• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.8 s.338
• /
• pp.17-24
• /
• 2005

This paper proposes a Decision Feedback Equalizer (DFT) with an error feedback filter for blind channel equalization. The proposed equalizer uses Least Mean Square(LMS) Algorithm and Multi-Modulus Algorithm (MMA), and has been designed for 64/256 QAM constellations. The existing MMA equalizer uses either two transversal filters or feedforward and feedback filers, while the proposed equalizer uses feedforward, feedback and error feedback filters to improve the channel adaptive performance and to reduce the number of taps. The proposed equalizer has been simulated using the $SPW^{TM}$ tool and it shows performance improvement. It has been modeled by VHDL and logic synthesis has been performed using the $0.25\;\mu m$ Faraday CMOS standard cell library. The total number of gates is about 190,000 gates. The proposed equalizer operates at 15 MHz. In addition, FPGA vertification has been performed using FPGA emulation board.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.4
• /
• pp.173-179
• /
• 2002

This paper describes an equalizer using the DFE (Decision Feedback Equalizer) structure, CMA (Constant Modulus Algorithm) and LMS (Least Mean Square) algorithms. The DFE structure has better channel adaptive performance and lower BER than the transversal structure. The proposed equalizer can be used for 16/64 QAM modems. We employ high speed multipliers, square logics and many CSAs (Carry Save Adder) for high speed operations. We have developed floating-point models and fixed-point models using the COSSAP$\^$TM/ CAD tool and developed VHDL filter. The proposed equalizer shows low BER in multipath fading channel. We have performed models. From the simulation results, we employ a 12 tap feedback filter and a 8 tap feedforward logic synthesis using the SYNOPSYS$\^$TM/ CAD tool and the SAMSUNG 0.5$\mu\textrm{m}$ standard cell library (STD80) and verified function and timing simulations. The total number of gates is about 130,000.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.153-160
• /
• 2004

In this paper, we propose an efficient bit loading algorithm for IEEE 802.11a wireless LAN systems. While a conventional bit loading algorithm uses the SNR value of each subcarrier, it is very difficult to estimate the exact SNR value in wireless LAN systems due to randomness of AWGN. Therefore, in order to solve this problem our proposed algorithm uses the channel frequency response instead of the SNR of each subcarrier. Through simulation results, we can obtain the performance gain of 3.5∼8㏈ at PER of 10-2 with the proposed bit loading algorithm while the conventional one obtains the performance gain of 0.5∼5㏈ at the same conditions. Also, the increased data rate can be confirmed 63Mbps. After the logic synthesis using 0.3${\mu}{\textrm}{m}$ CMOS technology, the logic gate count for the processor with proposed algorithm can be reduced by 34% in comparison with the conventional one.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.25-28
• /
• 2010

The need for multiband RF front-end in modern communication system is growing rapidly. For example, satellite system always uses a complex arrangement of frequency plans and consequently needs filters for each communication channel and it will be ideal to have a single filter module that does jobs of all those channel filters to reduce the size and payload of the system. In this paper, a new method to transform four-port self-feedback balanced dual-band bandpass filter into two-port is proposed. The two-port balanced dual-band bandpass filter which has baluns at the input and output ports and the fundamental frequency at 2.5 GHz and the first harmonic frequency at 5.7 GHz is fabricated and measured. Good agreement between measured and simulated results was achieved.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.64.1-64.1
• /
• 2010

The morphology of mesoporous $TiO_2$ films plays an important role in the operation of a DSSC. For example, the energy conversion efficiency of DSSCs with well-organized mesoporous $TiO_2$ films is much higher than those with traditional films possessing a random morphology. In previous research, well-organized mesoporous $TiO_2$ films have mainly been synthesized using an amphiphilic block copolymer, e.g., a poly(ethylene oxide) (PEO)-based template. A graft copolymer is more attractive than a block copolymer due to its low cost and the ease with which it can be synthesized. In this work, we provide the first report on the successful synthesis of well-organized mesoporous $TiO_2$ films templated by an organized graft copolymer as a structure directing agent. Well-organized mesoporous $TiO_2$ films with excellent channel connectivities were developed via the sol gel processusing an organized PVC-g-POEM graft copolymer synthesized by one-pot ATRP. The careful adjustment of copolymer composition and solvent affinity using a THF/$H_2O$/HCl mixture was used to systematically vary the material structure. The influence of the material structure on solar cell performance was then investigated. A solid-state DSSC employing both the graft copolymer templated organized 700 nm-thick $TiO_2$ films and graft copolymer electrolytes exhibited a solar conversion efficiency of 2.2% at 100 $mW/cm^2$. This value was approximately two-fold higher than that attained from a DSSC employing a random mesoporous $TiO_2$ film. The solar cell performance was maximized at 4.6% when the film thickness was increased to $2.5{\mu}m$. We believe that this graft copolymer-directed approach introduces a new and simple route toward the synthesis of well-organized metal oxide films as an alternative to a conventional block copolymer-based template.

