• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6C
• /
• pp.321-329
• /
• 2008

In this study, a series of column test as a way in order to make up for the weakness point of the conventional acceleration method were conducted to both propose the suction board drain method and grapes the specific improvement character of this method as a result of a sort of plastic drain board and a phase of vacuum pressure conditions. On this occasion, the study focused on computing the effective factors of the fittest Suction board drain method affected by each condition through confirming the settlement generated during the test, the water content reduction and stress increase effect occurred arising from the test, and the ratio of consolidation related to the improvement period. In accordance with the shape of core and that whether the core is attached to the filter(pocket or adhesion), the castle type of adhesion and the column type of pocket are more efficient than the others as a consequence of the test to find out the improvement effect depending on each drainage such as a castle type, coil type, harmonica type, column type of pocket and a castle of the adhesion. In case of the step suction pressure, the shorter the period of $-0.8\;kg/cm^2$ as a final step of the suction pressure is, the better the improvement is. In addition, the correlation between degree of consolidation per each suction pressure level and duration of application was drawn as a curve and the point of inflection on this curve was provided to determine the duration period to maximize the consolidation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.17
• /
• pp.1-44
• /
• 1974

These studies were made at Suwon in 1972 and at Suwon, Iri, and Kwangju in 1973 to investigate grain filling process and variation of grain quality of NB 68513 and Caprock as hard red winter wheat, Suke ＃169 as soft red winter wheat variety and Yungkwang as semi-hard winter variety, grown under-three different fertilizer levels and seeding dates. Other experiments were conducted to find the effects of temperature, humidity and light intensity on the grain filling process and grain quality of Yungkwang and NB 68513 wheat varieties. These, experiments were conducted at Suwon in 1973 and 1974. 1. Grain filling process of wheat cultivars: 1) The frequency distribution of a grain weight shows that wider distribution of grain weight was associated with large grain groups rather than small grain group. In the large grain groups, the frequency was mostly concentrated near mean value, while the frequency was dispersed over the values in the small grain group. 2) The grain weight was more affected by the grain thickness and width than by grain length. 3) The grain weight during the ripening period was rapidly increased from 14 days after flowering to 35 days in Yungkwang and from 14 days after flowering to 28 days in NB 68513. The large grain group, Yungkwang was rather slowly increased and took a longer period in increase of endosperm ratio of grain than the small grain group, NB 68513. 4) In general, the 1, 000 grain weight was reduced under high temperature, low humidity, while it was increased under low temperature and high humidity condition, and under high temperature and humidity condition. The effect of shading on grain weight was greater in high temperature than in low temperature condition and no definite tendency was found in high humidity condition. 5) The effects of temperature, humidity and shading on 1, 000 grain weight were greater in large-grain group, Yungkwang than in small grain group, NB 68513. Highly significant positive correlation was found between 1, 000 grain weight and days to ripening. 6) The 1, 000 grain weight and test weight were increased more or less as the fertilizer levels applied were increased. However, the rate of increasing 1, 000 grain weight was low when fertilizer levels were increased from standard to double. The 1, 000 grain weight was high when planted early. Such tendency was greater in Suwon than in Kwangju or Iri area. 2. Milling quality: 7) The milling rate in a same group of varieties was higher under the condition of low temperature, high humidity and early maturing culture which were responsible for increasing 1, 000 grain weight. No definite relations were found along with locations. 8) In the varieties tested, the higher milling rate was found in large grain variety, Yungkwang, and the lowest milling rate was obtained from Suke ＃ 169, the small grain variety. But the small grained hard wheat variety such as Caprock and NB 68513 showed higher milling rate compared with the soft wheat variety, Suke ＃ 169. 9) There were no great differences of ash content due to location, fertilizer level and seeding date while remarkable differences due to variety were found. The ash content was high in the hard wheat varieties such as NB 68513, Caprock and low in soft wheat varieties such as Yungkwang and Suke ＃ 169. 3. Protein content: 10) The protein content was increased under the condition of high temperature, low humidity and shading, which were responsible for reduction of 1, 000 grain weight. The varietal differences of protein content due to high temperature, low humidity and shading conditions were greater in Yungkwang than in NB 68513. 