• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.188-193
• /
• 2005

To provide the various machining materials with excellent quality and dimensional accuracy, high -speed machining is very useful tool as one of the most effective rapid manufacturing processes. However, high-speed machining is not suitable for microscale thin-walled structures because of the lack of the structure stiffness to resist the cutting force. A new method which is able to make a very thin-walled structure rapidly will be proposed in this paper. This method is composed two processes, high-speed machining and filling process. Strong workholding force comes out of the solidification of filling materials. Low-melting point metal alloys are used in order to minimize the thermal effect during phase change and to hold arbitrary shape thin-walled structures quickly during high-speed machining. To verify the usefulness of this method, we will show some applications, for examples thin -wall cylinders and hemispherical shells, and compare the experimental results to analyze the dimensional accuracy of typical parts of the structures.

• 기술혁신연구
• /
• 제15권2호
• /
• pp.1-24
• /
• 2007

In this study, we estimated a CES production function for the Korean economy. We have found in the empirical results that the elasticity of the factor substitution is less than one and that the Korean economy exhibits labor-saving technological progress. In addition, we obtained the regression coefficient of R&D investment on technological change, i.e., the elasticity of R&D investment with respect to the technological change was 0.26% point. It implies that if R&D stock increases by 1%, labor efficiency increases 0.26% point through technological progress which is Hicksian non-neutral. It confirms that innovation-based growth strategy by increasing R&D investment would be effective on the one hand. Some policy consideration on the other might be needed for an increase in employment which is offset by technological progress.

• 수산해양교육연구
• /
• 제19권3호
• /
• pp.502-509
• /
• 2007

This study evaluates thermal comfort by air conditioner temperature raising at the point of time that human body begins to adapt. Thermal comfort according to change of time enters by uncomfortable area gradually at general cold room temperature that magnetic pole is in human body. However, can know that keep continuous thermal comfort in case raise temperature in human body adaptation visual point. Experiments were performed in environmental chamber. Subjects were selected 4 men and 4 women whose life cycle were proved that are similar. The subjects stay in the pretesting room during the 30 minutes and enter the testing room under each experiment conditions. During the experiment, brain wave, electrocardiogram, blood pressure and thermal comfort and sensation responses were measured. In this study, physiological and psychological responses correspond under temperature raising at human body adaptation.

• Journal of Information Technology Applications and Management
• /
• 제15권3호
• /
• pp.261-273
• /
• 2008

The starting point of knowledge generation and management is the enhancement of learning capability and capacity of organizational members. Organizational change for learning environment should be aligned with the change of organizational strategy, structure and processes. The study employed action learning methodology to constitute learning organization processes. The treatment effect to institute learning organization has been successful thanks to the members' zeal and consensus to change the processes. However, not every learning team has been so successful. Some cases complained time consuming where others expect to be helpful for their incentives. The researchers concluded that the most important point for success of the learning organization project should be the support of top management.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.111-113
• /
• 1989

This paper reports the optical characteristics of TeS$_{5}$ Ge$_{5}$ thin film. In phase diagram, TeS$_{5}$ Ge$_{5}$ has the eutetic point with the loweat melting point. Therfore, TeS$_{5}$ Ge$_{5}$ thin film will be melted by Diode Laser with low energy. TeS$_{5}$ Ge$_{5}$ thin films start to change the phase from amorphous to crystalline near 10$0^{\circ}C$, but perfectly change the phase at 28$0^{\circ}C$. As-deposit TeS$_{5}$ Ge$_{5}$ thin film start to change the phase to crystalline in enviroment og 66$^{\circ}C$ 80%RH.circ}C$ 80%RH.

• Journal of the Korean Data and Information Science Society
• /
• 제18권4호
• /
• pp.963-972
• /
• 2007

When a control chart signals that a special cause is present, process engineers must initiate a search for and an identification of the special cause. Knowing the time of the process change could lead to identify the special cause more quickly, and to take the appropriate actions immediately to improve quality. In this paper, we propose the maximum likelihood estimator (MLE) for the process change point when a control chart is used in monitoring the parameters of a process in which the observations can be modeled as a first-order autoregressive(AR(1)) process plus an additional random error.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.126-131
• /
• 1999

In order to reduce the length of off-gauge at FGC(Flying gauge change) point, We adopted dynamic set up in No. 4 cold rolling mill. The conventional set-up of FGC(Flying gauge change) was calculated on the basis of preset values in the process control computer, so the difference between actual strip thickness and preset thickness cause long off-gauge. The dynamic SET-UP control was calculated on the basis of actual strip thickness of FGC(Flying gauge change) point from X-ray gauge of mill entry and No.i stand. We applied dynamic SET-UP control in September last year. Compare to the previous result, the length of off-gauge is reduced by about 36%.

• Communications for Statistical Applications and Methods
• /
• 제19권6호
• /
• pp.771-780
• /
• 2012

In the current analysis, we examine news coverage data widely used in media studies. News coverage data is usually time series data to capture the volume or the tone of the news media's coverage of a topic. We first describe the distributional properties of autoregressive conditionally heteroscadestic(ARCH) effects and compare two major American newspaper's coverage of U.S.-North Korea relations. Subsequently, we propose a change point detection model and apply it to the detection of major change points in the tone of American newspaper coverage of U.S.-North Korea relations.

• 응용통계연구
• /
• 제1권1호
• /
• pp.57-67
• /
• 1987

일반적으로 시계열 자료의 분석은 시간에 대한 모수들의 정상성가정(stationary assumption)하에서 이루어지고 있다. 본 논문에서는 예측하기 힘든 시점에서 분산들이 변화할 수 있는 AR(1) 모형에서 분산의 변화점(variance ahange point)을 추정하는 방법을 제안했으며 모의자료 및 실제자료를 이용하여 다른 방법들과 비교하여 보았다.

• 태양에너지
• /
• 제8권1호
• /
• pp.49-56
• /
• 1988

Thermally treated Korean ilmenite was characterized and used for water splitting to obtain hydrogen by photo-catalytic reaction. Experiments on specific surface area, X-ray diffraction and EDS showed that the formation of FeO, $Fe_2O_3$ and $TiO_2$ ilmenite crystal surface increased the specific surface area with maximum value, phase change of $TiO_2$ at $600^{\circ}C$ and hetrogeneity. The hydrogen evolved in caustic soda solution on these ilmenites indicated that there was a maximum yield point at about $600^{\circ}C$. This point was explained with the change of the surface area due to sintering of newly formed FeO, $Fe_2O_3$ and $TiO_2$, as well as crystal phase change of anatase to rutile at $600^{\circ}C$. Produced hydrogen increased also as the concentration of caustic soda, but become constant at the near 1N solution.