• 한국세라믹학회지
• /
• 제36권8호
• /
• pp.782-790
• /
• 1999

The compressibility sinterability sintering behaviour and thermal stability of AlOOH added UO2 pellt and PVA-Al(III) complex added UO2 pellet were investigated respectively. Compared with characteristics of AlOOH added UO2 pellet the green density and the sintered density of PVA-Al(III) complex added UO2 pellet were lowered but the grain size and the pore size of that were more increased in accordance with higher compacting pressure. The AlOOH added UO2 pellet had the grain size of about 14${\mu}{\textrm}{m}$ with monomodal pore size distribution while the PVA-Al(III) complex added UO2 pellet had the grain size of about 42 ${\mu}{\textrm}{m}$ with bimodal pore size distribution. The PVA-A(III) complex added UO2 pellet had a similiar open porosity to the AlOOH added UO2 pellet and a lower resintered density change than the AlOOH added UO2 pellet.

• 지역사회간호학회지
• /
• 제14권3호
• /
• pp.432-444
• /
• 2003

Purpose: This study attempted to verify the effect of Koryo hand therapy on menstrual cramps and dysmenorrhea among college students. Method: This study performed the quasi-experimental design with nonequivalent control group and the pre and post-test design from August 28 to November 4, 2002. The subjects of this experimental study consisted of 64 college students in the nursing college of K University in D city and K college students in K city, who had more than 5.0 GRS score of menstrual cramps. Among them, 16 people belonged to the experimental group A by using Ceramic Seo Am moxa therapy, 16 to the experimental group B by using Seo Am pellet therapy, 16 to the experimental group C by using combination of Ceramic Seo Am moxa therapy and Seo Am pellet therapy and 16 to the control group. Three different kinds of methods were used three times per week for $5{\sim}6$ weeks(a total of $15{\sim}18$ times) interventions were completed. For the experimental group, A Ceramic Seo Am moxa therapy was given for 40 minutes per each treatment; for the experimental group, B Seo Am pellet therapy was given for 4 hours: for the experimental group, C combination of Ceramic Seo Am moxa therapy and Seo Am pellet therapy was given. To measure menstrual cramps, the graphic rating scale (GRS) was used and to measure dysmenorrheal, a dysmenorrhea scale (15 contents) was used, which was modified from Han &Hur's scale (13 contents). Cronbach's was 0.78 in the pre-test, 0.83 in the first post-test, 0.89 in the following post-test. Data were analyzed by one-way ANOVA, 2 test, repeated measures ANOVA, time contrast test and Sheffe test with the SPSS/Win 11.0 program. Results: ? The first hypothesis, 'Among the experimental group A by using Ceramic Seo Am moxa therapy, the experimental group B by using Seo Am pellet therapy and the experimental group C by using combination of Ceramic Seo Am moxa therapy and Seo Am pellet therapy will have different graphic rating scores of menstrual cramps', was supported (F=6.77, p=0.000, Interaction: p=0.000). ? The second hypothesis, 'Among the experimental group A by using Ceramic Seo Am moxa therapy, the experimental group B by using Seo Am pellet therapy, the experimental group C by using combination of Ceramic Seo Am moxa therapy and Seo Am pellet therapy and the control group will have a significantly different level of dysmenorrhea', was supported (F=6.88, p=0.000, Interaction: p=0.000). From the above results, it can be an effective nursing intervention to give Koryo hand therapy to college students who have menstrual cramps and dysmenorrhea. Conclusion: These findings indicate that Koryo hand therapy could be applied to improve the quality of life and to prevent drug misuse among college students who are physically, mentally and psychologically suffering from menstrual cramps and dysmenorrhea. Furthermore, Koryo hand therapy could be developed as an effective Korean alternative and complementary care in the future. and it could also provide a guideline to apply Koryo hand therapy to other pain and difficulties.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.660-664
• /
• 2000

Effect of various kinds of additive such as AlOOH, Al(OH)3, Al2Si2O5(OH)4, Nb2O5, TiO2 and MgO on the properties and microstructures of UO2 pellet has been examined. All the tested dopants had played a role to reduce sintered density and open porosity. It was revealed that the addition of TiO2 made pellet more stable thermally. UO2 pellet doped with 0.2wt% TiO2 was swelled rather than densified after annealing for 24 hrs at 1$700^{\circ}C$. It was attributed to large pore with spherical shape. Titinia and silicon coexisted with Al element were more effective to increase grain size than other additives. It could be also revealed that the formation of liquid phase was the main cause of grain growth.

