• Title/Summary/Keyword: changes of grain size

Search Result 267, Processing Time 0.028 seconds

Impacts of wave and tidal forcing on 3D nearshore processes on natural beaches. Part II: Sediment transport

  • Bakhtyar, R.;Dastgheib, A.;Roelvink, D.;Barry, D.A.
    • Ocean Systems Engineering
    • /
    • v.6 no.1
    • /
    • pp.61-97
    • /
    • 2016
  • This is the second of two papers on the 3D numerical modeling of nearshore hydro- and morphodynamics. In Part I, the focus was on surf and swash zone hydrodynamics in the cross-shore and longshore directions. Here, we consider nearshore processes with an emphasis on the effects of oceanic forcing and beach characteristics on sediment transport in the cross- and longshore directions, as well as on foreshore bathymetry changes. The Delft3D and XBeach models were used with four turbulence closures (viz., ${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES) to solve the 3D Navier-Stokes equations for incompressible flow as well as the beach morphology. The sediment transport module simulates both bed load and suspended load transport of non-cohesive sediments. Twenty sets of numerical experiments combining nine control parameters under a range of bed characteristics and incident wave and tidal conditions were simulated. For each case, the general morphological response in shore-normal and shore-parallel directions was presented. Numerical results showed that the ${\kappa}-{\varepsilon}$ and H-LES closure models yield similar results that are in better agreement with existing morphodynamic observations than the results of the other turbulence models. The simulations showed that wave forcing drives a sediment circulation pattern that results in bar and berm formation. However, together with wave forcing, tides modulate the predicted nearshore sediment dynamics. The combination of tides and wave action has a notable effect on longshore suspended sediment transport fluxes, relative to wave action alone. The model's ability to predict sediment transport under propagation of obliquely incident wave conditions underscores its potential for understanding the evolution of beach morphology at field scale. For example, the results of the model confirmed that the wave characteristics have a considerable effect on the cumulative erosion/deposition, cross-shore distribution of longshore sediment transport and transport rate across and along the beach face. In addition, for the same type of oceanic forcing, the beach morphology exhibits different erosive characteristics depending on grain size (e.g., foreshore profile evolution is erosive or accretive on fine or coarse sand beaches, respectively). Decreasing wave height increases the proportion of onshore to offshore fluxes, almost reaching a neutral net balance. The sediment movement increases with wave height, which is the dominant factor controlling the beach face shape.

Patterns in Benthic Polychaete Community and Benthic Health Assessment at Longline and Bottom Culture Shellfish Farms in Gangjin Bay, Namhae, Korea (남해 강진만 수하식 및 살포식 패류양식장의 다모류군집구조 양상과 저서생태계 건강도 평가)

  • Sunyoung Kim;Sang-Pil Yoon;Sohyun Park;Rae Hong Jung
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.30 no.1
    • /
    • pp.20-31
    • /
    • 2024
  • This study was conducted to investigate the changes in the structure of benthic communities resulting from aquaculture activities and to assess the benthic health status of surface sediment in Gangjin Bay, a region known for concentrated shellfish aquaculture on the southern coast of Korea. Survey stations were divided into longline culture, bottom culture, and non-cultivation areas. The spatiotemporal distribution of physiochemical factors such as the grain size, water temperature, salinity, and total organic carbon in Gangjin Bay showed no significant differences between sampling stations. However, the species number, density, and diversity were relatively lower at the sampling stations in the bottom culture areas than at the other stations throughout the entire survey period. Cluster analysis and principal coordinates analysis also clearly distinguished the benthic communities in the bottom culture areas from those in the other sampling areas. At the sampling stations in the longline culture and non-cultivation areas, Scolectoma longifolia and Sigambra tentaculata, which are indicator species of organically enriched areas, appeared as dominant species. However, excluding some stations influenced by physical factors such as the water depth and current speed, the occupancy rate was not high. The health assessment results, conducted using the fisheries environment assessment method, revealed good conditions with Grades 1 and 2 across the entire area. However, an examination of the spatiotemporal changes in benthic communities and the benthic health index indicated that the benthic environment in the bottom culture areas was affected by physical disturbances.