• The Journal of the Convergence on Culture Technology
• /
• v.3 no.4
• /
• pp.123-129
• /
• 2017

The purpose of this study is to utilize emotional movement and developmental process in literary therapy. So, I tried to reveal the process of the emotional channel that works in the human body when we deal with literary works. As a result, the emotions confirmed that the emotional codes in the human body were pulled from each other and gathered to the positions of amino acids when the shears were spoken. However, it was judged emotionally to act as a catalyst for the synthesis of amino acids. Of course, this is a humanistic and convergent argument, not a medical proof. However, if these studies continue, it will contribute to making people think more healthily.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.138-144
• /
• 2013

In XRF systems, various techniques have been developed for the synthesis of pulse shapes using digital methods instead of traditional analog methods. Trapezoidal pulse shaping algorithms can be used for digital multi-channel pulse height analysis in X-ray spectrometer systems. In this paper, an efficient trapezoidal filter architecture is presented. In addition, we present a hardware-efficient peak value detection algorithm. By the proposed algorithm, peak value detection error is decreased by half compared with the conventional algorithm. The proposed Digital Pulse Processing(DPP) algorithm is designed using Verilog HDL and implemented using an FPGA on a test board. It is demonstrated that the implemented DPP board works successfully in practical XRF systems.

• Clinical and Experimental Reproductive Medicine
• /
• v.21 no.1
• /
• pp.111-119
• /
• 1994

"Spontaneous" hardening of the zona pellucida of mouse oocytes during in vitro culture is most likely due to cortical granules exocytosis. Thus the purpose of the present study was to determine whether the exocytosis factor is involved in spontaneous zona pellucida hardening during in vitro culture of the mouse. The results obtained form these experiments were summarized as follows; 1. When a protein synthesis inhibitor(100${\mu}g$/ml puromycin) was added to the culture medium, it did not prevent spontaneous ZPH of mouse oocyte during in vitro culture. 2. Calmodulin antagonists (trifluoperazine and chlorpromazine) and calcium channel blocker (verapamil) had no inhibitory effect in spontaneous ZPH. 3. A microtubule assembly inhibitor, colcemid had some inhibitory effect on spontaneous ZPH. 4. Treatment with a microfillament formation blocker(cytochalasin-B) at 1${\mu}g$/ml concentration, resulted in the excellent inhibitory effect on spontaneous ZPH. However cytochalasin-B did not inhibit ethanol-induced ZPH.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.10
• /
• pp.11-20
• /
• 2002

This paper proposes a hardware/software codesign of the MLSE equalizer for GSM.GPRS systems. We analyze algorithms of the MLSE equalizer which consists of a channel estimator using the correlation method and the Viterbi processor. We estimate the computational complexity requirement based on the simulation of TI TMS320C5x DSP. We also estimate the gate count from the results of logic synthesis using the samsung 0.5㎛ standard cell library (STD80). Based on the results of the complexity estimation and gate count, we propose the efficient software/hardware codesign of the MLSE equalizer based on the results of the complexity estimation and gate count.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.192-203
• /
• 2001

The design of gate and runner(delivery system) is one of the most important subject in injection molding. Delivery system is a channel to flow the polymer melt from the injection molding machine to the mold cavities. Also, delivery system affect quality and productivity of the part. The synthesis of delivery system of injection molding has been done empirically, since it requires profound knowledge about the moldability and causal effects on the properties of the part, which are not available to designers through the current CAD systems. GATEWAY is a knowledge module which contains knowledge to permit non-experts as well as mold design experts to generate the acceptable geometries of gate and runner far injection molded parts. A knowledge-based CAD system is constructed by adding the knowledge module, GATEWAY, to an existing geometric modeler. A knowledge-based CAD system is a new tool which enables the concurrent design and CIM with integrated and balanced design decisions at the initial design of injection molding.