• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2A
• /
• pp.130-136
• /
• 2002

It is required to control the picture quality among video sources when the multiple video sources are together transmitted through the channel of fried bandwidth such as satellite and terrestrial broadcasting. This paper presents a control method to keep the uniform picture quality among the video sources. We first find a model of distortion and titrate far the multiplexing system of multiple sources. Then we allocate the bitrate to each source for uniformly divided picture quality among the sources by using the distortion-bitrate relationship for the real-time implementation without time delay. It is shown by simulation that the proposed quality control method can keep almost uniform picture quality among the sources in comparison to the conventional control method.

• The KIPS Transactions:PartA
• /
• v.18A no.1
• /
• pp.25-32
• /
• 2011

NoC is actively being studied recently in order to overcome the limitations of shared-bus architecture. We proposed an NoC architecture which employs a buffer that plays a similar role of a proxy server in a computer network to enhance the communication efficiency of NoC architecture. In the proposed NoC architecture, whenever the master has a difficulty in communicating with the slave directly, the master communicates with the proxy server which is able to communicate with the slave on behalf of the master. With the proposed scheme in NoC, we can increase the speed and the bandwidth of communication channel. The experimental results showed that overall communication efficiency was significantly improved by sending the packets to the proxy server rather than holding them in the switch buffer.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.370-382
• /
• 2013

Distributed massive MIMO systems, which have high bandwidth efficiency and can accommodate a tremendous amount of traffic using algorithms such as zero-forcing beam forming (ZFBF), may be deployed in large public venues with the antennas mounted under-floor. In this case the channel gain matrix H can be modeled as a multi-banded matrix, in which off-diagonal entries decay both exponentially due to heavy human penetration loss and polynomially due to free space propagation loss. To enable practical implementation of such systems, we present a multi-banded matrix inversion algorithm that substantially reduces the complexity of ZFBF by keeping the most significant entries in H and the precoding matrix W. We introduce a parameter p to control the sparsity of H and W and thus achieve the tradeoff between the computational complexity and the system throughput. The proposed algorithm includes dense and sparse precoding versions, providing quadratic and linear complexity, respectively, relative to the number of antennas. We present analysis and numerical evaluations to show that the signal-to-interference ratio (SIR) increases linearly with p in dense precoding. In sparse precoding, we demonstrate the necessity of using directional antennas by both analysis and simulations. When the directional antenna gain increases, the resulting SIR increment in sparse precoding increases linearly with p, while the SIR of dense precoding is much less sensitive to changes in p.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.25-30
• /
• 2005

We propose and design a fully conversed Ethernet and TDM transport system to guarantee qualify of service for Ethernet packet. Developed convergence system can support not only L2 VPN service and premium multimedia service based on MPLS protocol but also TDM leased line service, simultaneously. Developed convergence system has the advantage of providing high reliability that realizes high-quality and real time communications due to assign QoS profile and guarantee bandwidth per channel consist of VCGs without affect adjacent channels. Evaluation for proposed system was successfully performed within the ling network.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.281-286
• /
• 2011

DVB-T2 is a next generation DTV transmission standard, which supports various channel bandwidths. Since the symbol rate of the DVB-T2 signal is changed according to its bandwidth, the received signal needs to be sampled at a different frequency. The sampling frequency should be also adjusted depending on the sampling frequency offset due to the frequency error in the local oscillator. The sampling frequency can be locked into the symbol frequency by resampling the sampled data by ADC running at a fixed frequency. In this paper a resampler architecture for DVB-T2 is proposed. And the simulation results reveal the spectral characteristics of each subcarriers used in DVB-T2 system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.9
• /
• pp.740-745
• /
• 2013

This paper presents BER, FER performance comparison, especially on PHY mode of IEEE 802.15.4g and IEEE 802.11 under AWGN channel through a simulation, which is communication method using identical frequency bandwidth in M2M environment. This considers suitable communication method of required parameter. It is advantageous that FSK method is used in situations where the system require low complexity and inexpensive structure. And OFDM method is considered for system performance. Further, when the high throughput and various traffic characteristics of the system are required, it can be considered that the method of IEEE 802.11 OFDM PHY mode is used.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.5
• /
• pp.345-352
• /
• 2004

Currently, high data rate PLC(Power Line Communications), up to 100 Mbps, which use frequency bandwidth between 2 MHz and 30 MHz is investigated very hard, and commercial PLC modem for low voltage powerline network (indoor) is coming soon into communication market. For the purpose of developing a fit communication system which has little distortion of signal and attenuation, it is surely necessary to know about channel environments of powerline. Especially, the impedance measurement of the powerline and impedance matching are very important. As is known, since medium-voltage powerline (22.9 ㎸) is still working, it is not so simple to measure the powerline impedance. In our study, a portable impedance measurement equipment is developed. It consists of coupling capacitor, a drain coil and impedance matching transformer. The equipment is easily connected to medium voltage line and impedance of power line is measured using a network analyzer. Also, measurement results are used for impedance matching of PLC signal. In fact, matching transformer with several different impedances are used. The matching transformer is connected between coupling capacitor and signal port. In this paper, the developed portable impedance measurement equipment and impedance measurement results are presented. Also impedance matching technique using matching transformers will be explained. We showed the result of the improved performance by the impedance matching.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.3
• /
• pp.289-295
• /
• 1998

The purpose of this paper is to propose an improvement method of BER for coded 16-QAM under Rayleigh fading channel. To overcome the BER degradation due to the fading under mobile communication, we apply delay modulation technique which is efficient to get both a coding gain and approximately one-half those needed by Manchester coding on bandwidth requirements. Especially, the delay modulation scheme is insensitive to the $180^{\circ}$phase ambiquity common to NRZ-L and Manchester coding schemes. From the computer simulation, BER performance of our scheme has achieved about 3.8 dB improvement of about $10^{-4}$, compared to Manchester coded 16-QAM.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.51-59
• /
• 2004

We design multilevel coding(MLC) with a semi bit-interleaved coded modulation(BICM) scheme based on low density parity check(LDPC) codes. Different from traditional designs, we joint the MLC and BICM together by using the Gray mapping, which can transmit the multimedia data over several equivalent channels with different code rates. To get a good performance from signal-to-noise ratio(SNR) very close to the capacity of the additive white Gaussian noise(AWGN) channel, random regular LDPC code and a simple semi-algebra LDPC(SA-LDPC) code are discussed in MLC with parallel independent decoding(PID). Finally, the numerical results demonstrate that the proposed scheme could achieve both power and bandwidth efficiency for multimedia communication system.

• Journal of electromagnetic engineering and science
• /
• v.15 no.1
• /
• pp.53-58
• /
• 2015

For the testing of nonlinear power amplifiers, this paper suggests an approach to design optimized multisine signals that could be substituted for the original modulated signal. In the design of multisines, complex coefficients should be determined to mimic the target signal as much as possible, but very few methods have been adopted as general solutions to the coefficients. Furthermore, no solid method for the phase of coefficients has been proven to show the best resemblance to the original. Therefore, in order to determine the phase of multisine coefficients, a time-domain nonlinear optimization method is suggested. A frequency-domain-method based on the spectral response of the target signal is also suggested for the magnitude of the coefficients. For the verification, multisine signals are designed to emulate the LTE downlink signal of 10 MHz bandwidth and are used to test a nonlinear amplifier at 1.9 GHz. The suggested phase-optimized multisine had a lower normalized error by 0.163 dB when N = 100, and the measurement results showed that the suggested multisine achieved more accurate adjacent-channel leakage ratio (ACLR) estimation by as much as 12 dB compared to that of the conventional iterative method.