella count and hydrogen sulfide emission, and compost maturity was completed. After 12 weeks, the lactic acid bacteria and Bacillus subtilis were highest in AMA, while moisture, yeast and E. coli were lowest (p<0.05). The ammonia-N gas was not effect by microbial additive. Salmonella and hydrogen sulfide emission were not detected in all treatments, and compost maturity was completed. Therefore, in present study, the microbial additive did not affect of gas and compost maturity, but the pathogenic microorganism such as E. coli, were inhibited by microbial additives.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.4069-4074
• /
• 2010

Phase change of calcium carbontae crystals in crystallization of precipitated calcium carbonate was researched by adding additives such as ethylenediaminetetraacetic acid(EDTA), diethylenetriaminepentaacetic acid(DTPA), citric acid(CIT) and pyromellitic amid(PMA). At low temperature $20^{\circ}C$, calcite crystal was made. At high temperature $80^{\circ}C$, aragonite crystal was made without additives. At middle temperature $40^{\circ}C$ and $60^{\circ}C$, Aragonite crystal also made by adding EDTA, DTPA. The crystal growth of Aragonite was retarded by the presence of CIT, PMA and the single phase of calcite was made. It was found that additives were important factors to make the single phase of calcium carbonate.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.6
• /
• pp.625-630
• /
• 2010

This study aims to examine the possible use of heavy oil fly ash as raw material for deodorization panels by adding additives such as activated carbon and diatomite during deodorization panel manufacturing process and improving the performance of formaldehyde and toluene elimination.The recycled heavy oil flyash deodorization panel to be used either of them as additives removed more than 93% of formaldehyde and more than 97% of toluen but the compressive strength was decreased 27 to 63%. In an experiment to be used both additives, Whereas, the panel to include activated carbon 5% and diatomite 5% removed 84% against formaldehyde and 96% against toluen, and the compressive strength was increased 32% better than standard panel. Therefore it could be confirmed that the recycled heavy oil flyash deodorization panel is increased the compressive strength and the removal efficiency against harmful chemical substances by using the additives mixture.

• Tribology and Lubricants
• /
• v.4 no.1
• /
• pp.43-55
• /
• 1988

A Study on the effect of the additives in lubricating oil was investigated on the basis of the thermal activated wear theory in terms of their wear behaviours, using four ballwear machine. The sample oils, which included diethyl-3, 5-di-t-butyi-4-hydroxy-benzyl phosphonate (DEP), ZDDP and TCP additives respectively, showed distinct wear characteristics depending upon the bulk oil temperature and the sliding velocity. The newly synthesized additive, viz., DEP showed excellent antiwear performance cornpared with the conventional additives, ZDDP and TCP. On the basis of the experimental results, it is reduced that the wear mechanism of the conventional additives, viz., ZDDP and TCP is the protective film formation and their antiwear capability is depending upon the shearing strength of the film formed. On the other hand, the new additive, DEP showed that the secondary activation energy was much eliminated and so, the thermal instability was reduced by the hydrogen scavenging reaction of the new additive, which was virtually an endothermic reaction process.In conclusion, a new concept of antiwear mechanism is estabilished and testified. And new chemical, which showed the function of hydrogen and free radical scavenging role, is synthesized and introduced as the new, highly antiwear effective lubricating oil additive.

• Korean Journal of Clinical Pharmacy
• /
• v.23 no.2
• /
• pp.97-105
• /
• 2013

Background: This study was aimed to establish the systematic management methods of tar color additives used in Korea for drugs and quasi-drugs. Although tar color additives have been used in various areas, safety problems are continuously being reported by several studies. For that reason, major countries like US, Japan, Europe are trying to update the safety information of tar color additives and the related management methods, and Korea also need to complement them based on the updated information for their safer use. Method: This report includes the compared information of all legally used tar color additives of each country, such as color additive name, compound name and chemical abstracts service registry number. Conclusion: It is expected that these investigated results will be useful as the basic materials for proper management guidelines of tar color additives in Korea.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1603-1607
• /
• 2012