11) The high content of protein in grain within one to two weeks after flowering might be due to the high ratio of pericarp and embryo to endosperm. As grains ripen, the effects of embryo and pericarp on protein content were decreased, reducing protein content. However, the protein content was getting increased from three or four weeks after flowering, and maximized at seven weeks after flowering. The protein content of grain at three to four weeks after flowering increased as the increase of 1, 000 grain weight. But the protein content of matured grain appeared to be affected by daily temperature on calender rather than by duration of ripening period. 12) Highly significant positive correlation value was found between the grain protein content and flour protein content. 13) The protein content was increased under the high level of fertilizers and late seeding. The local differences of protein content were greater in Suwon than in Kwangju and Iri. 14) Protein content in the varieties tested were high in Yungkwang, NB 68513 and Caprock, and low in Suke ＃ 169. However, variation in protein content due to the cultural methods was low in Suke ＃ 169. 15) Protein yield per unit area was increased in accordance with increase of fertilizer levels and early maturing culture. However, nitrogen fertilizer was utilized rather effectively in early maturing culture and Yungkwang was the highest in protein yield per unit area. 4. Physio-chemical properties of wheat flour: 16) Sedimentation value was higher under the conditions of high temperature, low humidity and high levels of fertilizers than under the conditions of low temperature, high moisture and low levels of fertilizers. Such differences of sedimentation values were more apparent in NB 68513 and Caprock than Yungkwang and Suke ＃ 169. The local difference of sedimentation value was greater in Suwon than in Kwangju and Iri. Even though the sedimentation value was highly correlated with protein content of grain, the high humidity was considered one of the factors affecting sedimentation value. 17) Changes of Pelshenke values due to the differences of cultural practices and locations were generally coincident with sedimentation values. 18) The mixing time required for mixogram was four to six minutes in NB 68513, five to seven minutes in Cap rock. The great variation of mixing time for Yungkwang and Suke ＃ 169 due to location and planting conditions was found. The mixing height and area were high in hard wheat than in soft wheat. Variation of protein content due to cultural methods were inconsistent. However, the pattern of mixogram were very much same regardless the treatments applied. With this regard, it could be concluded that the mixogram is a kind of method expressing the specific character of the variety. 19) Even though the milling property of NB 68513 and Caprock was deteriorated under either high temperature and low humidity of high fertilizer levels and late seeding conditions, baking quality was better due to improved physio-chemical properties of flour. In contrast, early maturing culture deteriorated physio-chemical properties, milling property of grain and grain protein yield per unit area was increased. However, it might be concluded that the hard wheat production of NB 68513 and Caprock for baking purpose could be done better in Suwon than in Iri or Kwangju area. 5. Interrelationships between the physio-chemical characters of wheat flour: 20) Physio-chemical properties of flour didn't have direct relationship with milling rate and ash content. Low grain weight produced high protein content and better physio-chemical flour properties. 21) In hard wheat varieties like NB 68513 and Caprock, protein content was significantly correlated with sedimentation value, Pelshenke value and mixing height. However, gluten strength and baking quality were improved by the increased protein content. In Yungkwang and Suk ＃ 169, protein content was correlated with sedimentation value, but no correlations were found with Pelshenke value and mixing height. Consequently, increase of protein content didn't improve the gluten strength in soft wheat. 22) The highly significant relationships between protein content and gluten strength and sedimentation . value, and between Pelshenke value, mixogram and gluten strength indicated that the determination of mixogram and Pelshenke value are useful for de terming soft and hard type of varieties. Determination of sedimentation value is considered useful method for quality evaluation of wheat grain under different cultural practices.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.409-419
• /
• 2008

