• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.603-610
• /
• 2005

Beam-forming method based on the estimated channel information at the base station degrade the performance mismatching directional vector in case of systems which Frequency Division Duplex (FDD) center frequency of uplink and downlink are different. Also blind estimation technique which is to obtain directional vector of reverse link through received signal has disadvantage of hardware complexity increase. To solve these problems, in present paper, a smart antenna algorithm which is to improve the beam-forming complexity increase due to user number by appling the spatial fourier transform to be able to beam- forming toward a wanted direction through adjusting a obtained uplink weight function by estimating Angle-of-Arrival (AoA) to the competable form at the downlink is proposed. The proposed algorithm is integrated to the CDMA downlink transmitter and simulations are performed to confirm the performance as frame error rate at the receiver. As a result, the beam forming effect is confirmed and the performance gain with the proposed algorithm is comparable to ordinary smart antenna system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9B
• /
• pp.602-609
• /
• 2005

In this paper, the performance of HCS (hierarchical cell structure), which consists of macro-cell and micro-cell, has been analyzed by assuming that the cells in HAPS (high altitude plat(on station) are tessellated to provide wide coverage, control the co-channel interference and give the higher spectrum efficiency. Since the outside-cell interference factor is well blown to analyze the effects of interference between cells, the effects of interference from the micro-cells into the macro-cells has been estimated using the factor as a performance estimation of HCS in HAPS. HCS served by HAPS can be realized by permitting the suitable power control and the proper number of users in micro-cell because the interference from the micro-cell into the macro-cell is not a function of the distance between cells but a function of the power control and the number of users.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1146-1153
• /
• 2007

In this paper, we analyze the I/Q imbalances effects at the WiBro uplimk when using direct-conversion RF transceiver. If I/Q imbalance exists, the transmit signal is spread over two sbcarriers. As a result, phenomenon of performance reducing is produced. Contrary to OFDM system in which one user uses all subcarrier, symmetrical two subcarriers are assigned other users in OFDMA system. I/Q imbalances elements can't be estimated such a conventional allocation method of tiles in subchannel and compensated. In order to solve the problem, We propose a new method in order that symmetrical two subcarriers are assigned one user. If novel method is applied, we can estimate I/Q imbalances and compensate distortion received signal. As a result, we can obtain a performance similar performance when I/Q imbalances is not existed. Also, if proper detection methods are used, we get the effect of performance improvement, because of diversity gain what is happened due to combining I/Q imbalances with multi path fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.8
• /
• pp.643-650
• /
• 2014

Recently, the wireless communication applications are studied in various environment by the development of short range communication system like wireless sensor networks. This paper presents the analysis of localization schemes for ship application using received signal strength. The localization schemes using received signal strength from wireless networks are classified under two methods, which are Range based method and Range free method. Range based methods estimate the location with least square estimation based on estimated distance using path-loss model. Range free methods estimated the location with the information of anchor nodes linked to target. Simulation results show the appropriate localization scheme for each cabin environments based on the empirical path-loss model in warship's internal space.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.8
• /
• pp.651-659
• /
• 2014

In this paper, we consider a two way relay network for ship-to-ship communications in a fleet, where two communicating ships exchange the information with the help of a multi-antenna relay ship. For the network, we propose a rate-aware three-phase analog network coding to improve the reliability of the information exchange with asymmetric rates. The proposed scheme allows low-complex implementation of the relay without channel estimation by generating an improved analog network coded signal with the orthogonally received signals from two ships by using only the received signal power at each antenna. In addition, the proposed scheme reduces outages in the data exchange at asymmetric rates by adopting a rate-aware relay power allocation, which is confirmed by evaluating the outage performance via simulation.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.7
• /
• pp.335-343
• /
• 2006

