• Journal of Convergence Society for SMB
• /
• v.3 no.2
• /
• pp.51-56
• /
• 2013

Real-time processing of sensor data network, is one of the important factors. Each node in the detected data are required to be transmitted within a certain time since the accurate processing is possible. Thus, the data nodes are successfully delivered within a specified time, it is very important to check whether the. Recently more and more accurate real-time embedded systems are reliable and haejyeoseo been able to provide sophisticated services. Because of the inherent complexity of embedded systems in the physical world and the difficulty of predicting the difficulty of a safe design constraints on the runtime violation of system as to cause unexpected causes. Each node data in time detected by the time required to be passed in the appropriate processing is possible because the data transfer time in this paper, the monitoring of the sensor network through a node are allowed to exist within the time range and transmits data to the server Analysis of the data transfer time for checking whether the system was implemented. Implementation of the data transmission time to the process for analyzing and presenting, according to the procedure suggested by the transit time required for analysis a time difference analysis method, a data collection method and a data transmission time and transmission time calculating method presented.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.10
• /
• pp.493-498
• /
• 2017

Capsule endoscopy is specialized for the observation of small intestine that is difficult to access by general endoscopy. The diagnostic procedure through capsule endoscopy consists of three stages: examination of indicant, endoscopy, and diagnosis. At this time, key information needed for diagnosis includes indicant, lesions, and suspected disease information. In this paper, these information are defined as semantic features and the extracting process is defined as semantic-based analysis. It is performed in whole capsule endoscopy. First, several symptoms of patient are checked before capsule endoscopy to get some information on suspected disease. Next, capsule endoscopy is performed by checking the suspected diseases. Finally, diagnosis is concluded by using supporting information. At this time, some association are used to conclude diagnosis. For example, there are the disease association between the symptom and the disease to identify the expected disease, and the anatomical association between the location of the lesion and supporting information. However, existing knowledge models such as MST and CEST only lists the simple term related to endoscopy and cannot consider such semantic associations. Therefore, in this paper, we propose association-based knowledge model for supporting diagnosis of capsule endoscopy. The proposed model is divided into two; a disease model and anatomical model of small intestine, interesting area(organs) of capsule endoscopy. It can effectively support diagnosis by providing key information for capsule endoscopy.

• Journal of Science and Technology Studies
• /
• v.2 no.1 s.3
• /
• pp.1-38
• /
• 2002

Recently KISTEP(Korea Institute of Science and Technology Evaluation and Planning) held an open forum for examining 'the Manuscript of National Science and Technology Standard Taxonomic System'. I submitted my opinion letter to the forum because I thought that the matter of setting the standard taxonomic system for Science and Technology is so closely related to the research concern of STS that it needs checking from the viewpoint of STS. This paper primarily focuses on making a criticism of and constructing an alternative to the mamuscript, but it goes so far as to ground the matter upon the STS viewpoint. I propose that we interpret an open forum related to science and technology as an example case of the community of inquiry. Further I try, standing in the context of learning to form a model of doing STS interdisciplinary research. In the context of decision I point out the problem with the 'scale' principle involved in categrizing criteria of the taxonomic system and argue that the problem leads to omitting STS from National Science and Technology Standard Taxonomic System although STS takes up science and technology themselves as its research concern proper. In the context or teaming I seek to set up a typical case study or STS. One of the typical STS research tasks is trying to construct a positive alternative to as well as make a criticism of a given suggestion, for clearer alternatives will, in him, provoke sharper criticisms or safer acceptances. I hope that the model in this paper will exemplify such an alternating procedure of criticism and acceptance.

