• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.4
• /
• pp.419-428
• /
• 1986

While three most important aspects of line codes are the de-free, the minimum-bandwidth, and the self-clocking properties, the only TIBr, VMDBr, RMD3r, RMD4r codes possess all of these properties. This paper is to report the results of an experimental performance study of VMDB5. The encoder and decoder of VMDB5 and the pulse shaper have been inplemented. Power spectra, eye patterns, and error probabilities are experimentally measured, confirming the theoreticla performance predictions. It has been observed that the NRZ pulse shaping reliable transmission is possible with no extra equalization even in teh case when the -3dB channel bandwith is only half the Nyquist bandwidth.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.721-723
• /
• 2020

부분 공간 군집화는 고차원 데이터에서 의미 있는 특징들을 선별 및 추출하여 저차원의 부분 공간에서 군집화 하는 것이다. 그러나 최근 딥러닝 활용한 부분 공간 군집화 연구들은 AutoEncoder을 기반으로 의미있는 특징을 선별하는 것이 아닌 특징 맵의 크기를 증가시켜서 네트워크의 표현 능력에 중점을 둔 연구되고 있다. 본 논문에서는 AutoEncdoer 네트워크에 Channel Attention 모델을 활용하여 Encoder와 Decoder에서 부분 공간 군집화를 위한 특징을 강조하는 네트워크를 제안한다. 본 논문에서 제안하는 네트워크는 고차원의 이미지에서 부분 공간 군집화를 위해 강조된 특징 맵을 추출하고 이를 이용해서 보다 향상된 성능을 보여주었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.5
• /
• pp.209-217
• /
• 1985

Using the Reed-Muller Codes, the encoder and decoder system has been designed and tested in this paper. The error correcting capability of this code is [J/2} or less and the error correcting procedure can be implemented easily by using simple logic circuitry. The encoding and decoding circuits are obtained by the cyclic property and for the O15, 11) Reed-Muller code majority-logic decoding is taken. The performance is measured in error probability and weight destribution. The encoder and decoder system has been designed, implemented and interfaced with the microcomputer by using the 8255 chip. Experimental results show that the system has single error-correcting capability and total execution time for a data is about 70usec. When the probability of channel error is $10^{-6}$~$10^{-4}$ the system using the (15, 11) Reed-Muller code works very good.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.705-711
• /
• 2004

We propose novel OCDMA system with the structure of reconfigurable may encoder/decoder(RAE/ RAD), which are able to reallocate the 2-D optical codes to each subscriber and recover the transmitted data at all the receiving nodes. We have first implemented the double hard limiters composed of limiting amplifier(first hard limiter) that maintain a level of the encoded data from receiving node and AND detector(second hard limiter) for detecting the position of the encoded data and recovering the data. With the proposed system, it was successfully implemented to recover a specific channel data out of 16 code-multiplxed channels using FPGA and 4 DFB-LDs having distinct wavelengths. From experimental results, the code length resulted from increasing the number of the simultaneously connected channels has been reduced by using 2-D OCDMA multiplexed in time and wavelength instead of 1-D OCDMA. In addition, bit errors phenomenon on account of deterioration of autocorrelation peak-to-side lobe ratio is enhanced by using the double hard limiters composed of AND detector and limiting amplifiers.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.1
• /
• pp.56-63
• /
• 2008

This paper describes a 12 bit 1GS/s current mode segmented DAC for WCDMA communication. The proposed circuit in this paper employes segmented structure which consists of 4bit binary weighted structure in the LSB and 4bit thermometer decoder structure in the mSB and MSB. The proposed DAC uses delay time compensation circuits in order to suppress performance decline by delay time in segmented structure. The delay time compensation circuit comprises of phase frequency detector, charge pump, and control circuits, so that suppress delay time by binary weighted structure and thermometer decoder structure. The proposed DAC uses CMOS $0.18{\mu}m$ 1-poly 6-metal n-well process, and measured INL/DNL are below ${\pm}0.93LSB/{\pm}0.62LSB$. SFDR is approximately 60dB and SNDR is 51dB at 1MHz input frequency. Single DAC's power consumption is 46.2mW.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.840-848
• /
• 2007