• 한국세라믹학회지
• /
• 제40권5호
• /
• pp.410-414
• /
• 2003

Characteristics of $UO_{2+x}$ powders oxidized at different temperatures were examined. Pellets were fabricated by adding these oxidation powders and their properties were also investigated. Particle size of the $UO_{2+x}$ powders decreased with increasing oxidation temperature while surface area increased. Only the powders oxidized at 35$0^{\circ}C$ enhanced the strength of green pellet. However, 35$0^{\circ}C$ oxidized powders added pellet had many surface defects. The difference of shrinkage rate between the oxidized and UO$_2$ powders was thought to be the cause of them.

• 한국세라믹학회지
• /
• 제35권8호
• /
• pp.783-790
• /
• 1998

The characterization of the complexation reaction of PVA and Al(III) ion at different pH and the sint-ering behaviour of UO2 containing the PVA-Al(III) complexes were investigated. Compared with pure PVA powder the complexed PVA-Al(III) powder had compacter shape and lower decomposition temperature The major phase of PVA-Al(III) complex decomposed at 90$0^{\circ}C$ was $\alpha$-Al2O3 The PVA-Al(III) complex formed at pH 9 had the lowest relative viscosity the highest Al content of 36% and the smallest particle size of 19${\mu}{\textrm}{m}$ While the pure UO2 pellet appeared with bimodal one. The grain size of the pure UO2 pellet was 7${\mu}{\textrm}{m}$ but that of the PVA-Al(III) complex added UO2 pellet was increased up to 36${\mu}{\textrm}{m}$ The largest grain size was ob-tained when the PVA-Al(III) complex formed at pH9 was added and the PVA-Al(III) complex formed at pH 11 had the greatest effect on increasing pore size.

• 한국세라믹학회지
• /
• 제29권8호
• /
• pp.609-616
• /
• 1992

This study has been investigated on the milling of Aluminium Distearate (ADS) powder and characteristics of the ADS-doped UO2 pellets. As-received ADS powder of the agglomerated particles has not shown any milling effect because of heat generated during planetary milling. But the use of coolant to effectively remove heat generated during milling has been found an effective way in breaking up the agglomerates of ADS powder. The green density of the UO2 pellet decreases with the amount of ADS powder doped. Therefore, in order to get the sintered density of 95% pellet decreases with the amount of ADS powder doped. Therefore, in order to get the sintered density of 95% theoretical density, the 200 ppm ADS-doped UO2 pellet has to be pressed under higher compacting pressure of 3500~4000 kgf/$\textrm{cm}^2$ compared with the ADS-undoped UO2 pellet pressed under around 3000 kgf/$\textrm{cm}^2$. The ADS-dpoed UO2 pellet with even relatively low sintered density of 10.27 g/㎤ exhibits open porosity of 1% while open porosity of the ADS-undoped UO2 pellet is reduced to around 1% only after its sintered density increases to 10.43g/㎤. It is, therefore, concluded that doping of ADS powder significantly contributes to the decrease in open porosity of the UO2 pellet. The dilatometry of the ADS doped UO2 pellet shows the sintering rate curve with the bimodal mode, which could be attributed to a phase reaction between UO2 and ADS. The X-ray diffraction analysis indicates that there occurs not any new phase formed but the shift of the peaks. It would be expected that a phase reaction resulting in solid solution would happen in the temperature range of 130$0^{\circ}C$ to 150$0^{\circ}C$ between UO2 and ADS.