Statement of problem: At all times people have tried to fabricate tooth restorations using tooth colored materials. Recently, demands for esthetics, even in restorations requiring strength, has brought a revolution to dentistry and increased use of zirconia. The basic color of zirconia is white to ivory. The color can be partially adapted by veneering it with ceramic materials. However, it would be better if the substructure could already be adapted to the basic color shade of neighboring teeth. By adaptation to the basic shade, it can help to reduce the necessary layer thickness of the veneer ceramic to achieve the desired color. Purpose: The purpose of this study was to spectrophotometrically evaluate the influence of shading of zirconia core on the final shade of all-ceramic restorations using the CIE $L^{*}a^{*}b^{*}$ system. Material and methods: Core specimens (n = 20 per group) of Lava Frame Zirconia, KaVo Everest Zirconia, Digident CAD/CAM Zirconia were fabricated at 20 mm in diameter and 0.5 mm in thickness. Halves of each groups were shaded in A3 color. These core specimens were veneered with A3 porcelain of the recommended manufacturer at thickness of 0.5 mm. CIE $L^{*}a^{*}b^{*}$ coordinates were recorded for each specimen with a spectrophotometer (Model CM-2600d, Minolta, Japan) at 0.5 mm, 0.4 mm, 0.3 mm in thickness. Color differences were calculated using the equation ${\Delta}E^{*}=[({\Delta}L^{*})2+({\Delta}a^{*})2+({\Delta}b^{*})2]1/2$. Results: 1. In the case where porcelain layer has a thickness of 0.5 mm, Lava Frame Zirconia and KaVo Everest group did not show clinically perceived color difference, however Digident CAD/CAM Zirconia group showed clinically perceived color difference according to shade allowed on core. 2. When the thickness of porcelain layer decreased from 0.5 mm to 0.4 mm, Lava Frame Zirconia and KaVo Everest group did not show clinically perceived color difference, on the other hand Digident CAD/CAM Zirconia group showed clinically perceived color difference according to shade allowed on core. 3. When the thickness of porcelain layer decreased from 0.5 mm to 0.3 mm, clinically perceived color differences were observed from all three groups. Conclusions: Ziroconia system, which is possible to allow shade on core, are thought to be much more favorable to reproduce natural shade compared to systems that is impossible to give shade. Therefore, clinicians ought to choose adequate system for certain clinical situation by considering above specific character.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.2
• /
• pp.79-87
• /
• 1978

This is an experimental study on friction welding and heat treatment of engine exhaust valve materials whose welding combination is SCr4 as stem to 21-4N as head and SUH3 to 21-4N. In this study, not only the experiments of friction welding under the selected optimum welding condition and the examination of the mechanical properties were carried out, but also the heat treatment of friction welded specimens under the two selected conditions was taken to obtain the better welding character, eliminating the latent stress and the hardness peak which appeared at the welded zones of heat resisting steel(21-4N, SUH3) and low alloyed steel ($SCr_4$) friction weldments. The results obtained by the experiments and consideration in this study are as follows: I) It was experimentally proved quite reasonable that 'speed=3,OOO rpm, heating pressure Pl=8 kg/ mm2, upsetting pressure p, = 20 kg/mm', heating time $t_1$ = 3 see, upsetting time TEX>$t_2$ = 2.5 sec' was selected as the optimum welding condition for friction-welding the engine exhaust valve materials $SCr_4$ to 21-4 Nand SUH 3 to 21-4 N. 2) The results of the previous study and this one on friction welding of such dissimilar materials as SUH 3-SUH 31, SCr 4-SUH 31, SCr 4-SUH 3, SUH 3-CRK 22, SCr4-21-4 Nand SUH3-21-4 N agreed with each other substantially in the friction welding characteristics at welded interface zones. 3) It was also certified quite satisfactory that '600\ulcornerCX30 min. Xroom air cooling' as an optimum heat treatment condition of the friction welded materials SCr 4-21-4 Nand SUH 3-21-4 N was experimentally determined to eliminate the latent stress and the hardness peak at welded zones. 4) About 20% of the tensile strength before heat treatment of friction welded specimens was decreased after heat treatment 600\ulcornerCX30 min. Xair cooling, but the location of fracture was moved from heat affected zone to parent $SCr_4$ & SUH3. 5) Microscopic examination of the weld joints friction-welded and heat-treated under the above mentioned conditions revealed that the weld zone is very narrow and has a fine grained intermixed structure without any welding defects. 6) The above mentioned conditions can be also utilized as friction welding parameters of the other dissimiar materials for engine valve production.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.23-34
• /
• 2012

This Study is about the "Comprehensive Landscape Improvement Plan for Gu-ryoung Seaside Village that was one of most exhibited projects for developing sea villages." The formulations of the plan were supervised by the Ministry of Land, Transport, and Maritime Affairs and were executed by the Goheung Country. Rather than proposing renovations for the landscape, this study maintains the existing order and attempts to examine the plan by scrutinizing the vernacular design language of the landscape. In the study, community members had the opportunity to express their opinions and ideas about the community through workshops composed of community participation programs, and participated in the decision-making process through consultation meetings. The conclusion of this study was relevant to the activities of the