We have designed the system that measure one channel ECG by two electrode and extract real-time EDR with more related resipiration and comportable to subject by using conductive textile. On the assumption that relation between RL electrode and potential measurement electrode is coupled with RC connected model, we designed RL drive output to feedback two electrode for reduction of common mode signal. The conductive textile which was used for two ECG electrode was offered more comfort during night sleep in bed than any other method using attachments. In the method of single-lead EDR, R wave point or QRS interval area could be used for EDR estimation in traditional method, it is, so to speak, the amplitude modulation(AM) method for EDR. Alternatively, R-R interval could be used for frequency modulation(FM) method based on Respiratory Sinus Arrhythmia(RSA). For evaluation of performance on AM EDR and FM EDR from 14 subject, ECG lead III was measured. Each EDR was compared with both temperature around nose(direct measurement of respiration) and respiration signal from thoracic belt(indirect measurement of respiration) on mean squared error(MSE), cross correlation(Xcorr), and Coherence. The upsampling interpolation technique of multirate signal processing is applied to interpolating data instead of cubic spline interpolation. As a result, we showed the real-time EDR extraction processing to be implemented at micro-controller.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.1-7
• /
• 2009

In this paper, the author presents the MIMO(Multi-Input Multi-Output) receiver algorithm with the capability of inter-cell or inter-sector interference cancellation over multi-antenna OFDM(Orthogonal Frequency Division Multiplexing) systems. As contrast with the previous research dealing with the filtering scheme at the time domain, the proposed algorithm is presented as the pre-filtering scheme which can be applicable to the frequency domain. Note that the proposed one can be implemented only by pilot symbols which are used in the channel estimation. In addition, it is analytically confirmed that the proposed scheme can be applied for either MIMO( C-SM(Collaborative-Spatial Multiplexing)) interference or SIMO(Single-Input Multi-Out) interference. The proposed receiver algorithm is verified by simulations over UL-PUSC SR off in IEEE 802.16e standard. From simulation results, it is confirmed that the proposed one can be applicable regardless of the kind of interference. Furthermore, it is verified that the performance is guaranteed even under Ole severe effect of interference and the improvement of system throughput is guaranteed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.451-460
• /
• 2004

The pilot bit pattern of W-CDMA system is used for the channel estimation and frame synchronization confirmation. This paper proposes the binary sequences for the frame synchronization for wideband code division multiple access (W-CDMA) system. We present the circuit for the generation of ideal frame synchronization property using the binary sequences called frame synchronization word(FSW). W-CDMA system uses compressed mode where up to 7 slots per one 10 msec frame are not transmitted to make measurements from another frequency without a full dual receiver terminal. It is shown that the proposed frame synchronization words also maintain the optimal frame synchronization property in the compressed mode by using the complementary mapping relationship of preferred pair. And we discuss the realization circuit for the generation of frame synchronization words by using the concept of preferred pairs, complementary mapping relationship, and maximal length sequence.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.133-143
• /
• 2011

In this paper, a complexity-balancing algorithm is proposed for distributed video coding based on entropy coding. In order to reduce complexity of DVC-based decoders, the proposed method employs an entropy coder instead of channel coders and the complexity-balancing method is designed to improve RD performance with minimal computational complexity. The proposed method performs motion estimation in the decoder side and transmits the estimated motion vectors to the encoder. The proposed encoder can perform more accurate refinement using the transmitted motion vectors from the decoder. During the motion refinement, the optimal predicted motion vectors are decided by the received motion vector and the predicted motion vectors and complexity load of block is allocated by adjusting the search range based on the difference between the received motion vector and the predicted motion vectors. The computational complexity of the proposed encoder is decreased 11.9% compared to the H.264/AVC encoder and that of the proposed decoder are reduced 99% compared to the conventional DVC decoder.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.738-749
• /
• 2011

In this paper, we study QoS(Quality of Service) control protocols and the effect using MAC/PHY parameters of client device in mobile network. We proposes the way of controling the bit-rate by estimating the channel condition of the client with measured MAC/PHY parameters which is sent from the client. With the proposed method, more accurate available bit-rate can be estimated compared to conventional protocol, RTCP(Real-time Transport Control Protocol). The accurate bit-rate estimation can decrease wasted bit-rate and transport delay. In the result of the advantages, the transported video quality can be enhanced. In this paper, we show the effects of enhancement using client's the field data measured in WiMAX.