High Temperature Oxidation Behavior of Fe-14Cr Ferritic Oxide Dispersion Strengthened Steels Manufactured by Mechanical Alloying Process (기계적 합금화 공정으로 제조된 Fe-14Cr Ferritic 산화물 분산 강화(ODS) 합금 강의 고온 산화 거동)

  • Kim, Young-Kyun;Park, Jong-Kwan;Kim, Hwi-Jun;Kong, Man-Sik;Lee, Kee-Ahn
    • Journal of Powder Materials
    • /
    • v.24 no.2
    • /
    • pp.133-140
    • /
    • 2017
  • This study investigates the oxidation properties of Fe-14Cr ferritic oxide-dispersion-strengthened (ODS) steel at various high temperatures (900, 1000, and $1100^{\circ}C$ for 24 h). The initial microstructure shows that no clear structural change occurs even under high-temperature heat treatment, and the average measured grain size is 0.4 and $1.1{\mu}m$ for the as-fabricated and heat-treated specimens, respectively. Y-Ti-O nanoclusters 10-50 nm in size are observed. High-temperature oxidation results show that the weight increases by 0.27 and $0.29mg/cm^2$ for the as-fabricated and heat-treated ($900^{\circ}C$) specimens, and by 0.47 and $0.50mg/cm^2$ for the as-fabricated and heat-treated ($1000^{\circ}C$) specimens, respectively. Further, after 24 h oxidation tests, the weight increases by 56.50 and $100.60mg/cm^2$ for the as-fabricated and heat-treated ($1100^{\circ}C$) specimens, respectively; the latter increase is approximately 100 times higher than that at $1000^{\circ}C$. Observation of the surface after the oxidation test shows that $Cr_2O_3$ is the main oxide on a specimen tested at $1000^{\circ}C$, whereas $Fe_2O_3$ and $Fe_3O_4$ phases also form on a specimen tested at $1100^{\circ}C$, where the weight increases rapidly. The high-temperature oxidation behavior of Fe-14Cr ODS steel is confirmed to be dominated by changes in the $Cr_2O_3$ layer and generation of Fe-based oxides through evaporation.

A design guide to minimize frost heave in unbound pavement layers over box culverts (저토피부 암거상부 포장의 도상피해 예방을 위한 단명설계)

  • Seo, Young-Guk
    • International Journal of Highway Engineering
    • /
    • v.9 no.3
    • /
    • pp.111-121
    • /
    • 2007
  • During the whole month of December in 2005, Korea experienced both heavy snowfall and freezing temperature in southeast regions, which had caused frost related damages to many pavements laid on top of box culverts. In-situ observation revealed that the formation of ice lenses in subgrade and subsequent unbound layers led to upward heaving and transverse cracks in concrete and asphalt pavements. This has affected the long-term performance of pavements, as well as has threatened drivers' safety for a while. Recently, Korea Expressway Corporation has proposed a design guide to better protect newly constructed unbound pavement layers over culverts from frost heave. A trench drainage system has been selected to effectively draw off water and to alleviate pore-water pressure in soils during the coldest season. This paper presents experimental and analytical backgrounds behind this new design guide. Soil specimens retrieved from the sites are tested to quantify clay content and to estimate the permeability of subgrade. A 2-D ground seepage analysis has been conducted to better understand the changes in pore water pressures as a function of grain size. Finally, an optimum size of trench drainage is determined based on numerical analysis and workability in the field.