• Nuclear Engineering and Technology
• /
• 제50권2호
• /
• pp.253-258
• /
• 2018

A microcell $UO_2$ pellet, as an accident-tolerant fuel pellet, is being developed to enhance the accident tolerance of nuclear fuels under accident conditions as well as the fuel performance under normal operation conditions. Improved capture-ability for highly radioactive and corrosive fission product (Cs and I) is the distinct feature of a ceramic microcell $UO_2$ pellet, and the enhanced pellet thermal conductivity is that of a metallic microcell $UO_2$ pellet. The fuel temperature can be effectively decreased by enhanced thermal conductivity. In this study, the material concepts of metallic and ceramic microcell $UO_2$ pellets were designed, and the fabrication process of microcell $UO_2$ pellets embodying the designed concept was developed. We successfully implemented the microcell $UO_2$ pellets and produced microcell $UO_2$ pellets. In addition, an assessment of the out-of-pile properties of a microcell $UO_2$ pellet was performed, and the in-reactor performance and behavior of the developed microcell pellets were evaluated through a Halden irradiation test. According to the expectations, the excellent performance of the microcell $UO_2$ pellets was confirmed by the online measurement data of the Halden irradiation test.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.630-633
• /
• 1997

Spent fuel decladding device and dry voloxidizer is to separate the spent pellet from spent fuel rod cut by 250mm and to convert the spent pellet into powder form for reuse and/or disposal of the spent fuel. There are two methods in decladding and voloxidation of spent fuel, that is, wet method with chemical material and dry method with mechanical device. In this study, to examine the fuel rod decladding process and the pellet voloxidation process, the devices for the spent fuel decladding and the pellet voloxidation with dry method are developed. The decladding machine is designed to separate pellets from fuel rod by slitting device. And, the voloxidizer is designed to convert the spent pellet which is ceramic form into powder form by oxidation using the multi step mesh, vibrator, and air in the high temperature environment. The result of this study, such as operation condition et., will be utilized in the design of the machine for demonstration.

• Environmental Engineering Research
• /
• 제18권3호
• /
• pp.163-168
• /
• 2013

In this study, an innovative media, iron mixed ceramic pellet (IMCP) has been developed for arsenic (As) removal from groundwater. A porous, solid-phase IMCP (2-3 mm) was manufactured by combining clay soil, rice bran, and Fe(0) powder at $600^{\circ}C$. Both the As(III) and As(V) adsorption characteristics of IMCP were studied in several batch experiments. Structural analysis of the IMCP was conducted using X-ray absorption fine structure (XAFS) analysis to understand the mechanism of As removal. The adsorption of As was found to be dependent on pH, and exhibited strong adsorption of both As(III) and As(V) at pH 5-7. The adsorption process was described to follow a pseudo-second-order reaction, and the adsorption rate of As(V) was greater than that of As(III). The adsorption data were fit well with both Freundlich and Langmuir isotherm models. The maximum adsorption capacities of As(III) and As(V) from the Langmuir isotherm were found to be 4.0 and 4.5 mg/g, respectively. Phosphorus in the water had an adverse effect on both As(III) and As(V) adsorption. Scanning electron microscopy results revealed that iron(III) oxides/hydroxides are aggregated on the surface of IMCP. XAFS analysis showed a partial oxidation of As(III) and adsorption of As(V) onto the iron oxide in the IMCP.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.209-213
• /
• 2000

Microstructural changes of AlOOH doped UO$_2$pellet after annealing up to 216h have been observed and they were compared with those of the standard pellet. Grain and pore size of UO$_2$pellet increased with the addition of AlOOH and its effect was still validated during annealing. Densification rate was reduced by the addition of AlOOH and it was attributed to coarsened pores with spherical shape. Grain and pore growth was stopped and density increase was the least after 144h of annealing. The variation of pore size resulting from annealing has a linear relationship with that of grain size.