• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1564-1567
• /
• 2008

We demonstrate here a self-aligned printing approach that allows downscaling of printed organic thin-film transistors to channel lengths of 100 - 400 nm. A perfected down-scaled polymer transistors (L= 200 nm) showing high transition frequency over 1.5 Mhz were realized with thin polymer dielectrics, controlling contact resistance, and minimizing overlap capacitance via self-aligned gate configuration.

• Korean Management Science Review
• /
• v.18 no.2
• /
• pp.87-96
• /
• 2001

Mobility of service users makes Registration and Paging (R/P) procedures indispensable features in mobile communication networks. Importance of optimizing the configuration of R/P areas has been increased by the growth of R/P related signaling. Given the network topology (cell locations and adjacency between them) and R/P related traffics generated by each cell, we deal with the problem of finding optimal R/P areas minimizing the amount of R/P related signalling while the constraints on paging channel capacity and network configurations are satisfied.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2001.06a
• /
• pp.26-26
• /
• 2001

Inactivation of N-type calcium current has been reported to be both voltage dependent and Ca$\^$2＋/ dependent. We have investigated the effects of Ba$\^$2＋/ and Ca$\^$2＋/ on N-channel inactivation in rat superior cervical ganglion neurons using the whole cell configuration of patch clamp technique. Inactivation was larger in Ca$\^$2＋/ than in Ba$\^$2＋/ even with 20 mM BAPTA.(omitted)

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.1-6
• /
• 2007

In wireless mesh networks (WMNs), the end-to-end throughput of a flow decreases drastically according to the traversed number of hops due to interference among different hops of the same flow in addition to interference between hops of different flows with different paths. This paper proposes a distributed multi-channel assignment scheme based on hops (DMASH) to improve the performance of a static WMN. The proposed DMASH is a novel distributed multi-channel assignment scheme based on hops to enhance the end-to-end throughput by reducing interference between channels when transmitting packets in the IEEE 802.11 based multi-interface environments. The DMASH assigns a channel group to each hop, which has no interference between adjacent hops from a gateway in channel assignment phase, then each node selects its channel randomly among the channel group. Since the DMASH is a distributed scheme with unmanaged and auto-configuration of channel assignment, it has a less overhead and implementation complexity in algorithm than centralized multi-channel assignment schemes. Simulation results using the NS-2 showed that the DMASH could improve remarkably the total network throughput in multi-hop environments, comparing with a random channel assignment scheme.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.44-44
• /
• 2009

Recently, transparent ZnO-based TFTs have attracted much attention for flexible displays because they can be fabricated on plastic substrates at low temperature. We report the fabrication and characteristics of ZnO channel layers(ZnO TFTs) having different channel thicknesses. The ZnO film were deposited as active channel layers on $Si_3N_4/Ti/SiO_2p$-Si substrates by rf magnetron sputtering at $100\;^{\circ}C$ without additional annealing. Also the Zno thin films deposited at oxygen partial pressures of 40%. ZnO TFTs using a bottom-gate configuration were investigated. The $Si_3N_4$ film were deposited as gate insulator by PE-CVD at $15\;^{\circ}C$. All Processes were processed below $150^{\circ}C$ which is optimal temperature for flexible display and were used dry etching method.

• Journal of computational fluids engineering
• /
• v.12 no.3
• /
• pp.47-54
• /
• 2007

A periodic CFD approach for the performance analysis of compact high temperature heat exchangers is introduced and applied to selected benchmark problems, which are a fully developed 2D laminar heat transfer, a conjugate heat transfer between parallel plates which have exact solutions, and a heat transfer in a real high temperature heat exchanger module. The results for the 2D laminar heat transfer and the 2D conjugate heat transfer showed a very good agreement with the exact solutions. For the high temperature heat exchanger module, the pressure drops were predicted well but some difference was observed in the temperature parameters when compared to the full channel CFD analysis due to assumptions introduced into the periodic approach. Considering its assumptions and simplicities, however, the results showed that the periodic approach provides physically reasonable results and it is sufficient to predict the performance of a heat exchanger within an engineering margin and with much less CPU time than the case of a full channel analysis.

• Journal of Computing Science and Engineering
• /
• v.7 no.3
• /
• pp.168-176
• /
• 2013

Long-term evolution (LTE) is emerging as a major candidate for 4G cellular networks to satisfy the increasing demands for mobile broadband services, particularly multimedia delivery. Multiple-input multiple-output (MIMO) technology combined with orthogonal frequency division multiple access and more efficient modulation/coding schemes (MCS) are key physical layer technologies in LTE networks. However, in order to fully utilize the benefits of the advances in physical layer technologies, the MIMO configuration and MCS need to be dynamically adjusted to derive the promised gains of 4G at the application level. This paper provides a performance evaluation of video traffic with variations in the physical layer transmission parameters to suit the varying channel conditions. A quantitative analysis is provided using the perceived video quality as a video quality measure (evaluated using no-reference blocking and blurring metrics), as well as transmission delay. Experiments are performed to measure the performance with changes in modulation and code rates in poor and good channel conditions. We discuss how an adaptive scheme can optimize the performance over a varying channel.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.7 s.337
• /
• pp.1-4
• /
• 2005

A four-channel photoreceiver ways have been realized in a 0.8$\mu$m Si/SiGe HBT technology for the applications of parallel optical interconnects. The receiver array includes four-channel transimpedance amplifiers (TIAs) and p-i-n photodiodes, where the TIAs exploit a common-emitter (CE) input configuration. Measured results demonstrate that the four-channel CE TIA array provides 3.9GHz bandwidth, 62dB$\Omega$ transimpedance gain, 7.5pA/sqrt(Hz) average noise current spectral density, and less than -25dB crosstalk between adjacent channels with 40mW power dissipation.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3E
• /
• pp.69-76
• /
• 2008

Measurements of bubble size and distribution in the surface layer of the sea, wind speed, and variation of ocean environments were made continually over a four-day period in an experiment conducted in the South Sea of Korea during 17-20 September 2007. Theoretical background of bubble population model indicates that bubble population is a function of the depth, range and wind speed and bubble effects on sound speed shows that sound speed varies with frequency. Observational evidence exhibited that the middle size bubble population fit the model very well, however, smaller ones can not follow the model probably due to their short lifetime. Meanwhile, there is also a hysteresis effect of void fraction. Observational evidence also indicates that strong changes in sound speed are produced by the presence of swarms of micro bubbles especially from 7 kHz to 50 kHz, and calculation results are consistent with the measured data in the high frequency band, but inconsistent in the low frequency band. Based on the measurements of the sound speed and high frequency transmission configuration in the bubble layer, we present an estimation of underwater acoustic channel capacity in the bubble layer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.5
• /
• pp.516-521
• /
• 2010

In the high-speed packet service, next generation mobile communication system has emerged as a major feature. If the fire of these high-speed D kit services and non-continuous transmission of data due to the symmetrical nature of daeyiteo traffic for D-CDMA system has been actively studied. In this paper, we apply turbo codes for D-CDMA has been investigated. Considering the nature of the system configuration of the transmission frame type, such as physical channel structure and channel coding has been investigated. In addition to TD-CDMA system, one HARQ gibeopjung hase Combining the performance analysis techniques were applied.