• Korean Journal of Culture and Social Issue
• /
• v.27 no.4
• /
• pp.629-659
• /
• 2021

This study compared the influences of Korean psycho-social experiences on emotional-distress(stress, depression, anxiety, anger) of Koreans between two-periods during COVID-19. First, an online survey was conducted among 600 participants between April 13, 2020 and 21, while WHO had declared the pandemic, and Daegu-Gyungbuk were declared as a special-disaster area. Second, an online survey was conducted among 482 participants out of 600 study participants from the first study during August 21 to September 2, while COVID-19 re-spreaded around the world, and total confirmed cases were over 1,000 for a week in Seoul-Gyeonggi province. Hierarchical-regression analysis was used to determine the influence of personal characteristics, fear and social constraints, relationship conflict and income-decreasing factors on stress, depression, anxiety, anger in the two-time points. Results suggest that gender, quality-of-life, 'frequent information-checking about COVID-19', 'fear of unpredictability' and 'difficulties on hospital treatment access' predicted distress(stress, depression, anxiety, anger) at both Time1 and 2. 'Difficulties with official schedule' predicted distress at Time 1, and age, vulnerability to infection and difficulties with personal schedules predicted distress(stress, depression, anxiety, anger) at Time 2. Based on the reseults, implications and recommendations were presented.

• Membrane Journal
• /
• v.32 no.5
• /
• pp.314-324
• /
• 2022

This study is aimed to design a membrane process that systematically removes contaminants including microplastics in sun-dried salt using a separation membrane. In this study, we selected the separation membrane material, pore size, and module suitable for the sun-dried salt fields, and proceeded with the experiments under the salt fields and laboratory conditions. A pilot plant was constructed and tested in our lab and in the actual saltern with the selected 200 kDa, 4 kDa ultrafiltration membranes, and 3 kDa nanofiltration membranes. Most of the impurities in the sea salt were 0.1 ㎛ in size, and more than 7 types of various microplastics were detected in the impurities. After that, as a result of checking the filtered water through the separation membrane process, no impurities were detected. As a result of comparing the existing sea salt component and the sea salt component prepared with separation membrane filtrate, impurities were effectively removed without change in the sea salt component.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.195-203
• /
• 2023

Purpose: This study intends to check validity of tools for awareness of Business Continuity through measurement and analysis on the sub factors of Business Continuity by employees of railway-related organizations. Method: Based on the preceding study, sub factors of the awareness of Business Continuity are divided into 7 and the total of 29 questions were delivered to employees of railway-related organizations for investigation and analysis through the online survey tool. Result: According to EFA result, the number of factors of awareness of Business Continuity based on the theoretical ground was reduced to 7 and the total coefficient of determination was 82.616%. Checking the questions by factor, all the questions were loaded as intended. Conclusion: Validity of measurement tools of Business Continuity whose sub factors are the Context of Organization, Leadership, Planning, Operation, Support, Performance evaluation, and Improvement for railway organizations were secured through the Exploratory Factor Analysis of this study. As for the further tasks, studies on the structural relationship among internalization of business continuity, organization effectiveness, learning support environment, etc are required.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.26 no.2
• /
• pp.37-42
• /
• 2022

