• E2M - 전기 전자와 첨단 소재
• /
• 제11권11호
• /
• pp.22-27
• /
• 1998

We have investigated the effect of an ion shower doping of the laser annealed poly-Si films at an elevated substrate temperatures. The substrate temperature was varied from room temperature to 300$^{\circ}C$ when the poly-Si film was doped with phosphorus by a non-mass-separated ion shower. Optical, structural, and electrical characterizations have been performed in order to study the effect of the ion showering doping. The sheet resistance of the doped poly-Si films was decreased from7${\times}$106 $\Omega$/$\square$ to 700 $\Omega$/$\square$ when the substrate temperature was increased from room temperature to 300$^{\circ}C$. This low sheet resistance is due to the fact that the doped film doesn't become amorphous but remains in the polycrystalline phase. The mildly elevated substrate temperature appears to reduce ion damages incurred in poly-Si films during ion-shower doping. Using the ion-shower doping at 250$^{\circ}C$, the field effect mobility of 120 $\textrm{cm}^2$/(v$.$s) has been obtained for the n-channel poly-Si TFTs.

• 한국정보통신학회논문지
• /
• 제20권5호
• /
• pp.992-997
• /
• 2016

본 논문에서는 단채널 비대칭 이중게이트 MOSFET의 상하단 산화막 두께비에 대한 터널링 전류의 변화에 대하여 분석하고자 한다. 채널길이가 5 nm까지 감소하면 차단전류에서 터널링 전류의 비율이 크게 증가하게 된다. 이와 같은 단채널효과는 상하단 게이트 산화막 구조를 달리 제작할 수 있는 비대칭 이중게이트 MOSFET에서도 발생하고 있다. 본 논문에서는 상하단 게이트 산화막 두께비 변화에 대하여 차단전류 중에 터널링 전류의 비율 변화를 채널길이, 채널두께, 도핑농도 및 상하단 게이트 전압을 파라미터로 계산함으로써 단채널에서 발생하는 터널링 전류의 영향을 관찰하고자 한다. 이를 위하여 포아송방정식으로부터 해석학적 전위분포를 구하였으며 WKB(Wentzel-Kramers-Brillouin)근사를 이용하여 터널링 전류를 구하였다. 결과적으로 단채널 비대칭 이중게이트 MOSFET에서는 상하단 산화막 두께비에 의하여 터널링 전류가 크게 변화하는 것을 알 수 있었다. 특히 채널길이, 채널두께, 도핑농도 및 상하단 게이트 전압 등의 파라미터에 따라 매우 큰 변화를 보이고 있었다.

• 한국전기전자재료학회논문지
• /
• 제17권12호
• /
• pp.1301-1307
• /
• 2004

Reduced pressure chemical vapor deposition(RPCYD) technology has been investigated for the growth of SiGe epitaxial films with two dimensional in-situ doped boron impurities. The two dimensional $\delta$-doped impurities can supply high mobility carriers into the channel of SiGe heterostructure MOSFETs(HMOS). Process parameters including substrate temperature, flow rate of dopant gas, and structure of epitaxial layers presented significant influence on the shape of two dimensional dopant distribution. Weak bonds of germanium hydrides could promote high incorporation efficiency of boron atoms on film surface. Meanwhile the negligible diffusion coefficient in SiGe prohibits the dispersion of boron atoms: that is, very sharp, well defined two-dimensional doping could be obtained within a few atomic layers. Peak concentration and full-width-at-half-maximum of boron profiles in SiGe could be achieved in the range of 10$^{18}$ -10$^{20}$ cm$^{-3}$ and below 5 nm, respectively. These experimental results suggest that the present method is particularly suitable for HMOS devices requiring a high-precision channel for superior performance in terms of operation speed and noise levels to the present conventional CMOS technology.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권2호
• /
• pp.110-119
• /
• 2007

A new two-dimensional analytical model for dual-material double-gate fully-depleted SOI MOSFET with Pearson-IV type Doping Distribution is presented. An investigation of electrical MOSFET parameters i.e. drain current, transconductance, channel resistance and device capacitance in DM DG FD SOI MOSFET is carried out with Pearson-IV type doping distribution as it is essential to establish proper profiles to get the optimum performance of the device. These parameters are categorically derived keeping view of potential at the center (${\phi}_c$) of the double gate SOI MOSFET as it is more sensitive than the potential at the surface (${\phi}_s$). The proposed structure is such that the work function of the gate material (both sides) near the source is higher than the one near the drain. This work demonstrates the benefits of high performance proposed structure over their single material gate counterparts. The results predicted by the model are compared with those obtained by 2D device simulator ATLAS to verify the accuracy of the proposed model.

• 한국정보통신학회논문지
• /
• 제12권10호
• /
• pp.1840-1844
• /
• 2008

본 연구에서는 이중게이트 MOSFET 제작시 가장 중요한 요소인 채널도핑농도가 문턱전압이하 영역에서 전송 특성에 미치는 영향을 분석하고자 한다. 포아슨방정식을 이용한 분석학적 전송모델을 사용하였다. 문턱전압이하의 전류전도에 영향을 미치는 열방사전류와 터널링전류에 대하여 분석하였으며 본 연구의 모델이 타당하다는 것을 입증하기 위하여 서브문턱스윙 값과 채널도핑 농도의 관계를 Medici 이차원 시뮬레이션값과 비교하였다. 결과적으로 본 연구에서 제시한 전송특성 모델이 이차원 시뮬레이션모델과 매우 잘 일치하였으며 이중게이트MOSFET의 구조적 파라미터에 따라 전송특성을 분석하였다.