committee on landscape improvement. The Comprehensive Landscape Improvement Plan has three objectives: (1) resorting and modifying the natural landscape, (2) restructuring the roadways, and (3) modifying key spaces. In the end, the role of Gu-ryong Mountain as a background of the landscape was focused on tree planting drives that were undertaken, and accessibility to the sea front was improved. Second, in restructuring the roadways, rough roads were restored and unconnected roads were connected to ensure a network of roads along the sea front, inner roads in the village, roads at the Fringes Mountains, and stone roads on the mud flat. In addition, roads were named according to the character of the landscape and signs were installed. Finally, the existing key spaces, in which community members came together, were restored and new key spaces were created for the outdoor activities of the inhabitants and the diverse experience of visitors. A guideline was also created to regulate private areas such as roofs, walls, fences of residential buildings, and private container boxes and fishing gear along the sea front. The strength of this study is that it is seeking to determine the greatest potential of the landscape and set the plan by examining the lives of community members. Some problems were found during the development of this study. Further, there were problems in the community's understanding as elaborated below. First is the gap between community members' awareness and practice. Even though they were aware of the problems with the village landscape, they hesitated to implement improvements. Second, community members have misunderstandings about the landscape the improvement plan. The local government and the residents have understood this plan as a development project; for example, new building construction or the extension of roads. Third, residents are not aware that continuous attention and improvements are required for the upkeep of the landscape in the sea village. The plan to improve the landscape should promote a balance between making the area as a tourist attraction and maintaining the lives and cultural activities, because the sea village system incorporates settlements, economy, and culture.

• Electrical & Electronic Materials
• /
• v.12 no.7
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.98
• /
• pp.54-77
• /
• 2020

Produced during the Goryeo period (718-1392), the statue of the monk Huirang Daesa at Haeinsa Temple in Hapcheon is almost life-size, with a height of 82.4 cm, a width of 66.6 cm at the knees, and a maximum width of 44 cm at the torso (front and back). Notably, it is the only known example of an East Asian Buddhist sculpture made from wood and dry lacquer that was formed by joining the front and back halves. However, a similar technique was used on a dry lacquer statue of the Medicine Buddha at Cheongnyangsa Temple in Bonghwa, which is estimated to date from the late Goryeo or early Joseon period. As such, this technique is thought to represent this particular time period. In an eighteenth-century travelogue about a trip to Mt. Gayasan, the author describes a sculpture that is believed to be the statue of Huirang Daesa at Haeinsa Temple, based on various unique features that closely correspond to the sculpture's current appearance. For example, the sculpture is said to have a hole in the chest and rough, knobby tendons and bones, two features that can still be seen today. Another sculpture of a Buddhist monk who was active in the western regions during the third and fourth century also has a hole in the chest, which is said to be a symbol of spiritual strength. The travelogue also states that the statue was lacquered black at the time, which means that it must have been painted with its present colors some time in the nineteenth century. Over time, the sculpture has been enshrined in various halls of Haeinsa Temple, including Haehaengdang, Jinsangjeon, and later Josajeon (Hall of the Patriarchs), and Bojangjeon. Records show that images of Buddhist monks, or "seungsang," were produced in Korea as early as the Three Kingdoms period (18 BCE-660 CE), but few of these works have survived. At present, only four such sculptures are extant, including the images of Huirang Daesa from the Goryeo period, and those of Monk Naong and Uisang Daesa from the Joseon period. Of these, the sculpture of Huirang Daesa has special significance for its early production date (i.e., CE. tenth century), outstanding production techniques, and superb artistic quality, realistically capturing both the external appearance and internal character of the subject. The tradition of producing, sanctifying, and worshipping statues of monks was prevalent not only in Korea, but also in China and Japan. However, each country developed its own preferred materials and techniques for producing these unique images. For example, while China has a large number of mummified Buddhist images (yuksinbul), Japan produced diverse images with various materials (e.g., dry lacquer, wood, clay) according to period. But despite the differences in materials and techniques, the three nations shared the same fundamental purpose of expressing and honoring the inherent spirituality of the monks.

