• Fisheries and Aquatic Sciences
• /
• v.22 no.5
• /
• pp.9.1-9.7
• /
• 2019

The study investigated the changes in growth performance, hematological parameters, plasma components, and stress indicators of juvenile starry flounder, Platichthys stellatus, depending on varying exposure to hexavalent chromium. P. stellatus was exposed to waterborne chromium at 0, 50, 100, 200, and 400 ppb for 4 weeks. The result showed that Cr exposure resulted in decreased daily length gain (DLG), daily weight gain (DWG), condition factor (CF), and hepatosomatic index (HIS) in P. stellatus. In terms of hematological parameters, red blood cell (RBC) count, hematocrit (Ht), and hemoglobin (Hb) significantly decreased at 400 ppb after 2 weeks. In terms of plasma components, inorganic analysis was unchanged and cholesterol, an organic component, considerably increased at 400 ppb after 4 weeks. Plasma enzyme components including glutamic oxalate transaminase (GOT) and glutamic pyruvate transaminase (GPT) were significantly increased. Stress indicators such as cortisol and glucose were notably increased over 100 ppb after 4 weeks with increasing chromium concentration. The results indicate that exposure to waterborne Cr induced toxic effects on growth, hematological parameters, plasma components, and stress indicators.

• Journal of Labour Economics
• /
• v.28 no.1
• /
• pp.61-82
• /
• 2005

We investigate wage differentials in Korea in the manufacturing industry, as well as factors affecting structural change in wage determination for the pre- and post-financial crisis regimes. We use the 1995 and 1999 data from the Survey Report on the Wage Structure (SRWS) from the Ministry of Labor. Principal components regression analysis is used to tackle multicollinearity. We employ factor analysis to reduce a set of variables to a smaller number, which contain observed and latent variables. Our empirical investigation provide evidences for changes in wages structure between 1995 and 1999. In 1995, the job quality factor is the most critical in the determination of wages, while in 1999, the industry attributes factor impacts greatly on the wages.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2005.05a
• /
• pp.188-191
• /
• 2005

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2006.05a
• /
• pp.142-145
• /
• 2006

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.5
• /
• pp.285-290
• /
• 2015

The phase change memory material is an active element in phase change memory and exhibits reversible phase transition behavior by thermal energy input. The doping of the phase change memory material with Ga leads to the increase of its crystallization temperature and the improvement of its amorphous stability. In this study, we investigated the effect of GaGe sputtering power on the formation of the phase change memory material including Ga. The deposition rate linearly increased to a maximum of 127 nm and the surface roughness remained uniform as the GaGe sputtering power increased in the range from 0 to 75 W. The Ga concentration in the thin film material abruptly increased at the critical sputtering power of 60 W. This influence of GaGe sputtering power was confirmed to result from a combined sputtering-evaporation process of Ga occurring due to the low melting point of Ga ($29.77^{\circ}C$).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.1
• /
• pp.62-72
• /
• 2008

In this study, an analytical model has been developed to predict the build-up of heat field due to a point heat source in the presence of sharp cross-flow depth change. The model has been applied to investigate the effect of the depth change and flow pattern on the heat field. Model results show that, when there is a sharp depth change in cross-flow direction, the heat transport across the boundary of the depth change is enhanced or diminished according to the increasing or decreasing of the horizontal diffusion flux. Including residual components as well as tidal currents give rise to reduce the effect of the horizontal diffusion on the heat transport because of increasing the advection of heat.

• Journal of Korea Water Resources Association
• /
• v.41 no.11
• /
• pp.1095-1106
• /
• 2008

Climate change and global warming are prevalent all over the world in this century and many researchers including hydrologists have studied on the climate change. This study also studied the impact of climate change on streamflows of a basin in Korea. The SWAT model was used to assess the impacts of potential future climate change on the streamflows of the Daecheong Dam Basin. Calibration and validation of SWAT were performed on a monthly basis for the year of 1982-1995 and 1996-2005, respectively. The impact of seven 15-year(1988-2002) scenarios were then analyzed for comparing it to the baseline scenario. Among them, scenario 1 was set to show the result of doubling $CO_2$, scenario 2-6 were set to show the results of temperature and precipitation change, and scenario 7 was set to show the result of the combination of climatologic components. A doubling of atmospheric $CO_2$ concentration is predicted to result in an maximum monthly flow increase of 11 percent. Non-linear impacts were predicted among precipitation change scenarios of -42, -17, 17, and 42 percent, which resulted in average annual flow changes in Daecheong Dam Basin of -55, -24, 25, and 64 percent. The changes in streamflow indicate that the Daecheong Dam Basin is very sensitive to potential future climate changes and that these changes could stimulate the increased period or severity of flood or drought events.

• The Journal of Korean Medicine
• /
• v.30 no.1
• /
• pp.17-25
• /
• 2009

Objectives: This study was on the pharmaceutical components in purified ginseng total saponin (GTS), coisis semen (CS), the combination of these drugs, and the major component of coicis coixol for the prevention and treatment of obesity. Methods: In this study, to evaluate the effect on the suppression of obesity, high fat diet-induced obese rats were treating with the drugs, the effects on the balance of energy and diet activity were examined, and the change of weight, the change of the intake of diet, body fat rate, etc. were assessed. Results: The results demonstrate that in high fat diet-induced obese white rats, the combination treatment of ginseng total saponin and coicis was effective in suppression of weight gain, reduction of intake of food, and reduction of body fat. Conclusions: The results suggest that a combination treatment with major components of red ginseng total saponin and coicis may be used therapeutically for the suppression and treatment of obesity.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.16-24
• /
• 2023

Coal ash generated from thermal power plants using briquettes contains Si, Al, and Fe components. These components are the main components required for the manufacture of cement clinker. In particular, Al and Fe components form the interstitial phase of cement clinker and have an important effect on the sintering of cement clinker. In this study, a large amount of coal ash was applied as a raw material for cement clinker by content, and the mineral formation process of cement clinker to which coal ash was applied was confirmed by sintering temperature. It was confirmed that the intermediate phase was generated in the sintering temperature range of 1050 ~ 1150 ℃ in the cement clinker to which a large amount of coal ash was applied. As the content of coal ash increased, the production amount of the intermediate phase increased. The phase produced by the addition of coal ash is expected to be converted to calcium silicate phase and interstitial phase and disappear above 1350 ℃. The cement clinker applied with a large amount of coal ash at 1450 ℃ formed well-developed minerals equivalent to the standard cement clinker.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.195-211
• /
• 2015

Flat plate friction lines have been used in the process to estimate speed performance of full-scale ships in model tests. The results of the previous studies showed considerable differences in determining form factors depending on changes in plate friction lines and Reynolds numbers. These differences had a great influence on estimation of speed performance of full-scale ships. This study was conducted in two parts. In the first part, the scale effect of the form factor depending on change in the Reynolds number was studied based on CFD, in connection with three kinds of friction resistance curves: the ITTC-1957, the curve proposed by Grigson (1993; 1996), and the curve developed by Katsui et al. (2005). In the second part, change in the form factor by three kinds of friction resistance curves was investtigated based on model tests, and then the brake power and the revolution that were finally determined by expansion processes of full-scale ships. When three kinds of friction resistance curves were applied to each kind of ships, these were investigated: differences between resistance and self-propulsion components induced in the expansion processes of full-scale ships, correlation of effects between these components, and tendency of each kind of ships. Finally, what friction resistance curve was well consistent with results of test operation was examined per each kind of ships.