• 제목/요약/키워드: charcoal powder

검색결과 72건 처리시간 0.026초

한우 수송아지에 대한 황토, 일라이트, 올리고당, 활성탄 및 크롬 급여가 성장발육 및 면역기능에 미치는 영향 (Effect of Hwangto, Illite, Oligosacharides, Charcoal powder and Chromium picolinate on the Growth Performance and Immunity in Eary Weaned Hanwoo Calves)

  • 강수원;조창연;김준식;안병석;정하연;서국현
    • Journal of Animal Science and Technology
    • /
    • 제44권5호
    • /
    • pp.531-540
    • /
    • 2002
  • 한우 수송아지에 대한 육성기 항병력 증진물질 투여 효과를 구명하기 위하여 75일령에 이유된 한우수송아지 30두를 대상으로 사료내 항병력 증진물질 첨가 종류에 따라 6개 처리(T1: 관행사육, T2: 황토 2%첨가, T3: Illite 2% 첨가, T4: Oligosacharides 0.04% 첨가, T5: Charcoal powder 2% 첨가, T6: Chromium picolinate 0.1% 첨가)를 두어 3개월령부터 7개월령까지 120일간 사양시험을 실시한 결과, 처리구별 일당 증체량은 T3, T6, T4, T5, T2 및 T1이 각각 0.92, 0.90, 0.90, 0.88, 0.83 및 0.82kg으로 Illite 및 크롬은 이유직후 송아지의 성장발육에 영향을 미쳤으나 가공되지 않은 황토급여는 성장발육에 뚜렷한 효과가 없었다. 육성기 120일간 1일 평균 농후사료 섭취량 및 체중대비 섭취비율은 각각 3.91${\sim}$4.15kg, 평균 4.03kg 및 3.1${\sim}$3.31%, 평균 3.21%였고, 1kg 증체에 소요된 TDN 량은 3.20${\sim}$3.57kg, 평균 3.35kg으로 T5, T3, T6, T4, T2 및 T1 순으로 우수하였다. 송아지의 혈청 내 IgG 농도는 처리구별로 10.2${\sim}$11.6mg/$m\ell$ 내에서 변화하여 정상 축에서 볼 수 있는 범위 내에 있었지만, T3 및 T5는 개시시에 비해 각각 6.9 및 2.8% 증가하였으며, 질병발생은 처리구별로 뚜렷한 차이가 없었다. 이상과 같은 결과들로 볼 때, 점토광물인 Illite는 다른 항병력 증진물질과 마찬가지로 어린 송아지의 발육 및 사료이용성을 증진시키지만 가공되지 않은 황토의 급여는 발육 및 사료이용성에 뚜렷한 차이가 없는 것으로 나타났다.

참치자숙액을 이용한 분말엑기스의 제조 및 정미성분 (Processing of the Extract Powder Using Skipjack Cooking Juice and Its Taste Compounds)

  • 안창범;김형락
    • 한국식품과학회지
    • /
    • 제28권4호
    • /
    • pp.696-701
    • /
    • 1996
  • 참치통조림 업계에서 부산물로 얻어지는 자숙액을 효율적으로 이용하기 위해 효소가수분해하여 분말엑기스를 제조하고 제조된 분말엑기스의 정미성분을 검토하였다. 두부와 내장을 제거한 2kg이하의 참치 2.3톤을 $93-95^{\circ}C$에서 45분간 증자하여 유출되는 약 $6^{\circ}brix$의 자숙액을 효소처리(pH; 6.19, 온도; $50^{\circ}C$, 효소농도; 0.5%, 처리시간; 1시간)하였다 이를 $80-85^{\circ}C$에서 5분간 처리하여 효소를 실활시키고 활성탄을 가하여 감압, 여과한 다음 이 여액 500ml 분무건조하여 백색의 분말엑기스 18 g을 얻었다. 이 분말엑기스의 유리아미노산 함량은 2,711.5 mg/100g이었고 이중 taurine이 19.4%를 차지하여 가장 많았고 다음으로 glutamic acid (13.8%), phenylalanine (11.7%) 및 alanine (10.5%)의 순으로 많았다. 이들 4종의 아미노산이 전체 유리 아미노산의 55.4%를 차지하였다. 한편 구성 아미노산의 함량은 30,758.1 mg/100g이었으며 이중 glutamic acid가 13.1%로 가장 많았다. 핵산관련물질 중에서는 inosine이 $76.29\;{\mu}mole/g$으로서 양적으로 가장 많았다. 엑기스 질소중 양적으로 가장 많은 것은 핵산관련물질 질소로 전 엑스분 질소의 41.2%를 차지하였으며 다음으로 유리 아미노산 질소의 순이었다. TMAO와 TMA는 미량 존재하였으며, betaine은 72.2 mg/100g으로서 전엑스분 질소의 4.9%를 차지하였고, 총 creatinine은 전엑스분 질소의 3.5%을 차지하였다 omission test 결과 분말엑기스의 맛에는 유리 아미노산, 유기산, 핵산관련물질의 순으로 기여도가 높았고, 유리 아미노산은 지미의 주된 물질임과 동시에 자극성의 맛이나 신맛을 완화시키는 역할을 하는 것으로 판단되었다.