• Sim-seong Yeon-gu
• /
• v.30 no.1
• /
• pp.31-66
• /
• 2015

A study on a Russian fairy tale entitled "Seven Stars" was conducted from the perspective of analytical psychology. The plot goes as follows. Once upon a time, a village in Russia was suffering from severe drought. Villagers were dying of thirst, and crops were withering day by day. One night, a little girl left their house carrying a wooden dipper to find water for her sick mother by herself. However, water was nowhere to be found. She felt tired and fell asleep. When she woke up, the moon was already over her head, and the dipper had been filled with water. On her way home to give the water to her mother, she found a dog lying on the ground. The dog was also dying of excessive thirst, so she gave the dog a handful of water. Then the wooden dipper suddenly turned into a silver dipper. When she had finally arrived home and her mother has drunk the water, the silver dipper changed into a golden dipper. At that moment, an old man showed up and asked for water. The little girl gave him water. When the old man stared at the water, she realized that there were seven diamonds twinkling like stars in the dipper. The water never ran out. Surprisingly enough, the seven diamonds suddenly soared up into the sky and eventually formed a constellation of the Big Dipper. The water was shared with the other villagers who, then, recovered their strength. The severe drought came to an end, and the villagers danced together with joy. In this fairy tale, the severe drought symbolizes devastation caused by a unidirectional stream of consciousness while the little girl represents a new function, which shows the value of women who can heal and restore from that devastation. Symbolized in a fairy tale character such as 'a daughter' or 'a little girl', the new function eventually reaches up to the value which leads and affects the group as well as individuals. To conclude, this new function represents the unconscious process whose role is to revitalize the maternity and resolve the problems posed to a group as well as individuals.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.1
• /
• pp.1-31
• /
• 2008

Trust is central to human relationships, at all times and places. The importance of trust is fundamental in all areas of human life, not only in the area of business administration. 2,500 years ago in China, Confucius taught that the foundation of politics was the trust of the people, more important even than military strength or the supply of food. Shakespeare's play, "Much Ado about Nothing' is about trust and deception. These days, trust and transparency in a commercial organization's business culture form the basis of the 'social capital' by which that organization increases its productivity. A successful company raises productivity by the accumulation of social capital, derived from a trust relationship between business partners, and between the company and consumers. Trust is the crucial factor. At the national level, building trust determines a nation's competitiveness. For a company, long term trust relationships with customers are essential for its survival in a business environment of rapid change. Such relationships, based on trust, are important assets to ensure a company's competitive advantage, and need to be organic to that company's business culture. Because of this importance, trust relationships have been studied in diverse areas within business administration, and especially within marketing, where they form the basis of a successful relationship between producer and consumer. However, what has been lacking is a unified definition of trust. Research has been conducted on the basis of various definitions and models. The majority of researchers have not considered the multidimensional character of the concept of trust until now. Approaches based on a one dimensional model have undermined the value of research results. Furthermore, researchers have only considered trust and trustworthiness as a single component. The majority of research has explored the consequences of perceived trust for outcomes such as loyalty or cooperation, but has neglected the effects of trustworthiness upon the mechanisms of consumer trust. This study focuses on the dimension of trust from such a perspective. It seeks to verify the effect of trust on customer intentions by breaking it down into three separate components: 1) the salesperson, 2) the product/service, and 3) the company. The purposes of this paper are as follows: Firstly, we review the multidimensional nature of trust objects: the salesperson, the product/service, and the company. Secondly, we analyze the relationship between multidimensional trust and trustworthiness. Thirdly, we analyze the connection between trust and repeat purchase intentions for the maintenance of long term relationships. For these purposes the author has developed several hypotheses as follows: H1-1: The competence of a salesperson is positively associated with the trust given by the consumer to the salesperson. H1-2: The benevolence of a salesperson is positively associated with the trust given by the consumer to the salesperson. H2-1: The competence of product/service is positively associated with the trust given by the consumer to the product/service. H2-2: The benevolence of product/service is positively associated with the trust given by the consumer to the product/service. H3-1: The reputation of a company is positively associated with the trust given by the consumer to the company. H3-2: The physical environment of a company is positively associated with the trust given by the consumer to the company. H4-1: Trust in a salesperson is positively associated with repeat purchase intentions. H4-2: Trust in a product/service is positively associated with repeat purchase intentions. H4-3: Trust in a company is positively associated with repeat purchase intentions. The data was compiled from 366 questionnaires. 500 questionnaires were collected, but some of the data was considered unsuitable and inappropriate. The subjects of the survey were male and female customers purchasing products at department stores in Seoul, Daegu and Gyeongbuk. It was carried out between Oct. 25 and 29, 2007. The data was analyzed by frequency analysis using SPSS 12.0 and structural equation modeling using LISREL 8.7. The result of the overall model analysis is as follows: Chi-Square=445.497, d.f.=185, p-value=0.0, GFI=.901, RMSEA=.0617, NNFI=.986, NFI=.981, CFI=.989, AGFI=.864, RMR=.0872. The results of the overall model analysis were coherent. It was found that trust is a multi-dimensional construct, that each of the dimensions of trust are meaningful influences on customer's repurchase intention. Trust in a company may be the most relevant, while trust in a product/service and a salesperson may be less relevant to repurchase intentions. The effective factors in determining trust in a salesperson and a company's product/service were found to be competence and benevolence. Factors in determining trust in a company were its reputation and physical environment, and the relationship of each effective trust factor has been verified in this research. As a result, it was found that competence and benevolence have a meaningful influence on trust in a salesperson and in product/service. It was also found that a company's reputation influences the overall trust in the company significantly but a company's physical environment does not have much effect.

