• 한국식품영양과학회지
• /
• 제23권4호
• /
• pp.641-646
• /
• 1994

changes in HMF content, capsanthin content, Hunter tirstimulus values, color-preference, and pruchasing intent were investigated during storage of industry-produced kochujang packed with polyethylene and nylon complex film at 13, 27 and 37$^{\circ}C$. HMF content, which was very low at initial , did not showed significant increase during storage at 13$^{\circ}C$ for 180 days, but the accumulation of HMF was accelerated by higher temperature. Capsanthin content decreased more rapidly at higher temperature . L values decreased up to 60 days of storage and the storage temperature had little influence on the rate . But, after 60 days, L value decreased more slowly at 13 than at 27 and 37$^{\circ}C$ , a and b values showed linear decrease at 37$^{\circ}C$, but increase in a and b values at 13 and 27 $^{\circ}C$ during early storage was followed by decrease. ΔE decreased more rapidly at higher temperature . Color-preference and purchasing-intent for kochujang decreased during storage at 27 and 37 $^{\circ}C$, but did not show significant changes during storage at 13 $^{\circ}C$ for 180 days. L, and ΔE values of kochujang stored at 37 and 27Δ showed positive correlation with color-preference, but Hunter tristimulus values of Kochujang stored at 13$^{\circ}C$ did not show not any significant correlation with color preference.

• Preventive Nutrition and Food Science
• /
• 제5권4호
• /
• pp.197-199
• /
• 2000

Clarified fruit and vegetable juices (apple, carrot and tangerine) were produced using ultrafiltration and their color change due to the mixing ratio were evaluated. clarification was carried out by passing he supernatant of extracted juice through a filter and also by using a membrane of molecular weight cut-off 10,000 Daltons to obtain the juice ultrafiltrates. The mixing ratio between apple and carrot juices was kept constant at 1:1 while increasing the amount of tangerine juice according to 10, 20, 30, 40 and 50% an stored at 4$^{\circ}C$ prior to the color measurement. Hue angle ({TEX}$h_{ab}${/TEX}) and {TEX}$L^{*}${/TEX}-value increased as the tangerine mixing ratio increased. The color difference indicated by ΔE-value also increased as the amount of tangerine increased indicating that the color of the mixed juice became pale and the changes were slight but distinctive. On the other hand, chroma ({TEX}$C^{*}${/TEX}), {TEX}$La{*}${/TEX}- and {TEX}$b^{*}${/TEX}-values decreased as the tangerine mixing ratio increased indicating that the color of the mixed juice became slightly more grayish and the samples were becoming les yellow. A simple mathematical model to predict each color characteristic is proposed.

• 대한치과교정학회지
• /
• 제50권2호
• /
• pp.86-97
• /
• 2020

Objective: To propose a three-dimensional (3D) method for evaluating temporomandibular joint (TMJ) changes during Twin-block treatment. Methods: Seventeen patients with Class II division 1 malocclusion treated using Twin-block and nine untreated patients with a similar malocclusion were included in this research. We collected their cone beam computed tomography (CBCT) data from before and 8 months after treatment. Segmentations were constructed using ITK-SNAP. Condylar volume and superficial area were measured using 3D Slicer. The 3D landmarks were identified on CBCT images by using Dolphin software to assess the condylar positional relationship. 3D models of the mandible and glenoid fossa of the patients were constructed and registered via voxel-based superimposition using 3D Slicer. Thereafter, skeletal changes could be visualized using 3DMeshMetric in any direction of the superimposition on a color-coded map. All the superimpositions were measured using the same scale on the distance color-coded map, in which red color represents overgrowth and blue color represents resorption. Results: Significant differences were observed in condylar volume, superficial area, and condylar position in both groups after 8 months. Compared with the control group (CG), the Twin-block group exhibited more obvious condyle-fossa modifications and joint positional changes. Moreover, on the color-coded map, more obvious condyle-fossa modifications could be observed in the posterior and superior directions in the Twin-block group than in the CG. Conclusions: We successfully established a 3D method for measuring and evaluating TMJ changes caused by Twin-block treatment. The treatment produced a larger condylar size and caused condylar positional changes.