A multiple description coding (MDC) scheme for 3-D Data is presented. First, a plane-based 3-D data is split into two descriptions, each of which has identical contribution in 3-D surface reconstruction. In order to maximize the visual quality of reconstructed 3-D data, then, plane parameters are modified according to channel error condition. Finally, these descriptions are compressed and transmitted over distinct channels. In decoder, if two descriptions are available, we reconstruct a high quality 3-D data. If only one description is transmitted, however, 3-D surface recovery scheme reduces artifacts on erroneous 3-D surface, yielding a smooth 3-D surface. Therefore, the proposed algorithm guarantees acceptable quality reconstruction of 3-D data even though one channel is totally lost.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1688-1695
• /
• 2016

Underwater communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes signal distortion and error floor. The excessive multipath encountered in underwater communication channel creates inter symbol interference, which is a limiting factor to achieve a high data rate and bit error rate performance. Therefore, to increase throughput efficiency and improve performance, this paper consider FTN (Faster-than-Nyquist) signalling based on turbo equalization. FTN signalling is a technique of transmitting information at a rate higher than the allowed Nyquist limit. This paper presented efficient decoder structure of FTN transmission in the environment of multipath underwater channel and we compare the performance between FTN method and conventional punctured method in lake experimentation. As a results of lake experiment, we confirmed FTN method based on turbo equalization is applicable and efficiency in underwater communication.

• Journal of Broadcast Engineering
• /
• v.4 no.1
• /
• pp.32-43
• /
• 1999

This paper addresses schemes which securely transmit voice and data information under the worst communication environment using the frequency hopping(FH) communication system to avoid monitoring or interference against enemy. In case of using the conventional FEC and bit interleaving scheme. the processing time for error control coding and bit interleaving due to system complexity is highly demanded. In this paper. the effective information coding scheme of maprity error correction and block interleaving compatible to the proposed FH communication system is proposed to transmit voice or data (I6Kbps. 4.8Kbps. 2.4Kbps. 1.2Kbps, O.6Kbps) under the worst FH communication channel. In transmitter. low rate data signals are configured to majority data blocks. and transmitted repeatedly to FH channel which are structured to 20Kbps hopping frame cells. In receiver. the received data are decoded block by block, and taken majority error correction. Consequently. burst or random errors are corrected at the block deinterleaver and the majority decoder. The proposed coder structure reduces the coding/decnding processing time as well as the jamming interferences, and further simplify the data processing complexity for FH communication. Improved performance of the proposed scheme was verified under simulated channel environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7A
• /
• pp.535-544
• /
• 2012

Multi-Input Multi-Output (MIMO) transmission is now considered as one of essential techniques enabling high rate data transmissions in wireless communication systems. In addition, severe channel impairments in wireless systems should be compensated by using highly efficient forward error correction (FEC) codes. Turbo codes or low density parity check (LDPC) codes, using iterative decoding with soft decision detection information (SDDI), are the most common examples. The excellent performance of these codes should be conditioned on accurate estimation of SDDI from the MIMO detection process. In this paper, we propose a soft MIMO detection scheme using QR decomposition of channel matrices as an efficient means to provide accurate SDDI to the iterative decoder. The proposed method employed a two sequential soft MIMO detection process in order to reduce computational complexity. Compared to the soft ZF method calculating the direct inverse of the channel matrix, the complexity of the proposed method can be further reduced as the number of antennas is increased, without any performance degradation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1834-1843
• /
• 2016

DVRs are the most common recording and displaying devices used for surveillance. Video compression plays a key role in DVRs for saving storage; the video compression standard, H.264/AVC, has recently become the dominant choice for DVRs. DVRs require various display modes, such as fast-forward, backward play, and pause; these are called trick modes. The implementation of precise trick mode play requires a very high decoding capability or a very intelligent scheme in order to handle the high computation complexity. The complexity is increased in many surveillance applications where more than one camera is used to monitor multiple spots or to monitor the same area using various angles. An implementation of a trick mode play and a frame buffer management scheme for the hardware-based H.264/AVC codec for multi-channel is presented in this paper. The experimental results show that exact trick mode play is possible using a standard H.264/AVC video codec with keyframe encoding feature at the expense of bitstream size increase.