• Journal of Haehwa Medicine
• /
• v.9 no.1
• /
• pp.513-545
• /
• 2000

I. Introduction Bi(痺) means blocking. It can reach at the joints or muscles or whole body and make pains. Numbness and movement disorders. BiJeung can be devided into SilBi and HeoBi. In SilBi there are PungHanSeupBi, YeolBi and WanBi. In HeoBi, there are GiHyeolHeoBi, EumHeoBi and YangHeoBi. The common principle for the treatment of BiJeung is devision of the chronic stage and the acute stage. In the acute stage, BiJeung is usually cured easily but in the chronic stage, it is difficult. In the terminal stage, BiJeung can reach at the internal organs. BiJeung is one kind of symptoms making muscles, bones and jonts feel pain, numbness or edema. For example it can be gout or SLE etc. Many famous doctors studied medical science by their fathers or teachers. So the history of medical science is long. So I studied ${\ll}Bijeungjujip{\gg}$. II. Final Decision 1. BanSuMun(斑秀文) thought that BiJeung can be cured by blocking of blood stream. So he insisted that the important thing to cure BiJeung is to improve the blood stream. He usually used DangGuiSaYeokTang(當歸四逆湯), DangGuiJakYakSanHapORyeongSan, DoHong-SaMulTang(桃紅四物湯), SaMyoSanHapHeuiDongTang and HwangGiGyeJiOMulTang. 2. JangGeonBu(張健夫) focused on soothing muscles and improving blood seam. So he used many herbs like WiRyeongSeon(威靈仙), GangHwal(羌活), DokHwal(獨活), WooSeul(牛膝), etc. Especially he pasted wastes of the boiled herbs. 3. OSeongNong(吳聖農) introduced four rules to treat arthritis. So he usually used SeoGak-SanGaGam(犀角散加減), BoYanHwanOTang(補陽還五湯), ODuTang(烏頭湯), HwangGiGyeJiOMulTang. 4. GongJiSin thought disk hernia as one kind of BiJeung. And he said that Pung can hurt upper limbs and Seup can hurt lower limbs. He used to use GyeJiJakYakJiMoTang(桂枝芍藥知母湯). 5. LoJiJeong(路志正) introduced four principles to treat BiJeung. He used BangPungTang(防風湯), DaeJinGuTang) for PungBi(風痺), OPaeTang(烏貝湯) for HanBi(寒痺), YukGunJaTang(六君子湯) for SeupBi(濕痺) and SaMyoTang(四妙湯), SeonBiTang(宣痺湯), BaekHoGaGyeTang(白虎加桂湯) for YeolBi(熱痺). 6. GangChunHwa(姜春華) discussed herbs. He said SaengJiHwang(生地黃) is effective for PungSeupBi and WiRyungSun(威靈仙) is effective for the joints pain. He usually used SipJeonDaeBoTang(十全大補湯), DangGuiDaeBoTang(當歸大補湯), YoukGunJaTang(六君子湯) and YukMiJiHwanTang(六味地黃湯). 7. DongGeonHwa(董建華) said that the most important thing to treat BiJeung is how to use herbs. He usually used CheonO(川烏), MaHwang(麻黃) for HanBi, SeoGak(犀角) for YeolBi, BiHae) or JamSa(蠶沙) for SeupBi, SukJiHwang(熟地黃) or Vertebrae of Pigs for improving the function of kidney and liver, deer horn or DuChung(杜沖) for improving strength of body and HwangGi(黃?) or OGaPi(五加皮) for improving the function of heart. 