• Journal of Acupuncture Research
• /
• v.36 no.4
• /
• pp.272-276
• /
• 2019

Background: The purpose of this study was to assess the accuracy and safety of procedures using ultrasound equipment for acupuncture treatment. Methods: A pilot, prospective randomized, single blinded, crossover clinical study on the accuracy and safety of ultrasound-guided Gyeontonghyeol (BP-LE6) acupuncture treatment was conducted. Patients (n = 13) with shoulder pain were randomly divided into 2 groups. During Visit 1, ultrasound-guided BP-LE6 acupuncture was administered to the experimental group. In the control group, patients received BP-LE6 acupuncture (without checking ultrasound images) by manipulating the ultrasound probe as if administering ultrasound-guided acupuncture. Visit 2 was arranged within 7-14 days and the remaining procedures, other than those administered in Visit 1, were performed. In both the experimental group and control group, the number of needle insertions, and time required for the treatment to result in the patients feeling de-qi was recorded. The numeric rating scale (NRS) score for shoulder pain was recorded before and after the acupuncture treatment. Results: The number of needle insertions was $5.31{\pm}3.50$ times in the experimental group, and $6.62{\pm}3.38$ times in the control group, however, there was no statistically significant difference between the groups (p > 0.05). The mean time required to perform the procedure was $151.54{\pm}48.59$ seconds in the experimental group and $86.69{\pm}37.17$ seconds in the control group, which was statistically significantly different (p < 0.05). The changes observed in numerical rating scale scores between groups were not statistically significantly different. Conclusion: Although there was no statistically significant difference, administering acupuncture using ultrasound guidance may lead to accurate needling with a reduced number of needle insertion attempts. A large-scale clinical study of better design should be conducted in the future.

• Journal of Intelligence and Information Systems
• /
• v.28 no.2
• /
• pp.57-74
• /
• 2022

Recently, artificial intelligence parking control systems have increased the recognition rate of vehicle license plates using deep learning, but there is a problem that they cannot determine vehicles with fake license plates. Despite these security problems, several institutions have been using the existing system so far. For example, in an experiment using a counterfeit license plate, there are cases of successful entry into major government agencies. This paper proposes an improved system over the existing artificial intelligence parking control system to prevent vehicles with such fake license plates from entering. The proposed method is to use the degree of matching of the front feature points of the vehicle as a passing criterion using the ORB algorithm that extracts information on feature points characterized by an image, just as the existing system uses the matching of vehicle license plates as a passing criterion. In addition, a procedure for checking whether a vehicle exists inside was included in the proposed system to prevent the entry of the same type of vehicle with a fake license plate. As a result of the experiment, it showed the improved performance in identifying vehicles with fake license plates compared to the existing system. These results confirmed that the methods proposed in this paper could be applied to the existing parking control system while taking the flow of the original artificial intelligence parking control system to prevent vehicles with fake license plates from entering.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.19-32
• /
• 2007

In Korea, there have been various methods of estimating groundwater recharge which generally can be subdivided into three types: baseflow separation method by means of groundwater recession curve, water budget analysis based on lumped conceptual model in watershed, and water table fluctuation method (WTF) by using the data from groundwater monitoring wells. However, groundwater recharge rate shows the spatial-temporal variability due to climatic condition, land use and hydrogeological heterogeneity, so these methods have various limits to deal with these characteristics. To overcome these limitations, we present a new method of estimating recharge based on water balance components from the SWAT-MODFLOW which is an integrated surface-ground water model. Groundwater levels in the interest area close to the stream have dynamics similar to stream flow, whereas levels further upslope respond to precipitation with a delay. As these behaviours are related to the physical process of recharge, it is needed to account for the time delay in aquifer recharge once the water exits the soil profile to represent these features. In SWAT, a single linear reservoir storage module with an exponential decay weighting function is used to compute the recharge from soil to aquifer on a given day. However, this module has some limitations expressing recharge variation when the delay time is too long and transient recharge trend does not match to the groundwater table time series, the multi-reservoir storage routing module which represents more realistic time delay through vadose zone is newly suggested in this study. In this module, the parameter related to the delay time should be optimized by checking the correlation between simulated recharge and observed groundwater levels. The final step of this procedure is to compare simulated groundwater table with observed one as well as to compare simulated watershed runoff with observed one. This method is applied to Mihocheon watershed in Korea for the purpose of testing the procedure of proper estimation of spatio-temporal groundwater recharge distribution. As the newly suggested method of estimating recharge has the advantages of effectiveness of watershed model as well as the accuracy of WTF method, the estimated daily recharge rate would be an advanced quantity reflecting the heterogeneity of hydrogeology, climatic condition, land use as well as physical behaviour of water in soil layers and aquifers.

