• Korean Journal of Environmental Agriculture
• /
• v.29 no.1
• /
• pp.20-26
• /
• 2010

This study was conducted to reclassify Donggui series based on the second edition of Soil Taxonomy and to discuss the formation of Donggui series in Jeju Island. Morphological properties of typifying pedon of Donggui series were investigated and physico-chemical properties were analyzed according to Soil survey laboratory methods manual. The typifying pedon has very dark grayish brown (10YR 3/2) silt loam A horizon (0~17 cm), gravelly very dark grayish brown (10YR 3/2) silt loam BA horizon (17~42 cm), gravelly very dark grayish brown (10YR 3/2) silty clay loam Bt1 horizon (43~80 cm), brown (7.5YR 4/6) silty clay Bt2 horizon (80~105 cm), and brown (10YR 5/4) silty clay Bt3 horizon (105~150 cm). It is developed in lava plain and are derived from basalt and pyroclastic materials. The typifying pedon contains 1.3~2.1% oxalate extractable (Al + 1/2 Fe), less than 85% phosphate retention, and higher bulk density than 0.90 $Mg/m^3$. That can not be classified as Andisol. But it has an argillic horizon from a depth of 22 to 150 cm and a base saturation (sum of cations) of less than 35% at 125 cm below the upper boundary of the argillic horizon. That can be classified as Ultisol, not as Andisol and Inceptisol. It has udic soil moisture regime, and can be classified as Udalf. Also that meets the requirements of Typic Hapludalf. It has 18-35% clay at the particle-size control section, and have thermic soil temperature regime. Therefore Donggui series can be classified as fine loamy, mixed, thermic family of Typic Hapludalfs, not as fine silty, mixed, thermic family of Dystric Eutrudepts.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.263-272
• /
• 2012

Carbon dioxide, emitted by human activities since the industrial revolution, is regarded as a major contributor of global warming. There are many efforts to mitigate climate change, and carbon dioxide capture and geological storage (CCS) is recognized as one of key technologies because it can reduce carbon dioxide emissions from large point sources such as a power station or other industrial installation. The inclusion of CCS as clean development mechanism (CDM) project activities has been considered at UNFCCC as financial incentive mechanisms for those developing countries that may wish to deploy the CCS. Although the Conference of the Parties serving as the Meeting of the Parties to the UNFCCC's Kyoto Protocol (CMP), at Cancun in December 2010, decided that CCS is eligible as CDM project activities, the issues identified in decision 2/CMP.5 should be addressed and resolved in a satisfactory manner. Major issues regarding modalities and procedure are 1) Site selection, 2) Monitoring, 3) Modeling, 4) Boundaries, 5) Seepage Measuring and Accounting, 6) Trans-Boundary Effects, 7) Accounting of Associated Project Emissions (Leakage), 8) Risk and Safety Assessment, and 9) Liability Under the CDM Scheme. The CMP, by its decision 7/CMP.6, invited Parties to submit their views to the secretariat of Subsidiary Body for Scientific and Technological Advice (SBSTA), SBSTA prepared a draft modalities and procedure by exchanging views of Parties through workshop held in Abu Dhabi, UAE (September 2011). The 7th CMP (Durban, December 2011) finally adopted the modalities and procedures for CCS as CDM project activities (CMP[2011], Decision-/CMP.7). The inclusion of CCS as CDM project activities means that CCS is officially accredited as one of $CO_2$ reducing technologies in global carbon market. Consequently, it will affect relevant technologies and industry as well as law and policy in Korea and aboard countries. This paper presents a progress made on discussion and challenges regarding the issue, and aims to suggest some considerations to policy makers in Korea in order to demonstrate and deploy the CCS project in the near future. According to the adopted modalities and procedures for CCS as CDM project activities, it is possible to implement relevant CCS projects in Non-Annex I countries, including Korea, as long as legal and regulatory frameworks are established. Though Korea enacted 'Framework Act on Low Carbon, Green Growth', the details are too inadequate to content the requirements of modalities and procedures for CCS as CDM project. Therefore, it is required not only to amend the existing laws related with capture, transport, and storage of $CO_2$ for paving the way of an prompt deployment of CCS CDM activities in Korea as a short-term approach, but also to establish the united framework as a long-term approach.