  • PDF

Culicoides arakawae의 실험실내 colonization (Experimental colonization of Culicoides arakawae in laboratory)

  • 최상호;주후돈;위성환;김기석;박근식
    • 대한수의학회지
    • /
    • 제33권3호
    • /
    • pp.471-478
    • /
    • 1993
  • Culicoides arakawae is a kind of the main blood sucking insects of domestic fowls and serves as a vector of Leukocytozoom caulleryi, the causative protozoon of chicken leukocytozoonosis. In this study, the complete life history of C arakawae was cycled by laboratory colonization. Adult midges were collected from various poultry farm by light trap. The laboratory colonization was performed under the conditions of constant temperature of $25{\pm}1^{\circ}C$ and relative humidity of 80% or above. The hatched larvae were cultured in larval medium consisted of rice field mud and activated charcoal powder. The surface of medium was continuously flowed with biologically conditioned water. The fine powder meal composed of pellet feed for mice and equal mount of yeast was supplied for feeding larvae at every 72 hours. The life cycle completed at $25^{\circ}C$ in 35~35 days ; the period of preoviposition, egg. larval and pupal stage was 2~3, 3~4, 28~30 and 3 days, respectively. The measurements of the eggs, the lst instar larvae, the 4th instar larvae and pupae was $36.28{\mu}m{\pm}1.95$, $13.58{\mu}m{\pm}0.72$, $4000{\mu}m{\pm}1.47$ and $219.95{\mu}m{\pm}6.25$ in $mean{\pm}S.D.$, respectively. In order to confirm experimental colonization of C arakawae in laboratory, the colonized adult midges were allowed to suck blood from chicken infected with L caulleryi. The oocysts and sporozoites could be identified in midguts and salivary grands of engorged midges at 72 hours after blood sucking.

  • PDF

Synthesis of Spherical Carbons Containing Titania and Their Physicochemical and Photochemical Properties

  • Oh, Won-Chun;Kim, Jong-Gyu;Kim, Hyuk;Chen, Ming-Liang;Zhang, Feng-Jun;Meng, Ze-Da;Choi, Jong-Geun;Zhang, Kan
    • 한국세라믹학회지
    • /
    • 제48권1호
    • /
    • pp.6-13
    • /
    • 2011
  • In this study, we used activated carbon (AC) and charcoal (CH) as carbon sources with $TiO_2$ powder to prepare spherical carbons containing titania (SCCT) by using phenolic resin (PR) as a bonding agent. The physicochemical characteristics of the SCCT samples were examined by BET, XRD, SEM, EDX, iodine adsorption and compressive strength. The photocatalytic activity was evaluated by measuring the removal efficiency of three kinds of organic dyes: methylene blue (MB), methyl orange (MO) and rhodamine B (Rh.B) under a UV/SCCT system. In addition, evaluation of chemical oxygen demand (COD) of piggery waste was done at regular intervals and gave a good idea about the mineralization of wastewater.

Properties of Porous SiC Ceramics Prepared by Wood Template Method

  • Ha, Jung-Soo;Lim, Byong-Gu;Doh, Geum-Hyun;Kang, In-Aeh;Kim, Chang-Sam
    • 한국세라믹학회지
    • /
    • 제47권4호
    • /
    • pp.308-311
    • /
    • 2010
  • Porous SiC samples were prepared with three types of wood (poplar, pine, big cone pine) by simply embedding the wood charcoal in a powder mixture of Si and $SiO_2$ at 1600 and $1700^{\circ}C$. The basic engineering properties such as density, porosity, pore size and distribution, and strength were characterized. The samples showed full conversion to mostly $\beta$-SiC with good retention of the cellular structure of the original wood. More rigid SiC struts were developed for $1700^{\circ}C$. They showed similar bulk density ($0.5{\sim}0.6\;g/cm^3$) and porosity (81~84%) irrespective of the type of wood. The poplar sample showed three pore sizes (1, 8, $60\;{\mu}m$) with a main size of $60\;{\mu}m$. The pine sample showed a single pore size ($20\;{\mu}m$). The big cone pine sample showed two pore sizes (10, $80\;{\mu}m$) with a main size of $10\;{\mu}m$. The bend strength was 2.5 MPa for poplar, 5.7 MPa for pine, 2.8 MPa for big cone pine, indicating higher strength with pine.

