• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1220-1225
• /
• 2009

In this paper, a tunable fiber feedback laser based on the use of Sagnac loop filter and fiber Bragg grating (FBG) is proposed. The Sagnac loop filter using a high birefringence fiber provides precise 0.33-nm channel spacing as a multi-wavelength grid filter. Ni-Cr wire wound on the FBG is useful to induce the thermo-optic effect of the fiber. Two types of FBG structures, which have a different length of wire, are demonstrated to show the wavelength shift and separation. To tune FBG by resistant heat, some current is supplied into the wire. When the wavelength matched with one of the cavity modes of Sagnac loop filter, the mode-locked lasing is occurred. The electrical power sensitivity of the resonant wavelength is measured to 1.75pm/mW. This laser configuration can be applied the electrical power system for monitoring the power fluctuation.

• Journal of Korea Game Society
• /
• v.12 no.1
• /
• pp.103-111
• /
• 2012

Games in 1970s have used the savings of analog wavelength as in music and the like on hardwares of small cassette, gramophone, and the like. Due to these configuration elements, durability has to be declined so much. In the event of using the music on the video game, more affordable method is to use the computer chip to convert the analog sound into the computer code to convert into the electric wavelength to send to the speaker. The sound effect of the game is generated in this method. The technical limit has been gradually overcome to grant more freedom to the composers and the sound track pre-recorded on the optic disc and the like has emerged. The game developers of today have made several attempts on the technology to produce the game music. This study has contemplated the process of advancement in the change of game music production with the influence on technology and business.

• Convergence Security Journal
• /
• v.12 no.1
• /
• pp.35-42
• /
• 2012

Increase of data traffic and the advent of new real-time services require to change from the traditional TDM-based (Time Division Multiplexing) networks to the optical networks that soft and dynamic configuration. Voice and lease line services are main service area of the traditional TDM-based networks. This optical network became main infrastructure that offer many channel that can convey data, video, and voice. To provide high resilience against failures, Packet-optical networks must have an ability to maintain an acceptable level of service during network failures. Fast and resource optimized lightpath restoration strategies are urgent requirements for the near future Packet-optical networks with a Generalized Multi-Protocol Label Switching(GMPLS) control plane. The goal of this paper is to provide packet-optical network with a hierarchical multi-layer recovery in order to fast and coordinated restoration in packet-optical network/GMPLS, focusing on new implementation information. The proposed schemes do not need an extension of optical network signaling (routing) protocols for support.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.557-559
• /
• 2012

The fire distress detection and rescue user terminal, which rescue the survivor by using the direction finding of distress place and sensing techniques, was design and implemented. The user terminal provides the rescue function in the place of evil surroundings that can not be available the communication facilities. The rescue user terminal provides the portable configuration, which consists of a RF board with radio frequency of 2.45 GHz and inner antenna, and a control board. The inner antenna with $60^{\circ}$ or $120^{\circ}$ directivity, which use the triangulation, detects the rescue signal from survivor. The rescue was managed by allotment of user ID and can use the bidirectional audio channel using radio frequency of 5.8 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.200-209
• /
• 2006

In recent years, studies on effective data services based on GMPLS are introduced so as to support excessive internet traffic. and filled operation can reduce transmission effectiveness. In this thesis we proposed merging algorithm with hierarchical structure and implementation procedure using ns -2 simulator. The structure composed of tunnel nodes and general nodes. Each node has threshold processing time. Result of that, the operation labels can be calculated. In order to evaluate the performance, we used ns-2 network simulator tool and used variable time parameters. The evaluated values can be used in surplus wavelength and be Possible to process additional traffic. Label merging will bring a decrease in the cost of channel sources for future network configuration.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.2
• /
• pp.234-238
• /
• 2008

Coarse pore filter could be an alternative of membrane for solid-liquid separation in an activated sludge reactor because of inexpensive cost of the filter material and high flux at low filtration pressure. However such filter module has much less specific filtration area compared to the membrane. Therefore a certain effort is required to increase the specific filtration area in the module design of such coarse pore filter for solid-liquid separation in an activated sludge reactor. In this study, tubular type coarse pore filter was designed at various diameter and configuration. The filtration performance was investigated to separate solid in the activated sludge reactor for domestic wastewater treatment. Tubular type coarse pore filter module could be successfully applicable to solid separation in the activated sludge reactor. The design parameters were the tube diameter of 10mm and vertical installation. Smaller diameter of the tube caused faster increase of the filtration pressure because of the hydraulic head loss in the tube channel.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.340-344
• /
• 1997