• Journal of Gastric Cancer
• /
• v.6 no.3
• /
• pp.167-172
• /
• 2006

Purpose: The laparoscopy assisted gastrectomy has been increasingly reported as the treatment of choice for early gastric cancer. However, expert surgeons, who have performed a conventional open gastrectomy for a long time, tend to have a negative attitude toward laparoscopic procedures. The aim of this study was to determine the learning curve of a laparoscopy assisted distal gastrectomy (LADG) for a surgeon expert in performing an open gastrectomy and to analyze the factors that have an effect on a LADG. Materials and Methods: Between April 2005 and March 2006, 62 patients underwent a LADG with D1+beta lymph-node dissection. The 62 patients were divided into 10 sequential groups with 6 cases in each group (the last group was 8 cases), and the time required to reach the plateau of the learning curve was determined by examining the average operative times of these 10 groups. Other factors, such as sex, BMI, complications, transfusion requirements, the number of retrieved lymph nodes, and change of postoperative hemoglobin level, were also analyzed. Results: With the $5^{th}$ group (after 30 cases), the operative time reached a plateau (average: 170 min/operation). The differences between before the $30^{th}$ case and after the $31^{st}$ case with respect to changes in the postoperative hemoglobin level, the number of retrieved lymph nodes, the transfusion requirements, and the complications rate were not significant. Conclusion: According to an analysis of the operative time, experience with 30 LADGs in patients with early gastric cancer is the point at which the plateau of the learning curve (7 months) is reached. Abundant experience with a conventional open gastrectomy and a well-organized laparoscopic surgery team are important factors in overcoming the learning curie earlier.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.1-13
• /
• 2009

The purpose of this study was to look into the feasibility of site suitability focused on the potential for environmentally- and water-friendly recreation area development in a wide area(Nakdong River 35km) and to study new methods for providing basic data in regard to the recreation planning over a wide area as well as in application to other sites. The results of this study are as follows. Through classification by mesh method, the site of this study was classified into 42 grids, and by means of the analysis of evaluation indicators, 20 indicators were established and sorted into 4 types of significant recreation activity. According to the results of the analysis for each recreation activity type, there were 8 essentials for water-friendly recreation activity types based on water use while water-friendly recreation types for static activity included 12 sub-essentials. As a result of the first evaluation(the minimum required evaluation) by each classified grid, 32 of the 42 total grids were implemented by the minimum requirements. These grids were usually distributed evenly through the whole site. In terms of the second evaluation(specific site evaluation) results, 6 grids were highly suitable for recreational nature experiences and landscape ecological learning, 4 grids for developing water-friendly recreation for exercise, 1 grid for building water-friendly recreation based on water use, and 4 grids for planning water-friendly recreation for static activity. The results of the grid evaluation of this study could be extended to contiguous grids or reduced. Actual planning for a water-friendly recreation area must change the grid shape or size through boundary adjustments.