Optimization of Embryogenic Callus Induction and Plant Regeneration in Orchid Coelogyne cristata

  • Naing, Aung Htay;Lim, Ki-Byung
    • 원예과학기술지
    • /
    • 제29권3호
    • /
    • pp.260-266
    • /
    • 2011
  • An efficient protocol was established for high frequency somatic embryogenesis through a callus culture of Coelogyne cristata. The best frequency of callusing was obtained from a PLB segment (3-5 mm) cultured on MS medium supplemented with coconut water (CW) and a combination of both 3 $mg{\cdot}L^{-1}$ of 2,4-D and BA. When the calli were sub-cultured on the MS medium without any PGRs, the average number of somatic embryos were higher than those with PGRs treatment. NAA is the most critical factor among PGRs, which dramatically hindered for the formation of a somatic embryo. The efficacy of the addition of coconut powder (CP) for somatic embryogenesis was almost the same in all treatments. However, the number of somatic embryos formed distinctly depended on age of the callus. The somatic embryos converted into healthy plants with well-developed shoots on the same medium. Plantlets showed the best responses of root and shoot growth when transferred to $\frac{1}{2}$ MS medium containing 1.5 $g{\cdot}L^{-1}$ of activated charcoal. All plants with above 3.0-cm-high were successfully acclimatized in the greenhouse.

부소산성 출토 고대 철기유물에 대한 금속학적 연구 (Metallugical Study on the Iron Artifaets Ecavated from Buso Sangong)

  • 임선기;강대일;문환석;박동규;강성군
    • 보존과학연구
    • /
    • 통권13호
    • /
    • pp.37-58
    • /
    • 1992
  • Iron artifacts from Busǒ Sansǒng inffered to late Baikjae periodwere studied on the aspects of metallugy. These materials were the largest size ever since excavated. From the analytical results these artifacts were found to be pureiron system without impurities or hypo-eutectoid steel system in below 0.3% in carbon contents. From the content of phosphorus in the range of 0.03∼0.05% as aim purity it was shown that charcoal were used for making these iron artifacts from sponge iron not fusion method. By observing metallugical structure it was found that iron artifacts was manufactured by repetitive folding and hammering forging method and some by heating method for adding carbon with cool water. This method were to improve the quality of the soften steel to harden one. In addition to those above repetitive hammering method eliminated the nonferrous materials such as slag inclusion and remained relatively pure ferrite.

  • PDF

Highly Selective and Simple Zero and First Order Derivative Spectrophotometric Determination of Palladium by Using α-Benzilmonoxime in Triton X-100 Micellar Solution

  • Eskandari, Habibollah;Karkaragh, Gholamhassan Imanzadeh
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권12호
    • /
    • pp.1731-1736
    • /
    • 2003
  • The reaction of ${\alpha}$-Benzilmonoxime with palladium(II) produces a green complex in triton X-100 micellar media. Palladium has been determined using zero and first derivative spectrophotometric methods. The absorbances of Pd(II)- ${\alpha}$--benzilmonoxime complex at 441.8 and 677.0 nm in 0.10 M perchloric acid solution were monitored and linear working ranges of 0.3-12.0 and 0.7-20 ${\mu}$g mL$^{-1}$ with detection limits of 0.07 and 0.10 ${\mu}$g $mL^-1$ were obtained, respectively. Also, recoveries in the range of 92.8 to 100.1% and relative standard deviations in the range of 0.4 to 7.1% were obtained. First derivative spectrophotometry has also been applied for palladium determination under the optimum condition. The linear dynamic range of 0.2-24.0 ${\mu}$g $mL^{-1}$ palladium with relative standard deviations of 0.6-6.9% and recoveries in the range of 94.9-102.5% has been obtained by first derivative spectrophotometry. The method shows high selectivity because of the high concentration of acid used, which prevents formation of complexes of ${\alpha}$--benzilmonoxime with the other cations. The palladium complex formed was stable at least one day. The method was successfully applied to the determination of palladium in some synthetic palladium alloys and palladium-charcoal powder.

Synthesis and Characterization of Calcium Derivative Combined with High-Surface-Area Activated Carbon Composites for Fine Toxic Gas Removal

  • Areerob, Yonrapach;Nguyen, Dinh Cung Tien;Dowla, Biswas Md Rokon;Kim, Hyuk;Cha, Je-Woo;Oh, Won-Chun
    • 한국세라믹학회지
    • /
    • 제55권5호
    • /
    • pp.473-479
    • /
    • 2018
  • Highly toxic gases such as hydrogen sulfide ($H_2S$), carbon dioxide ($CO_2$), and ammonia ($NH_3$) are generated by both nature and human activities and affect human health. In this research, activated carbon combined with $Ca(OH)_2$ and $CaCO_3$ (AC-CO and AC-CC, respectively) were fabricated and applied in absorbing toxic gases from air pollutants. Activated charcoal powder was compressed in the form of pellets and used in the designated conditions. The optimum operating conditions and material properties, such as adsorption capacity, effect of weight ratio of the mixture, and hardness, have been investigated after combining with the calcium derivative. The good performance exhibited in this study suggests that this material is expected to be an effective and economically viable adsorbent for $NH_3$, $CO_2$, and $H_2S$ removal from the air system.