8. YiSuSan(李壽山) devided BiJeung into two types(PungHanSeupBi, PungYeolSeupBi). And he used GyeJiJakYakJiMoTang(桂枝芍藥知母湯) for the treatment of gout. And he liked to use HwanGiGyeJiOMulTangHapSinGiHwan 枝五物湯合腎氣丸) for the treat ment of WanBi(頑痺). 9. AnDukHyeong(顔德馨) made YongMaJeongTongDan(龍馬定痛丹)-(MaJeonJa(馬錢子) 30g, JiJaChung 3g, JiRyong(地龍) 3g, JeonGal(全蝎) 3g, JuSa(朱砂) 0.3g) 10. JangBaekYou(張伯臾) devided BiJeung into YeolBi and HanBi. And he focused on improving blood stream. 11. JinMuO(陳茂梧) introduced anti-wind and dampness prescription(HoJangGeun(虎杖根) 15g, CheonChoGeun 15g, SangGiSaeng(桑寄生) 15g, JamSa(蠶絲) 15g, JeMaJeonJa(制馬錢子) 3g). 12. YiChongBo(李總甫) explained basic prescriptions to treat BiJeung. He used SinJeongChuBiEum(新定推痺陰) for HaengBi(行痺), SinJeongHwaBiSan(新定化痺散) for TongBi(痛痺), SinJeongGaeBiTang(新定開痺湯) for ChakBi(着痺), SinJeongCheongBiEum(新定淸痺飮) for SeupYeolBi(濕熱痺), SinRyeokTang(腎瀝湯) for PoBi(胞痺), ORyeongSan for BuBi(腑痺), OBiTang(五痺湯) for JangBi(臟痺), SinChakTang(腎着湯) for SingChakByeong(腎着病). 13. HwangJeonGeuk(黃傳克) used SaMu1SaDeungHapJe(四物四藤合制) for the treatment of a acute arthritis, PalJinHpPalDeungTang(八珍合八藤湯) or BuGyeJiHwangTangHapTaDeungTang(附桂地黃湯合四藤湯) for the chronic stage and ByeolGapJeungAekTongRakEum(鱉甲增液通絡飮) for EumHeo(陰虛) 14. GaYeo(柯與參) used HwalRakJiTongTang(活絡止痛湯) for shoulder ache, SoJongJinTongHwalRakTank(消腫鎭痛活絡湯) for YeolBi(熱痺), LiGwanJeolTang(利關節湯) for ChakBi(着痺), SinBiTang(腎痺湯) for SinBi(腎痺) and SamGyoBoSinHwan(三膠補腎丸) for back ache. 15. JangGilJin(蔣길塵) liked to use hot-character herbs and insects. And he used SeoGeunLipAnTang(舒筋立安湯) as basic prescription. 16. RyuJangGeol(留章杰) used GuMiGangHwalTang(九味羌活湯) and BangPungTang(防風湯) at the acute stage, ODuTang(烏頭湯) or GyeJiJakYakJiMoTang(桂枝芍藥知母湯) for HanBi of internal organs, YangHwaHaeEungTang(陽和解凝湯) for HanBi, DokHwalGiSaengTang(獨活寄生湯), EuiYiInTang(薏苡仁湯) for SeupBi, YukGunJaTang(六君子湯) for GiHeoBi(氣虛痺) and SeongYouTang(聖兪湯) for HyeolHeoBi(血虛痺). 17. YangYuHak(楊有鶴) liked to use SoGyeongHwalHyelTang(疏經活血湯) and he would rather use DoIn(桃仁), HongHwa(紅花), DangGui(當歸), CheonGung(川芎) than insects. 18. SaHongDo(史鴻濤) made RyuPungSeupTang(類風濕湯)-((HwangGi 200g, JinGu 20g, BangGi(防己) 15g, HongHwa(紅花) 15g, DoIn(桃仁) 15g, CheongPungDeung(靑風藤) 20g, JiRyong(地龍) 15g, GyeJi(桂枝) 15g, WoSeul(牛膝) 15g, CheonSanGap(穿山甲) 15g, BaekJi(白芷) 15g, BaekSeonPi(白鮮皮) 15g, GamCho(甘草) 15g).