• Korean Journal of Poultry Science
• /
• v.17 no.3
• /
• pp.157-166
• /
• 1990

Data are presented concerning the effect of different seasons and sexes during the growing period on broiler performance. Total 38, 451 broiler chickens were raised in spring summer and winter and they were marketed at 6 or 7 weeks of age. Birds were alloted to 118 groups (240∼360 birds per pen) and weighted at termination in order to determine variation in several economic traits between the sex groups. The results obtained were summarized as follows ： 1. The rate of livability of the females were higher than that of the males in all seasons (P＜0.01). 2. Body weights of males were heavier than that of females by 17.4％ at 6 wks, and 19.1％ at 7 wks of age and by 18.0∼19.6％ ,17.6∼18.4％ , and 19.6∼19.3％ in spring, summer, and winter, respectively (P＜0.01). 3. Males consumed more feed than females by 13.3∼135％ . And same trends was noted by season ： 11.7∼13,5％ in spring 175∼15.0％ in summer, and 11.5∼13.0％ in winter. 4. Peed requirement of the females was less than that of the males ： by 5.0∼7.1％, 5.9∼1.0％ , and 5.4∼5.5％ in spring, summer, and winter, respectively (P＜ 0,01). 5. The correlation coefficients between body weight and feed intake in spring were 0.81∼0.87 in males, and 0.84∼0.88 in females and those between body weight and feed requirements were ∼052∼0.51 in males, and -0.17∼-0.45.45 in females. 6. In summer the correlation coefficients between livability and body weight were -0.1∼-0.37 in males, and -0.36∼-0.51 in females, those between body weight and feed intake were 0.66∼0.77 in males, and 0.5∼0.82 in females, and those between body weight and feed requirement were -0.42∼-022 in males, and 0.24∼-0.001 in females. 7. In winter the correlation coefficients between livability and body weight were -0.02∼0.02 in males, -0.18∼-0.19 in females, those between body weight and feed requirements were -0.08∼02 in males, and 0.04∼0.09 in females.

• Journal of Intelligence and Information Systems
• /
• v.17 no.3
• /
• pp.43-61
• /
• 2011

In this research, we propose a dynamic decision making using social context based on ontology. Dynamic adaptation is adopted for the high qualified decision making, which is defined as creation of proper information using contexts depending on decision maker's state of affairs in ubiquitous computing environment. Thereby, the context for the dynamic adaptation is classified as a static, dynamic and social context. Static context contains personal explicit information like demographic data. Dynamic context like weather or traffic information is provided by external information service provider. Finally, social context implies much more implicit knowledge such as social relationship than the other two-type context, but it is not easy to extract any implied tacit knowledge as well as generalized rules from the information. So, it was not easy for the social context to apply into dynamic adaptation. In this light, we tried the social context into the dynamic adaptation to generate context-appropriate personalized information. It is necessary to build modeling methodology to adopt dynamic adaptation using the context. The proposed context modeling used ontology and cases which are best to represent tacit and unstructured knowledge such as social context. Case-based reasoning and constraint satisfaction problem is applied into the dynamic decision making system for the dynamic adaption. Case-based reasoning is used case to represent the context including social, dynamic and static and to extract personalized knowledge from the personalized case-base. Constraint satisfaction problem is used when the selected case through the case-based reasoning needs dynamic adaptation, since it is usual to adapt the selected case because context can be changed timely according to environment status. The case-base reasoning adopts problem context for effective representation of static, dynamic and social context, which use a case structure with index and solution and problem ontology of decision maker. The case is stored in case-base as a repository of a decision maker's personal experience and knowledge. The constraint satisfaction problem use solution ontology which is extracted from collective intelligence which is generalized from solutions of decision makers. The solution ontology is retrieved to find proper solution depending on the decision maker's context when it is necessary. At the same time, dynamic adaptation is applied to adapt the selected case using solution ontology. The decision making process is comprised of following steps. First, whenever the system aware new context, the system converses the context into problem context ontology with case structure. Any context is defined by a case with a formal knowledge representation structure. Thereby, social context as implicit knowledge is also represented a formal form like a case. In addition, for the context modeling, ontology is also adopted. Second, we select a proper case as a decision making solution from decision maker's personal case-base. We convince that the selected case should be the best case depending on context related to decision maker's current status as well as decision maker's requirements. However, it is possible to change the environment and context around the decision maker and it is necessary to adapt the selected case. Third, if the selected case is not available or the decision maker doesn't satisfy according to the newly arrived context, then constraint satisfaction problem and solution ontology is applied to derive new solution for the decision maker. The constraint satisfaction problem uses to the previously selected case to adopt and solution ontology. The verification of the proposed methodology is processed by searching a meeting place according to the decision maker's requirements and context, the extracted solution shows the satisfaction depending on meeting purpose.