• 한국정보통신학회논문지
• /
• 제19권4호
• /
• pp.903-908
• /
• 2015

본 연구에서는 비대칭 이중게이트(double gate; DG) MOSFET의 채널 내 도핑분포함수의 변화에 따른 문턱전압이동 현상에 대하여 분석하였다. 반도체소자를 도핑시킬 때는 주로 이온주입법을 사용하며 이때 분포함수는 가우스분포를 나타내고 있다. 가우스분포함수는 이온주입범위 및 분포편차에 따라 형태를 달리하며 이에 따라 전송특성도 변화하게 된다. 그러므로 비대칭 DGMOSFET의 채널 내 도핑분포함수의 변화는 문턱전압에 영향을 미칠 것이다. 문턱전압은 트랜지스터가 동작하는 최소한의 게이트전압이므로 단위폭 당 드레인 전류가 $0.1{\mu}A$ 흐를 때 상단 게이트전압으로 정의하였다. 문턱전압을 구하기 위하여 해석학적 전위분포를 포아송방정식으로부터 급수형태로 유도하였다. 결과적으로 도핑농도가 증가하면 도핑분포함수에 따라 문턱전압은 크게 변하였으며 특히, 고 도핑 영역에서 하단 게이트전압에 따라 이온주입범위 및 분포편차에 의한 문턱전압의 변화가 크게 나타나는 것을 알 수 있었다.

• 대한전자공학회논문지
• /
• 제24권3호
• /
• pp.472-477
• /
• 1987

In order to prevent the short-channel effects due to threshold voltage adjustment implantation in conventional n+ doped silicon gate process, a new approach involving automatic doping of polycide by boron during source and drain implantation is introduced. P-MOSFET devece fabricated by theis approach shows improved short channel characteristics than conventional device with n+ doped gate. Some concerns of adopting this approach in CMOS technology are addressed togetheer with some suggestions.

• Transactions on Electrical and Electronic Materials
• /
• 제16권2호
• /
• pp.78-81
• /
• 2015

Pure ZnO and ZnO nanowires doped with 3 wt.% Ga (‘3GZO’) were grown by pulsed laser deposition in a furnace system. The doping of Ga in ZnO nanowires was analyzed by observing the optical and chemical properties of the doped nanowires. The diameter and length of nanowires were under 200 nm and several ${\mu}m$, respectively. Changes of significant resistance were observed and the sensitivities of ZnO and 3GZO nanowires were compared. The sensitivities of ZnO and 3GZO nanowire sensors measured at 300℃ for 1 ppm of ethanol gas were 97% and 48%, respectively.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제10권1호
• /
• pp.65-71
• /
• 2010

NAND-type SONOS with a separated double-gate FinFET structure (SDF-Fin SONOS) flash memory devices are proposed to reduce the unit cell size of the memory device and increase the memory density in comparison with conventional non volatile memory devices. The proposed memory device consists of a pair of control gates separated along the direction of the Fin width. There are two unique alternative technologies in this study. One is a channel doping method and the other is an oxide thickness variation method, which are used to operate the SDF-Fin SONOS memory device as two-bit. The fabrication processes and the device characteristics are simulated by using technology comuter-adided(TCAD). The simulation results indicate that the charge trap probability depends on the different channel doping concentration and the tunneling oxide thickness. The proposed SDG-Fin SONOS memory devices hold promise for potential application.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.252-253
• /
• 2011

ZnO-based thin film transistors (TFTs) are of great interest for application in next generation flat panel displays. Most research has been based on amorphous indium-gallium-zinc-oxide (IGZO) TFTs, rather than single binary oxides, such as ZnO, due to the reproducibility, uniformity, and surface smoothness of the IGZO active channel layer. However, recently, intrinsic ZnO-TFTs have been investigated, and TFT- arrayss have been demonstrated as prototypes of flat-panel displays and electronic circuits. However, ZnO thin films have some significant problems for application as an active channel layer of TFTs; it was easy to change the electrical properties of the i-ZnO thin films under external conditions. The variable electrical properties lead to unstable TFTs device characteristics under bias stress and/or temperature. In order to obtain higher performance and more stable ZnO-based TFTs, HZO thin film was used as an active channel layer. It was expected that HZO-TFTs would have more stable electrical characteristics under gate bias stress conditions because the binding energy of Hf-O is greater than that of Zn-O. For deposition of HZO thin films, Hf would be substituted with Zn, and then Hf could be suppressed to generate oxygen vacancies. In this study, the fabrication of the oxide-based TFTs with HZO active channel layer was reported with excellent stability. Application of HZO thin films as an active channel layer improved the TFT device performance and bias stability, as compared to i-ZnO TFTs. The excellent negative bias temperature stress (NBTS) stability of the device was analyzed using the HZO and i-ZnO TFTs transfer curves acquired at a high temperature (473 K).