• Journal of radiological science and technology
• /
• v.32 no.3
• /
• pp.335-341
• /
• 2009

Purpose : The medical imaging issuance is changed from conventional film method to Digital Compact Disk solution because of development on IT technology. However other medical record department's are undergoing identification check through and through whereas medical imaging department cannot afford to do that. So, we examine present applicant's recognition of private intelligence safeguard, and medical imaging issuance condition by CD & DVD medium toward various medical facility and then perform comparative analysis associated with domestic and foreign law & recommendation, lastly suggest standard for medical imaging issuance and process relate with internal environment. Materials and methods : First, we surveyed issuance process & required documents when situation of medical image issuance in the metropolitan medical facility by wire telephone between 2008.6.1$\sim$2008.7.1. in accordance with the medical law Article 21$\sim$clause 2, suggested standard through applicant's required documents occasionally - (1) in the event of oneself $\rightarrow$ verifying identification, (2) in the event of family $\rightarrow$ verifying applicant identification & family relations document (health insurance card, attested copy, and so on), (3) third person or representative $\rightarrow$ verifying applicant identification & letter of attorney & certificate of one's seal impression. Second, also checked required documents of applicant in accordance with upper standard when situation of medical image issuance in Kyung-hee university medical center during 3 month 2008.5.1$\sim$2008.7.31. Third, developed a work process by triangular position of issuance procedure for situation when verifying required documents & management of unpreparedness. Result : Look all over the our manufactured output in the hospital - satisfy the all conditions $\rightarrow$ 4 place(12%), possibly request everyone $\rightarrow$ 4 place(12%), and apply in the clinic section $\rightarrow$ 9 place(27%) that does not medical imaging issuance office, so we don't know about required documents condition. and look into whether meet or not the applicant's required documents on upper 3month survey - satisfy the all conditions $\rightarrow$ 629 case(49%), prepare a one part $\rightarrow$ 416 case(33%), insufficiency of all document $\rightarrow$ 226case(18%). On the authority of upper research result, we are establishing the service model mapping for objective reception when image export situation through triangular position of issuance procedure and reduce of friction with patient and promote the patient convenience. Conclusion : The PACS is classified under medical machinery that mean indicates about higher importance of medical information therefore medical information administrator's who already received professional education & mind, are performer about issuance process only and also have to provide under ID checking process exhaustively.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.86-91
• /
• 2009