• Journal of Korea Trade
• /
• v.25 no.8
• /
• pp.1-24
• /
• 2021

Purpose - This study categorizes factors that influence the utilization of preferential tariffs based on the characteristics of rules of origin (RoO) and identifies and analyzes the influence of these characteristics on the utilization of preferential tariffs and the trade performance of companies. Design/methodology - In this study, we categorized factors that have an influence on the utilization of preferential tariffs based on the characteristics of RoO and investigated and tested the influence of these characteristics on the utilization of preferential tariffs and the trade performance of companies. For empirical analysis, we categorized the characteristics of RoO into restrictiveness, complexity, and uncertainty. We then developed a research model and formulated hypotheses based on previous studies, and tested the hypotheses using statistical software-(SPSS 25.0 and AMOS 18.0.) Findings - Previous studies suggested that each characteristic of RoO is determined by unique features of a Regional Trade Agreement (RTA). This study conducted an empirical analysis on the influence of the characteristics of RoO on the utilization of preferential tariffs and trade performance. The results confirmed that, overall, the characteristics of preferential rules of origin (PRoO) are related to and influence Korean companies' utilization of preferential tariffs and trade performance. As for the degree of the influence, the characteristics were in the order of uncertainty> restrictiveness> complexity. Nevertheless, complexity turned out not to have an influence large enough to change a company's decision on the utilization of preferential tariffs. Based on these results, this study identified unique features of PRoO and related problems for Korean companies that want to utilize preferential tariffs and suggested countermeasures for their effective utilization of preferential tariffs in the future. Originality/value - Companies that want to use preferential tariffs in international trade have to satisfy PRoO. The issue of origin can be regarded as an essential part of an RTA and RoO, are a crucial criterion in using preferential tariffs. The rules are requirements to claim benefits of preferential trade agreements and are the primary reasons companies have trouble in utilizing preferential tariffs. In this sense, this study categorized the characteristics of RoO, which are a key part of an RTA, and surveyed working-level professionals in charge of international trade at Korean companies to investigate the relationship between these characteristics and the utilizations of preferential tariffs and trade performance of the companies.

• Journal of Periodontal and Implant Science
• /
• v.33 no.1
• /
• pp.13-26
• /
• 2003

Periodontal regeneration therapy with bone-substituting materials has gained favorable clinical efficacy by enhancing osseous regeneration in periodontal bony defect. As bone-substituting materials, bone powder, calcium phosphate ceramic, modified forms of hydroxyapatite, and hard tissue replacement polymer have demonstrated their periodontal bony regenerative potency. Bone-substituting materials should fulfill several requirements such as biocompatibility, osteogenecity, malleability, biodegradability. The purpose of this study was to investigate biocompatibility, osteo-conduction capacity and biodegradability of $Na_2O$, $K_2O$ added calcium metaphosphate(CMP). Beta CMP was obtained by thermal treatment of anhydrous $Ca_2(H_2PO_4)_2$. $Na_2O$ and $K_2O$ were added to CMP. The change of weight of pure CMP, $Na_2O$-CMP, and $K_2O$-CMP in Tris-buffer solution and simulated body fluid for 30 days was measured. Twenty four Newzealand white rabbits were used in negative control, positive control(Bio-Oss), pure CMP group, 5% $Na_2$-CMP group, 10% $Na_2O$-CMP goup, and 5% $K_2O$-CMP group. In each group, graft materials were placed in right and left parietal bone defects(diameter 10mm) of rabbit. The animals were sacrificed at 3 months and 6 months after implantation of the graft materials. Degree of biodegradability of $K_2O$ or $Na_2O$ added CMP was greater than that of pure CMP in experimental condition. All experimental sites were healed with no clinical evidence of inflammatory response to all CMP implants. Histologic observations revealed that all CMP grafts were very biocompatible and osseous conductive, and that in $K_2O$-CMP or $Na_2O$-CMP implanted sites, there was biodegradable pattern, and that in site of new bone formation, there was no significant difference between all CMP group and DPBB(Bio-Oss) group. From this result, it was suggested that all experimental CMP group graft materials were able to use as an available bone substitution.