The effects of plating process on the surface coverage of the accelerator were investigated in terms of Cu superfilling for device metallization. When a substrate having 500 nm-wide trench patterns on it was immersed in an electrolyte containing poly (ethylene glycol) (PEG)-chloride ion ($Cl^-$)-bis(3-sulfopropyl) disulfide (SPS) additives without applying deposition potential for such a time of about 100s, voids were generated inside of the electrodeposit. In time-evolved electrochemical analyses, it was observed that the process (immersion without applying potential) in the electrolyte led to the build-up of high initial coverage of SPS-Cl on the surface, resulting in the fast saturation of the coverage. Repeated experiments suggested that the fast saturation of SPS-Cl failed in superfilling while a gradual increase in the SPS-Cl coverage through competition with initially adsorbed PEG-Cl enabled it. Consequently, superfilling was achievable only in the case of applying the plating potential as soon as the substrate is dipped in an electrolyte to prevent rapid accumulation of SPS-Cl on the surface.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.40-48
• /
• 2011

In this study, we investigated the usability of new powdered additives in the paperboard industry. We manufactured the powdered additives from peanut husks and garlic stems by grinding. The chemical composition, particle size, particle size distribution, and particle shape were investigated to identify the basic properties of the powdered raw materials. To determine the effect of the powdered additives on paper properties, handsheets were prepared by adding the powdered additives to the pulp slurry. The chemical composition, such as the contents of holocellulose, lignin, and ash, showed similar values to those of other biomass materials. The particles of peanut husk powder were irregularly shaped, smaller, and had a broader particle size distribution than those of the garlic stem powder, which had the fibril form. The particles of the two powdered raw materials showed a positioning of expansion in the fiber network, resulting in increased bulk and a loss of strength. Handsheets containing garlic stem particles were stronger than handsheets containing peanut husk particles. Finally, the new powdered additives are beneficial to the bulk of paperboard.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.531-536
• /
• 2007

The review is to introduce newly developed papermaking additives that has been applied to obtain a optimized papermaking production processes through paper quality and productivity improvements in recent years and near future. Not only the introduction of newly developed papermaking additives, but also the discussion on their application principles, methods, controls, inspections, and future development direction has been presented in the paper. The development of papermaking technology has focused on papermaking productivity, paper quality, and production effectiveness improvement through the optimization of the already developed technologies. It is thus concluded that even if noticeable innovative changes has not been in an area of papermaking additives, the development of several important papermaking additives in a technical aspect has been reported and improved the control and management of the papermaking system based on the development.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.734-740
• /
• 2016

The micron-sized indium zinc tin oxide (IZTO) particles were prepared by spray pyrolysis from aqueous precursor solution for indium, zinc, and tin and organic additives such as citric acid (CA) and ethylene glycol (EG) were added to aqueous precursor solution for indium, zinc, and tin. The obtained IZTO particles prepared by spray pyrolysis from the aqueous solution without organic additives had spherical and filled morphologies, whereas the IZTO particles obtained with organic additives had more hollow and porous morphologies. The micron-sized IZTO particles with organic additives were changed fully to nano-sized IZTO particles, whereas the micron-sized IZTO particles without organic additives were not changed fully to nano-sized IZTO particle after post-treatment at $700^{\circ}C$ for 2 hours and wet-ball milling for 24 hours. Surface resistances of micron-sized IZTO's before post-heat treatment and wet-ball milling were much higher than those of nano-sized IZTO's after post-heat treatment and wet-ball milling. From IZTO with composition of 80 wt. % $In_2O_3$, 10 wt. % ZnO, and 10 wt. % $SnO_2$ which showed a smallest surface resistance IZTO after post-heat treatment and wet-ball milling, thin films were deposited on glass substrates by pulsed DC magnetron sputtering, and the electrical and optical properties were investigated.

• Carbon letters
• /
• v.15 no.3
• /
• pp.187-191
• /
• 2014

This study reports on the influence of N-butyl-N-methylpyrrolidinium tetrafluoroborate ($PYR_{14}BF_4$) ionic liquid additive on the conducting and interfacial properties of organic solvent based electrolytes against a carbon electrode. We used the mixture of ethylene carbonate/dimethoxyethane (1:1) as an organic solvent electrolyte and tetraethylammonium tetrafluoroborate ($TEABF_4$) as a common salt. Using the $PYR_{14}BF$ ionic liquid as additive produced higher ionic conductivity in the electrolyte and lower interface resistance between carbon and electrolyte, resulting in improved capacitance. The chemical and electrochemical stability of the electrolyte was measured by ionic conductivity meter and linear sweep voltammetry. The electrochemical analysis between electrolyte and carbon electrode was examined by cyclic voltammetry and electrochemical impedance spectroscopy.