Purpose: The whole body scan in Nuclear Medicine is a widely accepted examination and procedure. Especially, it is mainly used in bone, I-131, MIBI, and HMPAO WBC scans. The diverse uses of the whole body scan range from the HMPAO WBC scan with a speed of 13cm/min, to a whole body bone scan using the Onco. Flash technique with a speed of 30cm/min. The accuracy of table movement has a strong correlation with the image quality, and inaccuracy of speed could negatively affect the image quality. The purpose of this study is to evaluate the accuracy of the table movement while considering the influence of the age of the equipment and the variability in the weight of the patients. Material and Methods: The study was conducted using two of Seoul Asan Medical Center's SIEMENS gamma cameras which are commonly used in our whole body study. The first one is the oldest gamma camera, an ECAM plus (installed in 2000), and the last is brand new one, a SYMBIA T2 (installed in 2008). Three trials were conducted with the tables moving at a different speed each time; 10, 15 and 30 cm/min. The tables' speeds were measured by checking how long it took for the table to move 10cm, and this was repeated every 10cm until the table reached 100 cm. With an average body weight of the patients of about 60~70 kg, the table speed was measured with weights of 0 kg, 66 kg and 110 kg placed on the table, then compared among conditions. Results: The coefficient of variance (CV) of the ECAM plus showed 1.23, 1.42, 2.02 respectively when the table movement speeds were set at 10, 15, and 30 centimeters per minute. Under the same conditions, the SYMBIA T2 showed 1.23, 1.83 and 2.28 respectively. As table movement speed more, the variance of CV as the speed increases. When the patient body weight was set to 0, 66 and 110kg, the CV values of both cameras showed 0.96, 1.45, 2.08 (0 Kg), 1.32, 1.72, 2.27 (66 Kg) and 1.37, 1.73, 2.14 (110 Kg). There was no significant difference (p>0.05) in 95 percent of confidence intervals and measured CV values were acceptable. However, the CV value of the SYMBIA T2 was relatively larger than the ECAM plus. Conclusion: The scan speed of the whole body scan is predetermined based on which examination is being performed. It is possible for the accuracy of the speed to be affected, such as the age of the equipment, the state of the bearings or the weight of a patient. These factors can have a negative impact on the diagnostic consistency and the image quality. Therefore, periodic quality control should be needed on the gamma cameras currently being used, focusing on the table movement speed in order to maintain accuracy and reproducibility.

• Journal of Distribution Science
• /
• v.10 no.2
• /
• pp.43-52
• /
• 2012

As experiential education services are growing, the need for proper management is increasing. Considering that adequate measures are an essential factor for achieving success in managing something, it is important for managers to use a proper system of metrics to measure the performance of experiential education services. However, in spite of this need, little research has been done to develop a valid and reliable set of metrics for assessing the quality of experiential education services. The current study aims to develop a multi-item instrument for assessing the service quality of experiential education. The specific procedure is as follows. First, we generated a pool of possible metrics based on diverse literature on service quality. We elicited possiblemetric items not only from general service quality metrics such as SERVQUAL and SERVPERF but also from educational service quality metrics such as HEdPERF and PESPERF. Second, specialist teachers in the experiential education area screened the initial metrics to boost face validity. Third, we proceeded with multiple rounds of empirical validation of those metrics. Based on this processes, we refined the metrics to determine the final metrics to be used. Fourth, we examined predictive validity by checking the well-established positive relationship between each dimension of metrics and customer satisfaction. In sum, starting with the initial pool of scale items elicited from the previous literature and purifying them empirically through the surveying method, we developed a four-dimensional systemized scale to measure the superiority of experiential education and named it "Experiential Education PERFormance" (EEPERF). Our findings indicate that students (consumers) perceive the superiority of the experiential education (EE) service in the following four dimensions: EE-empathy, EE-reliability, EE-outcome, and EE-landscape. EE-empathy is a judgment in response to the question, "How empathetically does the experiential educational service provider interact with me?" Principal measures are "How well does the service provider understand my needs?," and "How well does the service provider listen to my voice?" Next, EE-reliability is a judgment in response to the question, "How reliably does the experiential educational service provider interact with me?" Major measures are "How reliable is the schedule here?," and "How credible is the service provider?" EE-outcome is a judgmentin response to the question, "What results could I get from this experiential educational service encounter?" Representative measures are "How good is the information that I will acquire form this service encounter?," and "How useful is this service encounter in helping me develop creativity?" Finally, EE-landscape is a judgment about the physical environment. Essential measures are "How convenient is the access to the service encounter?,"and "How well managed are the facilities?" We showed the reliability and validity of the system of metrics. All four dimensions influence customer satisfaction significantly. Practitioners may use the results in planning experiential educational service programs and evaluating each service encounter. The current study isexpected to act as a stepping-stone for future scale improvement. In this case, researchers may use the experience quality paradigm that has recently arisen.