We proposed and demonstrated a tunable wavelength optical add/drop multiplexer(OADM) employing piezoactuated fiber grating pairs and polarization beam splitters. We used piezostack act as a fiber stretcher, using the fact that the resonant wavelength of the grating can be controlled by the axial strain along the fiber grating. The polarization controlled configuration showed high stability because the reflected signals from the two identical gratings are dropped or added not by interference but by polarizations of the beams. We could add and drop not noly 1549.3nm signal channel(original gratings), but also 1550.1nm(tuned gratings) with PZT actuators and in both cases, we found that the rejection of adjacent channels was more than -26dB, and signal leakage at the gratings was less than -34dB.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.10
• /
• pp.1050-1057
• /
• 2012

This study helps develop a cool body armor that maintains a tight-fit configuration to the body surface and evaluates the performance of newly developed body armor in a wear test. Three types of body armor were used for evaluation. One was a tight fitting body armor that was constructed to improve the degree of fit and ease of movement for Korean soldier using 3D technology. Another was ventilating body armor with attached spacers on the shoulder to reduce the thermal stress on the soldier. The third was a prevailing body armor produced by a Korean body armor company. In order to evaluate the performance of the body armor, a human wear test, a thermal mannequin test, and computational fluid dynamics (CFD) were executed. Five subjects participated in the wear test. Subjective wear sensation, total amount of sweat and dynamic change of clothing microclimate were observed during and after exercise on a treadmill; subsequently, it was found that subjects rated tight fitting body armor and ventilating body armor lighter, drier, and easier to move than the conventional body armor (p<.05). Total amount of sweat was the least in the case of ventilating body armor. The thermal resistance and vapor resistance of the ventilating body armor were improved remarkably. In addition, the skin temperature of the ventilating body armor with spacers was lower than the tight fitting body armor by at least $1^{\circ}C$ in the CFD result. It is noted that thermal-wet comfort of the 3D body armor with ventilating feature is superior to the conventional body armor, especially when the ventilating channel is not closed due to a backpack.

• The Korean Journal of Physiology and Pharmacology
• /
• v.9 no.5
• /
• pp.269-273
• /
• 2005

In horizontal cells (HCs) that were freshly dissociated from goldfish retina, two types of voltagedependent calcium currents ($I_{Ca}$) were recorded using a patch-clamping configuration: a transient type current and a sustained type current. The cell was held at -40 mV, and the prepulse step of -90 mV was applied before command pulse between -65 and +55 mV. The transient $Ca^{2+}$ current was activated by depolarization to around -50 mV from a prepulse voltage of -90 mV lasting at least 400 ms and reached a maximal value near -25 mV. On the other hand, the sustained $Ca^{2+}$ current was induced by pre-inactivation for less than 10 ms duration. Its activation started near -10 mV and peaked at +20 mV. $Co^{2+}$ (2 mM) suppressed both of these two components, but nifedipine ($20{\mu}M$), L-type $Ca^{2+}$ channel antagonist, blocked only the sustained current. Based on the activation voltage and the pharmacolog$I_{Ca}$l specificity, the sustained current appears to be similar to L-type $I_{Ca}$ and the transient type to T-type $I_{Ca}$. This study is the first to confirm that transient type $I_{Ca}$ together with the sustained one is present in HCs dissociated from goldfish retina.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1105-1110
• /
• 2000

In the past high cost and complex system configuration often discouraged hospitals from building teleradiology system or PACS(Picture Archiving and Communication System). But new standard platforms enable us to construct the same system with very low cost and simple configurations. internet as a communication channel made us overcome the regional limit and communication cost, and WWW technologies simplified the complex problems on the software developments, configurations and installations. So whoever has a Web browser to access internet can review medical images at anywhere. And we adopted DICOM technology which is a standard for medical imaging, thus we could resolve the interface problems among medical imaging systems such as modalities or archives. The implementation is comprised of three part DICOM/WWW interface subsystem, image format conversion subsystem and viewing applets which are displayed on users WWW browsers. In addition, Teleradiology intrenet PACS system includes DICOM converter that non-DICOM file format converts standard file format.