• Clinical Endoscopy
• /
• 제56권5호
• /
• pp.546-552
• /
• 2023

Techniques for upper gastrointestinal endoscopy are advancing to facilitate lesion detection and improve prognosis. However, most early tumors in the upper gastrointestinal tract exhibit subtle color changes or morphological features that are difficult to detect using white light imaging. Linked color imaging (LCI) has been developed to overcome these shortcomings; it expands or reduces color information to clarify color differences, thereby facilitating the detection and observation of lesions. This article summarizes the characteristics of LCI and advances in LCI-related research in the upper gastrointestinal tract field.

• 한국멀티미디어학회논문지
• /
• 제24권1호
• /
• pp.30-39
• /
• 2021

Research in the field of health lighting has continued to advance to reproduce the color temperature of natural light which periodically changes. However, most of this research could only reproduce a uniform circadian color temperature of natural light, therefore failing to realize the characteristics of the circadian cycle of color temperature difference by latitude and longitude. To reproduce the color temperature of natural light on which the characteristics of a region are reflected, the collection technology of real-time characteristics of natural light is needed. If the color temperatures which are not within a periodical pattern due to climate changes, etc., are measured, it will be difficult to judge the occurrence (presence) of the anomalies and to reproduce the circadian cycle of the color temperature of natural light. Therefore, this study proposes an algorithm for judging the anomalies in real time based on the sliding window to reproduce the color temperature of natural light. First, the natural light characteristics DB collected through the on-site measurement were analyzed, the differential values at a one-minute interval were calculated and examined, and then representative color temperature circadian patterns by solar terms were drawn. The anomalies were then detected by the application of the sliding window that calculated the deviation of the color temperature for the measured color temperature data set, which was collected through RGB sensors, while moving along the time sequence. In addition, the presence of anomalies was verified through the comparison study between the detection results and the representative circadian cycle of the color temperature by solar term. The judgment method for the anomalies from the measured color temperature of natural light was proposed for the first time, confirming that the proposed method was capable of detecting the anomalies with an average accuracy of 94.6%.

• 복식
• /
• 제62권8호
• /
• pp.149-165
• /
• 2012

This study is to understand the characteristics of women's Hanbok fashion in the modern Korea by investigating the features of colors and color arrangements of remaining relics. The summary of findings from the researches and analysis from over 1840 pieces of Hanbok relics in modern Korea are as follows: First, since western-style cloth were introduced and utilized for Hanbok from 1960, the number of colors have drastically increased. However, the most commonly used colors and parts throughout all the periods remained the same. These are Y, R and white colors for Jeogori and Y, R and PB colors for Chima. And, as for the representative color of each of the six periods, significant changes of color were found Jeogori in the 1960~1970s. While no clear color changes were found in the period prior to the 1960s and after the 1980s. Secondly, as for the color tones, although the high luminosity-low chroma were generally used over the periods, it was observed that various colors of low luminosity-high chroma began to be used from 1960 and so Jeogori became more colorful. And lastly, Y and white color were taking up the highest percentage in the solid color arrangement. When composing 2 colors, the Y tone color dominants with R tone as sub-color was the most prevalent, and when 3 and 4 colors were combined, the extra color were increasingly seen in the upper garment cuff and collar so that the arrangement of different colors increased the aesthetic symbols when combined with the colors of the Chima.