Purpose Since 1985, the Korean society of nuclear medicine technology (KSNMT) has been engaged in academic activities related to nuclear medicine imaging. From 2017 to 2021, the papers published in the journal were classified by the specific fields to examine the trends in the research and the direction of nuclear medicine in comparison with the papers submitted to the Korean Society of Nuclear Medicine (KSNM) during the same period. Materials and Methods From 2017 to 2021, papers submitted to KSNMT and KSNM were classified and databaseization using the Excel program by submission type, examination equipment, and examination field. Through this data, the number of papers published in journals by year, the number of papers submitted by detailed fields, and key words by era were analyzed and compared. Results The papers included by journal was 57 KSNMT and 280 KSNM. The major large classification of equipment, PET, Planar and SPECT was 26.3%, 21.1%, 19.3% in the KSNMT, KSNM was 49.6%, 6.4%, and 9.3%, with 66.7% and 65.3%, respectively. the major medium classification of equipment, industrial safety, urogenital system, nervous system, and quality control accounted for 54.4% of the total papers of the total ratio in the KSNMT, while the medium classification of oncology, endocrine system, urogenital system, therapy, and nervous system accounted for 61.1% of KSNM. In the major small classification of image acquisition, improvement effect, and exposure management accounted for 70.2% in KSNMT, while the items of image acquisition, report, and improvement effect accounted for 60.7% in KSNM. The major keywords except for equipment-related keywords such as PET/CT, PET/MR, and SPECT were SUV, Planar Image, and Respiration Gating Method in KSNMT and Ga68, Thyroid, and Lymphoma in the KSNM. Conclusion When checking the last 5 years of submissions, we can see that KSNMT is mainly concerned with image acquisition using existing radiotracers, while KSNM has focused on new radiotracers such as ⁶⁸Ga, ¹⁷⁷Lu, etc., and new medical technologies of theranostic. It has been confirmed that more PET-related papers than other examination equipment will account for a greater number of papers, and it is believed that future submissions will also account for a higher proportion of PET-related papers than other equipment.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.26 no.2
• /
• pp.32-36
• /
• 2022

Purpose There are reports that the COVID-19 vaccine causes false positive uptake of axillary lymph nodes. Therefore, this paper intends to evaluate the change in SUVmax of axillary lymph nodes with the period after the COVID-19 vaccination. Materials and Methods In 134 breast cancer patients who were tested for ¹⁸F-FDG PET/CT at Severance hospital, 3.7 MBq/kg of ¹⁸F-FDG was intravenously injected and scanned for 2 minutes per bed after 60 minutes. The equipment was Discovery 600 (GE Healthcare, MI, USA). The period was divided into four groups, 0 to 2 weeks, 3 to 6 weeks, 7 to 10 weeks, and 11 weeks or more. SUVmax was measured after checking the uptake of axillary lymph nodes on the ipsilateral side of vaccination and the Kruskal-Wallis test was performed using SPSS Statistics 28 (IBM Corp., Armonk, NY, USA). Results From 0 to 2 weeks groups to 11 weeks or more group, the average of SUVmax was measured in the order of 5.52, 2.85, 1.82, and 1.7. As a result of the Kruskal-Wallis test, there was a significant difference between 0 to 2 weeks group from all other groups (P < 0.05), and there was no significant difference between the remaining three groups. Conclusion The SUVmax of axillary lymph nodes decreased over the period after the COVID-19 vaccination and no significant difference was found after 3 weeks of vaccination. Therefore, it is recommended to record COVID-19 vaccination information before examination.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.4
• /
• pp.33-44
• /
• 2023

Wind power is one of the most efficient and reliable energy sources in the transition to a low-carbon society. In particular, offshore wind power provides a high-quality and stable wind resource compared to onshore wind power while both present a higher installed capacity than other renewables. In this paper, we present our new program, the X-WIND program well suitable for the assessment of the substructure of offshore wind turbines. We have developed this program to increase the usability of analysis programs for offshore wind energy substructures by addressing the shortcomings of existing programs. Unlike the existing programs which cannot solely perform the substructure analyses or lack pre-post processors, our X-WIND program can complete the assessment analysis for the offshore wind turbines alone. The X-WIND program is embedded in AutoCAD so that both design and analysis are performed on a single platform. This also performs static and dynamic analysis for wind, wave, and current loads, essential for offshore wind power structures, and includes pre/post processors for designs, mesh developments, graph plotting, and code checking. With this expertise, our program enhances the usability of analysis programs for offshore wind energy substructures, promoting convenience and efficiency.