  • PDF

High-Resolution of Paleoenvironmental Reconstruction and Sea-Level History in Delaware Bay, the East Coast of U.S.A. (미국동부 델라웨어만의 고정밀도 해수면 역사와 고환경 복원)

  • YI, HI-IL;WEHMILLER, JOHN F.
    • 한국해양학회지
    • /
    • v.30 no.4
    • /
    • pp.320-331
    • /
    • 1995
  • The closely spaced cores were analyzed to find detailed reconstruction of paleoenvironments and sealable changes along the Delaware Bay coast. Three areas, Kitts Hummock Beach mars, the St. Jones River marsh, and Bowers marsh near the St. Jones River's mouth, were chosen because these areas are compose of their own geomorphic characteristics and sea-level history. since significance of the stratigraphic correlations was to determine sedimentary fancies and paleoenvironments, multidisciplinary methods such as lithological description, grain-size analysis, organic/inorganic content, water content, mineral composition, botanical analysis, micropaleontological analysis, and /SUP 14/C datings were performed. Five major divisions of marsh environments were recognized in the stratigraphic sections: freshwater marsh, initialfreshwater marsh, slightly brackish marsh, brackish marsh, and salt marsh. Most of the lower part in the stratigraphic sections show freshwater marsh. On the top of this, either brackish marsh or tidal flat/tidal stream was recorded. The pro-Holocene sediments consist of sand, mud, and sandy mud, The pre-Holocene configuration played an important role for developing the Holocene Paleoenvironmental changes. The irregular configuration of the pre-Holocene sediments consist of sand, mud, and sandy mud. The pre-Holocene configuration played an important role for developing the Holocene Paleoenvironmental changes. The irregular configuration of the pre-Holocene surface within short distances permitted the concurrent development of variable environments such as freshwater marsh, brackish marsh or salt marsh at similar elevations. The freshwater marsh in this case was formed in the areas of isolation, so saline-water cannot encroach upon these areas. This complex development of paleoenvironments leads to a difficulty in stratigraphic correlation and interpretation of local relative sea-level changes. The deposition of subsurface sediments was affected by sediment supply, compaction, fluvial activity, biological competition, local tectonics and isostacy, climate and local relative sea-level changes. It was interpreted that the positions in the changes from freshwater environments to brackish environments or ice versa are the turning points of transgressions and regressions. Therefore, multiple transgressions and regressions were identified in the stratigraphic sections of the study area.

  • PDF

Morphologic Response of Gravel Beach to Typhoon Invasion - A Case Study of Gamji Beach Taejongdae in Busan (태풍 내습 시 자갈 해빈의 지형반응 - 부산 태종대 감지 해빈의 사례)

  • Lee, Young Yun;Chang, Tae Soo
    • Journal of the Korean earth science society
    • /
    • v.41 no.1
    • /
    • pp.19-30
    • /
    • 2020
  • To understand the impact of typhoons on Gamji gravel beach Taejongdae in Busan, we carried out beach profiling using a VRS-GPS system and a Drone photogrammetry for the typhoons 'Kong-rey' invaded in October 2018 and 'Danas' in July 2019. In addition, grain sizes are analyzed to investigate the overall distribution pattern of gravels on the beach, and the beach topography is surveyed periodically to confirm the recovery rate of the beach. Grain-size analysis reveals that mean gravel sizes, in general, become finer from -6.2Φ to -5.4Φ towards the east in the seashore line direction. Variation in mean sizes is obviously observed in the cross-shore direction. Gravels in the swash zone are relatively fine about -4.5Φ in size and equant in shape, whereas the coarse and oblate gravels ranged from -5Φ to -6Φ are found in the berm. Gamji gravel beach particularly has two lines of berms: a lower berm situated facing beach and an upper berm about 10 m landward. After the typhoon Kong-rey passed by, about 1.4 m of severe erosion in upper berm occurred, and the berm eventually disappeared. On the backshore of the upper berm about 50 cm of erosion took place so that the elevation became lower. However, tangible erosion was not observed in the lower berm. When typhoon Danas hit, rated as mild storm, both upper and lower berm were eroded out. However, about 50 cm of deposition occurred only in the backshore. Only three days later, the new lower berm was formed, meaning that sedimentation rate must be high. This result indicates that Gamji gravel beach is recovered very fast from erosion caused by the typhoons when it is under the fair-weather condition even though beach morphology changes dramatically in a short period of time. Gravel beach is estimated to be or evaluated very resilient to typhoon erosion.