• 한국인쇄학회지
• /
• 제25권2호
• /
• pp.15-28
• /
• 2007

For the color offset printing, it starts with input of data. The past days, drum scanner or flat scanner used to input of data, but now it changes gradually into using of digital camera because digital camera become popular. The high quality digital camera saves as a data(RAW format), sRGB which have built in digital camera, or Adobe RGB format. sRGB of ICC(International Color Consortium) profile is a standard color gamut of digital camera. Distribution of color gamut in sRGB is less than Adobe RGB have a distribution in ICC profile. sRGB also can not be expressed in some specific part, because distribution of color gamut in sRGB is not able to cover all parts in ICC Profile of international standards CMYK. It is more popular to use Adobe RGB than sRGB to do high quality offset printing and software basis color setting in Europe and Japan. In spite of this data basis, there is a difficulty of doing color correction between the color proofing prints and the final prints. To see how the software color setting effects to RGB data, this thesis will use Gretag Macbeth ColorChecker 24 patch which has the most general natural color chart to compare sRGB and Adobe RGB to check the differences of color changes. It will use the several factors that came out from the process of making ICC Profile to figure out the optimum In-house profile. It also compares the differences of using matt paper and glossy paper to do best quality color proof offset printing, and how the Rendering Intent effects the proof print.

• 한국인쇄학회지
• /
• 제18권2호
• /
• pp.29-40
• /
• 2000

Recently. color proofing in printing industry grow rapidly. If an order decide color from known color information in the case of color reproduction, we can reduce expenses and time. In color proofing the best important point must be closed proofed color to primary color and secondary color. Model-based approaches have the advantages of faster recharacterization and the opportunity of simulating product enhancements such as changes in ink properties and halftoning. In this paper, we transformed the dot area of CMYK to CIELAB color space using color reproduction models. Firstly, we measured spectral reflectance of primary color printed by Matchprint II and the data was used to find tone reproduction curve using regression equation, and than we applied at primary color model, such as Murray-Davies, Yule-Nilsen, and mixed color model, such as Kubelka-Munk, relaxed version of spectral Neugebauer. In such results, the Kubelka-Munk model resulted in the best spectral reconstruction accuracy followed by relaxed version of spectral Neugebauer model, color difference is 2.8401.

• 복식
• /
• 제58권6호
• /
• pp.54-68
• /
• 2008

The purpose of this study is to investigate the effect of dot pattern size(0.8, 1.8, 2.5, 5, 8), color combination(BG/R, Y/B), area-ratio on image formation. Sets of stimulus and response scales(7 point semantic) were used as experimental materials. The stimuli were 20 color pictures manipulated with the combination of dot pattern size, color combination, and area-ratio using computer simulation. The subjects were 240 female undergraduates living in Gyeongnam-do. Image factor of the stimulus was composed of 5 different components, visibility, attractiveness, cuteness, stability and high class image. In the cuteness, color combination, dot pattern size showed independent effect. In the stability, area-ratio, dot pattern size showed independent effect. Interaction effects of color and area-ratio combination was significant on cuteness. For visibility image 8cm yellow dot/blue background, for attractiveness image BG/R coloration, for cuteness image Y/B coloration and for stability image 0.8cm yellow dot/blue background were effective. According to the variation of dot pattern size, color combination and area-ratio, it was investigated that the images for a dress wearer were expressed diversely, were shown differently in image dimensions, and could be produced to different images.

• 한국재료학회지
• /
• 제28권4호
• /
• pp.221-226
• /
• 2018

The property changes of 18, 14, and 8K green gold alloys for jewelry are observed by adding 0.0, 3.0, and 5.0 wt% of indium (In), respectively. To check the composition of the alloys, an energy dispersive spectroscopy (EDS) analysis is conducted. Color and microstructure analysis is executed through bare-eye, macro camera, UV-VIS-NIR-colormeter, and optical microscope. The melting point, wetting angle, and hardness are measured using TGA-DTA, a wetting angle tester, and a Vickers hardness tester. The EDS analysis result demonstrates that each of the green gold alloys was manufactured with purposed contents. The color analysis result shows that the color of the alloys is similar to the color of the conventional 4 wt%-Cd 18K green gold, and the green color improves as the In content increases. The micro structure analysis result demonstrates that grain refinement improves as the amount of In increases. Enhancements in the melting point, wettability, and Vickers hardness changes appear as the In content increases and Au content decreases. The hardness is up to 260, which implies good durability. Therefore, the results suggest that the proposed 18, 14, and 8K In-added green gold alloys enhance the properties of jewelry products with regard to the green color, castability, and durability.