• Journal of the Korea Society for Simulation
• /
• v.18 no.4
• /
• pp.197-206
• /
• 2009

The medical information system is an effective medical diagnosis assistance system which offers an environment in which medial images and diagnosis information can be shared. However, this system can only stored and transmitted information without other functions. To resolve this problem and to enhance the efficiency of diagnostic activities, a medical image classification and retrieval system is necessary. The medical image classification and retrieval system can improve efficiency in a medical diagnosis by providing disease-related images and can be useful in various medical practices by checking diverse cases. However, it is difficult to understand the meanings contained in images because the existing image classification and retrieval system has handled superficial information only. Therefore, a medical image classification system which can classify medical images by analyzing the relation among the elements of the image as well as the superficial information has been required. In this paper, we propose the method for learning and classification of brain MRI, in which the superficial information as well as the spatial information extracted from images are used. The superficial information of images, which is color, shape, etc., is called low-level image information and the logical information of the image is called high-level image information. In extracting both low-level and high-level image information in this paper, the anatomical names and structure of the brain have been used. The low-level information is used to give an anatomical name in brain images and the high-level image information is extracted by analyzing the relation among the anatomical parts. Each information is used in learning and classification. In an experiment, the MRI of the brain including disease have been used.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.289-296
• /
• 2009

All over the world more and more attention is being paid to green management which enables environment-friendly sustainable development. To keep up with these global trends and in response to the government's "low carbon green growth" policy, many efforts are being made in the port and logistics in order to drastically reduce carbon emissions and save operating expenses. To this end, the engine power source of the cranes in the container terminal is being replaced with electricity from fossil fuel. Among those cranes, especially e-RTGC has been proved to be practical and excellent in its performance through many previous studies. However, no empirical study has yet been made on its introduction effects when e-RTGC has been introduced to the container terminal. In the meantime, however, many domestic container terminals have introduced e-RTGC, and so some data have been accumulated for further research. Under these circumstances, this study has tried to make an empirical study through the case study of D container terminal, checking the restriction factors to be considered at the time of eURTGC introduction, and analyzing its introduction effects and problems. We have high expectations that this study will provide key consideration factors and empirical analysis data to the decision makers who plan to introduce an e-RTGC system, and also will be used as a reference to the development direction of e-RTGC.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.67-67
• /
• 2003

It is crucial to minimize setup errors of a cancer treatment machine using a high energy and to perform precise radiation therapy. Usually, port film has been used for verifying errors. The Korea Cancer Center Hospital (KCCH) has manufactured digital electronic portal imaging device (EPID) system to verify treatment machine errors as a Quality Assurance (Q.A) tool. This EPID was consisted of a metal/fluorescent screen, 45$^{\circ}$ mirror, a camera and an image grabber and could display the portal image with near real time KIRAMS has also made the acrylic phantom that has lead line of 1mm width for ligh/radiation field congruence verification and reference points phantom for using as an isocenter on portal image. We acquired portal images of 10$\times$10cm field size with this phantom by EPID and portal film rotating treatment head by 0.3$^{\circ}$, 0.6$^{\circ}$ and 0.9$^{\circ}$. To check field size, we acquired portal images with 18$\times$18cm, 19$\times$19cm and 20$\times$20cm field size with collimator angle 0$^{\circ}$ and 0.5$^{\circ}$ individually. We have performed Flatness comparison by displaying the line intensity from EPID and film images. The 0.6$^{\circ}$ shift of collimator angle was easily observed by edge detection of irradiated field size on EPID image. To the extent of one pixel (0.76mm) difference could be detected. We also have measured field size by finding optimal threshold value, finding isocenter, finding field edge and gauging distance between isocenter and edge. This EPID system could be used as a Q.A tool for checking field size, light/radiation congruence and flatness with a developed video based EPID.

• Journal of Industrial Convergence
• /
• v.20 no.12
• /
• pp.195-202
• /
• 2022

Underground Geospatial Information Map Management System(UGIMMS) integrates various underground facilities in the underground space into 3D mesh data, and supports to check the 3D image and location of the underground facilities in the mobile app. However, there is a problem that it takes a long time to run in the app because various underground facilities can exist in some areas executed by the app and can be seen layer by layer. In this paper, we propose a deep learning-based K-means vertex clustering algorithm as a method to reduce the execution time in the app by reducing the size of the data by reducing the number of vertices in the 3D mesh data within the range that does not cause a problem in visibility. First, our proposed method obtains refined vertex feature information through a deep learning encoder-decoder based model. And second, the method was simplified by grouping similar vertices through K-means vertex clustering using feature information. As a result of the experiment, when the vertices of various underground facilities were reduced by 30% with the proposed method, the 3D image model was slightly deformed, but there was no missing part, so there was no problem in checking it in the app.