Last Glacial Maximum-Holocene Variability in Geochemical Records of a Core Sediment from the Southern Part of the Ulleung Basin, East Sea: Implications for Paleoceanographic Changes (동해 울릉분지 남단 주상퇴적물에 대한 최종빙기-홀로세간의 지화학적 기록 변화: 고해양환경 변화)

  • Huh, Sik;Han, Sang-Joon;Hyun, Sang-Min
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.6 no.2
    • /
    • pp.71-80
    • /
    • 2001
  • To understand paleoceanographic environmental changes in the Esat Sea during the transitional period between Holocene and last glacial maximum, geochemical high resolution study was conducted by using a piston core(95PC-1) samples collected from the southernmost part of the Ulleung Basin. Geochemical results reveal that major distinctive paleoceanographic variations in transitional period are prominent. Major elemental concentrations show distinctive variations between glacial and Holocene suggesting changes in sediment supply. $TiO_2/Al_2O_3$ ratio of the sediment indicates different sediment composition between Holocene and glacial period. The content of total organic carbon ranging from 0.5% to 4% during transitional period. These vslues showed 2-4 times and two times higher than those of last glacial and Holocene, respectively. The C/N ratios deduced from organic matters exceed10 during transitional period suggesting terrigenous organic matter are supplied from continent, especially during last glacial maximum. Carbonate contents are relatively stable during Holocene and last glacial maximum with gradual decrease during glacial period with high fluctuation during transitional period. The variations of chemical index of weathering (CIW) also show a distinctive variation between glacial and Holocene, which is coincident with those of carbonate and organic carbon. The grain size distribution indicates that the difference content of silt fraction during Holocene and glacial period is closely related with climatic effect during glacial period. Therefore geochemical differences in sediment composition between Holocene and last glacial maximum is thought to be related to paleoceanographic, sea-level change and local paleoclimatic changes.

  • PDF

Development Process of Agriculture And Technology -A Case Study of Korea

  • Gajendra-Singh;Ahn, Duck-Hyun
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 1993.10a
    • /
    • pp.109-118
    • /
    • 1993
  • Development process of agricultural technology has been studied with a case study of Korean agriculture. Technological is considered as a transformer of inputs into outputs and hence technological appropriateness, an important aspect of agricultural development strategies, is considered as a dynamic concepts. Considering the concept of agricultural system as a delivery system for providing essential materials and services to producers and consumers, it has been divided into two major groups of dimensions vis. external challenge dimensions and internal response dimensions. Market, investment and agro-ecosystem constitute the external challenge dimensions : whereas trade , technology as well as production and resources allocation constitute internal response dimensions. The system manager is responsible for maintaining equilibrium in the mentioned six sub-systems. Two kinds of alternatives paths of technological development viz. land saving technology and labour saving technolog have been studied. Technology is considered as a combination of four basic components viz. facilities, abilities, facts and frameworks. Adoption of innovation in agriculture depends on profitability, awareness, risk aversion, financial capacity, institutional infrastructure, availability of physical inputs and adaptability to the local conditions. For a cast study of Korea, changes in the agricultural system through external challenge dimensions are investigated. The impacts of industrialization on agro-ecosystem reported are shift of labour from the agricultural sector to non-agricultural sectors and continuously increasing demand of farm the agricultural sector to non-agricultural sectors accompanied by increase in land prices. The impacts on the commodity market discussed are shift in demand from rice, barley and other cereals to meat , dairy products and vegetables : and increasing in supply capacity of agricultural inputs. The process of agricultural development from 1962 to 19 1 9 (i.e. from start of the first to the end of the sixth five year plan) are also discussed in details with several policy measures taken. The trend of agricultural income and productivity are also analyzed. The main cause of increase in the agricultural income is considered as increase in labour productivity. The study revealed that during the span of 1965-88, holding size has not changed significantly, but both the land and labour productivity increased and so did the agricultural income. R&D activities in Korea have changed over time in three stages vix. import of improved technology, localization by adaptive research and technological mastery. For the new technology to be made affordable to farmers, policy measures like fertilizer and food grain exchange system, dual price system in rice and barely and loan for machinery were strengthened.