• Journal of Information Technology Applications and Management
• /
• v.21 no.3
• /
• pp.119-133
• /
• 2014

Prior to the 2000s, internal control had not been among the high priority issues in the management's agenda. Since then, however, it has become one of the hottest issues, and has received a significant attention as the means of improving the transparency, sustainability, and competitiveness of a company. The objectives of this paper are to examine if there has been any noticeable changes in the level of internal controls of Korean companies before and after the 2010, and to analyze the underlying drivers and issues thereto. Accounting manipulation and moral hazard were among the factors to cause the Korean financial crisis in 1997 and 2008. Since then, the capital market has had a strong pressure on Korean companies to enhance the transparency of management and accounting while the government has made the laws, requirements, and recommendations to alleviate the moral hazard problems of management and enhance the accounting transparency. Both market and government have driven companies to put more priority on the reliability of financial reporting and the compliance of applicable laws and regulations. Thereby, the market and governmental forces has led companies to enhance the level of internal controls which contribute to the reliability of financial reporting and the compliance The pressure on companies to enhance the level of internal controls may be different across industries. The capital market and government experiencing the severe financial crisis in 1997 and 2008 put even more pressure on financial companies such as banks to upgrade the reliability of financial reporting and the compliance of regulations to the global level than on non-financial companies. A survey is performed on the changes in the level of internal controls of 54 major companies consisting of 10 financial and 44 non-financial companies in Korea. The survey results show that the average level of internal controls of Korean companies has noticeably improved and that the change in the level of control environment factor is higher than that of IT control factor. The analysis on the industry differences shows that financial companies increased the level of control environment factor more than non-financial companies did while non-financial companies upgraded the level of IT control factor more than financial companies did relatively. Among internal control categories, the most improved area since the economic crisis is "Risk Assessment." The global best practices for risk management have been developed primarily in the financial industry and then spread to other industries. The general level of control practices of Korean companies has been improving significantly, but still appears below the global advanced practices.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.3
• /
• pp.303-321
• /
• 2011

The availability and efficient use of the feed resources in Asia are the primary drivers of performance to maximise productivity from animals. Feed security is fundamental to the management, extent of use, conservation and intensification for productivity enhancement. The awesome reality is that current supplies of animal proteins are inadequate to meet human requirements in the face of rapidly depleting resources: arable land, water, fossil fuels, nitrogenous and other fertilisers, and decreased supplies of cereal grains. The contribution of the ruminant sector lags well behind that of non-ruminant pigs and poultry. It is compelling therefore to shift priority for the development of ruminants (buffaloes, cattle, goats and sheep) in key agro-ecological zones (AEZs), making intensive use of the available biomass from the forage resources, crop residues, agro-industrial by-products (AIBP) and other non-conventional feed resources (NCFR). Definitions are given of successful and failed projects on feed resource use. These were used to analyse 12 case studies, which indicated the value of strong participatory efforts with farmers, empowerment, and the benefits from animals of productivity-enhancing technologies and integrated natural resource management (NRM). However, wider replication and scaling up were inadequate in project formulation, including systems methodologies that promoted technology adoption. There was overwhelming emphasis on component technology applications that were duplicated across countries, often wasteful, the results and relevance of which were not clear. Technology delivery via the traditional model of research-extension linkage was also inadequate, and needs to be expanded to participatory research-extension-farmer linkages to accelerate diffusion of technologies, wider adoption and impacts. Other major limitations concerned with feed resource use are failure to view this issue from a farming systems perspective, strong disciplinary bias, and poor links to real farm situations. It is suggested that improved efficiency in feed resource use and increased productivity from animals in the future needs to be cognisant of nine strategies. These include priorities for feed resource use; promoting intensive use of crop residues; intensification of integrated ruminant-oil palm systems and use of oil palm by-products; priority for urgent, wider technology application, adoption and scaling up; rigorous application of systems methodologies; development of adaptation and mitigation options for the effects of climate change on feed resources; strengthening research-extension-farmer linkages; development of year round feeding systems; and striving for sustainability of integrated farming systems. These strategies together form the challenges for the future.