  • PDF

The Community Structure of Meiofauna in Marian Cove, King George Island, Antarctica (남극 킹조지섬 마리안소만의 중형저서동물 군집구조)

  • Hong, Jung-Ho;Kim, Ki-Choon;Lee, Seung-Han;Back, Jin-Wook;Lee, Dong-Ju;Lee, Won-Choel
    • Ocean and Polar Research
    • /
    • v.33 no.3
    • /
    • pp.265-280
    • /
    • 2011
  • The temporal dynamics of the meiofauna community in Marian Cove, King George Island, Antarctica were observed from March 7 to December 21 2007. Nine meiofauna taxa were found, with nematodes the most dominant group, making up 92.97% of the total meiofauna density, followed by harpacticoid copepods (3.18%). Meiofauna abundance ranged from 123 to 874 individuals per 10 $cm^2$ (mean 464 inds.10 $cm^{-2}$), which is lower than that found in some polar and temperate regions. The lowest meiofauna abundance was found in the 26th April sample (III) and the highest meiofauna abundance was found in the March 23rd sample (II). There was no correlation between meiofauna abundance and season. The seasonal changes were likely caused by meltwater runoff, and there were the physical disturbances on the bottom sediment by huge iceberg. Biomass of meiofauna varied between 20.36 and 101.02 ${\mu}gC{\cdot}10\;cm^{-2}$, and overall mean biomass was 54.17 ${\mu}gC{\cdot}10\;cm^{-2}$ during the study periods. More than 80% of meiofauna was concentrated in the upper 2 cm of the sediment, and density decreased with depth. The mean diversity index was 0.37, and the ratio between the abundance of nematodes: and harpacticoids (N/C) ratio ranged from 7.31 to 95.04 (mean 26.39). NMDS analysis divided the community into three groups: A (III, IV, V, VII, VIII), B (II, IX, XI, XII) and C (I, V, X). The results of ANOSIM and SIMPER analysis revealed significant differences in community structure among three groups and major contributed meiofauna taxon in grouping were nematodes and copepods. No significant correlations were observed between major meiofauna taxon and environmental factors. Thirteen species in 12 genera representing nine families of harpacicoids were recorded. Ancorabolidae was the most diverse family, and Heteropsyllidae was the most abundant. The correlation analysis between benthic harpacticoid copepods and environmental factors showed that some species were affected by water temperature, sediment temperature, salinity, chlorophyll a concentration, grain size of the sediments and heavy metal contents of the sediments. These data describe the usefulness of benthic harpacticoid copepods as biological indicator species in Antarctic regions.

Seasonal Variations of Sedimentary Processes on Mesotidal Beach in Imjado, Southwestern Coast of Korea (한반도 서해남부 임자도 해빈 퇴적작용의 계절적 변화)

  • 류상옥;장진호;조주환;문병찬
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.9 no.3
    • /
    • pp.83-92
    • /
    • 2004
  • A continuous monitoring of textural characteristics of surface sediments, sedimentation rates and beach profile was carried out to investigate the seasonal variations of sedimentary processes in the Imjado beach, southwestern coast of Korea for two years. The beach profiles consist of steep beach face and relatively flat middle and low tide beaches. The slope of the beach face increases in summer and decreases in winter, in good accordance with the standard beach cycle. Ridge and runnel systems are well developed in the middle and low tide beaches during the summer, but these structures are replaced by mega-ripples during the winter. The sediments are fining southward as well as landward. The mean grain-size tends to be increasingly coarser during seasons of autumn and winter on the north beach and during seasons of winter and spring on the south one. In addition, the sediments are eroded on the north beach and accumulated on the south one as a whole. These are probably due to southward transportation of the sediments as long-shore current (NE-SW) runs around the coastal line of the beach. However, the seasonal variations in accumulation rates are very complex and irregular. It is considered that the Imjado beach represents in non-equilibrium state, as a result of coastal and submarine topographic changes by artificial agents and sea-level uprising associated with global warming.